• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.107-114
• /
• 1999

The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.91-100
• /
• 2018

The setting of values on door hinge mounting compensation for door assembly tolerance is a constant quality issue in vehicle production. Generally, heuristic methods are used in satisfying appropriate door gap and level difference, flushness to improve quality. However, these methods are influenced by the engineer's skills and working environment and result an increasement of development costs. In order to solve these problems, the system which suggests hinge mounting compensation value using CAE (Computer Aided Engineering) analysis is proposed in this study. A structural analysis model was constructed to predict the door gap and level difference, flushness through CAE based on CAD (Computer Aided Design) data. The deformations of 6-degrees of freedom which can occur in real vehicle doors was considered using a stiffness model which utilize an analysis model. The analysis model was verified using 3D scanning of real vehicle door hinge deformation. Then, system model which applying the structural analysis model suggested the final adjustment amount of the hinge mounting to obtain the target door gap and the level difference by inputting the measured value. The proposed system was validated using the simulation and showed a reliability in vehicle hinge mounting compensation process. This study suggests the possibility of using the CAE analysis for setting values of hinge mounting compensation in actual vehicle production.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.383-392
• /
• 1992

The objective of this study is to evaluate the impacts on the domestic timber supply potential of forest resources management policies such as the extention of forest management infrastruture and setting aside more forest lands for the provision of environmental goods. To this end, the domestic timber supply functions were estimated using time series data for the period 1970-1990 and were used to predict the future trends in timber production in the Republic of Korea. For this purpose, a set of scenarios based on the forest road density and forest inventory growth were designed for the next 40 years. The timber supply behavior in Korea was found to be different by species group : domestic supply of softwood roundwood is inelastic with respect to its ovum price while that of hardwood elastic. The effect of forest road construction on the domestic timber production seems to be insignificant yet. The model simulation aided by policy scenarios revealed that the future timber supply potential will be largely restricted if the policy option with emphasis on the provision of environmental goods from the forest resources were adopted.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.5
• /
• pp.41-54
• /
• 2023

Smart grid that supports efficient energy production and management is used in various fields and industries. However, because of the environment in which services are provided through open networks, it is essential to resolve trust issues regarding security vulnerabilities and privacy preservation. In particular, the identification information of smart meter is managed by a centralized server, which makes it vulnerable to security attacks such as device stolen, data forgery, alteration, and deletion. To solve these problems, this paper proposes a blockchain based authentication protocol for a smart meter. The proposed scheme issues an unique decentralized identifiers (DIDs) for individual smart meter through blockchain and utilizes a random values based on physical unclonable function (PUF) to strengthen the integrity and reliability of data. In addition, we analyze the security of the proposed scheme using informal security analysis and AVISPA simulation, and show the efficiency of the proposed scheme by comparing with related work.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.1
• /
• pp.38-46
• /
• 2009

Livestock manure is an important source of nutrients for crop production. However, farmers typically do not know the exact nutrient values for livestock manure. In many instances, manure has been viewed as a waste, and as a result it is applied close to the source resulting in over application of nutrients. Thus, the goal of nutrient application has often been applied to reduce the application expense rather than to maximize crop income. This results in wasted money and potentially negative impacts on water quality. Several livestock manure management scenarios were created based on agronomic nutrient requirements using the Utilization of Animal Manure as a Plant Nutrient (AMANURE) software to investigate water quality impacts with the National Agricultural Pesticide Risk Analysis (NAPRA) WWW modeling system. Application of manure at agronomic rates can result in high nitrate-nitrogen losses for some soil types, especially when applied in late fall. The application of manure at an agronomic rate does not necessarily equate to adequate water quality protection, and farmers must take care applying manure at agronomic rates, because nitrate-nitrogen loss potential varies spatially and temporarily. Nutrient loss probability maps for Indiana at 5%, 10%, 25%, and 50% values were created to demonstrate potential water quality impacts when livestock manure is applied to cropland at agronomic rates. The NAPRA WWW system coupled with AMANURE can be used to identify site-specific livestock manure management plans that are environmentally sound and agronomically appropriate.

• Journal of KIBIM
• /
• v.8 no.2
• /
• pp.41-50
• /
• 2018

The current study focused on the utilization of building information modeling (BIM) data in steel-frame structures, which help to reduce project durations because they employ prefabricated structural members that are assembled on-site. In addition, a business process model was proposed using BIM data collected during the preconstruction, structural steel fabrication, and on-site construction phases of an actual steel-frame project. The ultimate expectation is that BIM data support at each phase, as well as the increased understanding among project participants, will result in an increase in project management productivity. The results from the current study are summarized as follows: To implement a BIM capable of application to steel-frame projects and data utilization, existing theories were studied to develop the construction project steps, both generally into the preconstruction (A1), steel fabrication (A2), and on-site construction phases, (A3) and specifically into 19 BIM-applicable phases. Based on the derived BIM-applicable phases, the model elements of the BIM object were identified, and the shortcomings of existing steel-frame projects were ameliorated, resulting in an improved data flow model. Moreover, for the proposed BIM data flow to progress efficiently, the BIM specialist needs to be well-acquainted with the phase-specific three-dimensional (3D) model output, and the infrastructure to construct an error-free 3D model must be provided. Based on the actual construction example, the BIM data utilized steel-frame projects - via production reports, clash checks, two-dimensional (2D) drawings, four-dimensional (4D) simulations, and 3D scanning - to make cooperation and communication among participants easier.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1112-1124
• /
• 2011

