• 한국시뮬레이션학회논문지
• /
• 제12권1호
• /
• pp.1-10
• /
• 2003

Recently, various network protocols have been developed to keep step with the rapid growth of Internet users. For the education of students in the computer networks classes, there have been many attempts to allow students experiment routers setting, operations and management of networks by themselves, in addition to the classroom lectures based on textbooks. One of the attempts is to install expensive real router experiment sets in laboratories for students, and one another is using router and network simulators for virtual experiments. This paper presents the design and implementation of NetSim, a scalable, component-based simulator environment for the network experimentation. NetSim expands the existing component-based JavaSim simulation tool for the education purpose, and it allows the design and experiment of various networks and protocols. For the evaluation of NetSim, it is shown that the network design and RIP-based router setting process is possible in NetSim.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.359-360
• /
• 2017

This paper