The development of computer graphics and Internet technology has created a 3D Web-based virtual world that has transformed the global fashion industry environment. In this study, the application cases of 3D virtual fashion education were analyzed to discuss the necessity and application of a 3D apparel CAD curriculum as part of a special education for global fashion talent at Korean fashion-related colleges. Prior studies, literature, photo data and Internet data (in and out of Korea) were used for this study. The demonstration case studies were conducted for the virtual fashion education 'SLCC 2007' of Buffalo State College (U.S.), 'Ratava's Line (2004)' of SFU/FIT Collaborative Design Project (Canada and U.S.) and '2011 Graduation Fashion Show' of Ueda Fashion College (Japan). The results of the study show that the 3D apparel CAD system (as a core technology of the IT fashion industry) would allow the current mass production concept to change to a new paradigm of 'mass customization' along with new fashion business types that include global fashion companies and Web-based Internet, mobile and virtual-world shopping malls. In addition, it appears that the system should be included in the curriculum of fashion-related colleges and institutes to educate technical designers for the global fashion industry and global fashion talent with comprehensive system operation and management ability, and to promote single proprietor companies.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.1
• /
• pp.95-104
• /
• 2002

This paper presents some studies on the Internet TCP/IP(Transmission Control Protocol-Internet Protocol) traffic over ATM(Asynchronous Transfer Mode) UBR(Unspecified Bit Rate) and ABR(Available Bit Rate) classes of service. Fuzzy logic prediction has been used to improve the efficiency and fairness of traffic throughput. For TCP/IP over UBR, a novel fuzzy logic based cell dropping scheme is presented. This is referred to as fuzzy logic selective cell drop (FSCD). A key feature of the scheme is its ability to accept or drop a new incoming packet dynamically based on the predicted future buffer condition in the switch. This is achieved by using fuzzy logic prediction for the production of a drop factor. Packet dropping decision is then based on this drop factor and a predefined threshold value. Simulation results show that the proposed scheme significantly improves TCP/IP efficiency and fairness. To study TCP/IP over ABR, we applied the fuzzy logic ABR service buffer management scheme from our previous work to both approximate and exact fair rate computation ER(Explicit cell Rate) switch algorithms. We then compared the performance of the fuzzy logic control with conventional schemes. Simulation results show that on zero TCP packet loss, the fuzzy logic control scheme achieves maximum efficiency and perfect fairness with a smaller buffer size. When mixed with VBR traffic, the fuzzy logic control scheme achieves higher efficiency with lower cell loss.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.3
• /
• pp.132-141
• /
• 2012

Climate change impact assessment of cereal crop production in South Korea was performed using land attributes and daily weather data at a farm scale as inputs to crop models. Farmlands in South Korea were grouped into 68 crop-simulation zone units (CZU) based on major mountains and rivers as well as existing land use information. Daily weather data at a 1-km grid spacing under the A1B- and RCP8.5 scenarios were generated stochastically to obtain decadal mean of daily data. These data were registered to the farmland grid cells and spatially averaged to represent climate conditions in each CZU. Monthly climate data for each decade in 2001~2100 were transformed to 30 sets of daily weather data for each CZU by using a stochastic weather generator. Soil data and crop management information for 68 CZU were used as inputs to the CERES-rice, CERE-barley and CROPGRO-soybean models calibrated to represent the genetic features of major domestic cultivars in South Korea. Results from the models suggested that the heading or flowering of rice, winter barley and soybean could be accelerated in the future. The grain-fill period of winter barley could be extended, resulting in much higher yield of winter barley in most CZUs than that of rice. Among the three major cereal grain crops in Korea, rice seems most vulnerable to negative impact of climate change, while little impact of climate change is expected on soybeans. Because a positive effect of climate change is projected for winter barley, policy in agricultural production should pay more attention to facilitate winter barley production as an adaptation strategy for the national food security.

• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.21-34
• /
• 1994

The objective of this study was to develop a user-friendly computer model for economic analysis on the commercial egg production that could help the egg farmer make managerial diagnosis and rational decision in the changing environment. To raise the adequacy of the model, the program was run for every sample and adjusted to fit the data. The model, programmed with Microsoft QuickBASIC, was a user-friendly computer program in supporting the Korean language. The basic analytical tool used in the study was an engineering-type computerized simulation model which incorporates a cost-benefit analysis of a full-time egg farmer. The computer model developed in this study may be the powerful analytical tool used to evaluate both a managerial decision whether to alter the production system and its impact on production, costs, revenue, and profits. Ultimately, the program is expected to enable the egg farmer to make managerial planning and diagnosis. The program can also calculate the values of economic variables at user-chosen incremental values of market eggs and feed prices. It provides the information on the profit and cost. This may lead the egg farmer, by allowing to establish the best managerial strategy, to increase the profit aor to lessen the cost. The results of this study could be utilized in the evaluation and improvement of the management. It also may be utilized for the researchers and guiding farmers in collecting and analyzing the data on the laying hen. In particular, such a program would be potentially useful to researchers who wish to quickly estimate profits associated with various laying hen treatments. The program could also benefit the egg farmer interested in making managerial decisions based on either current or predicted market conditions. The model would make the egg farmer respond actively to the information-oriented society by promoting to use personal computer.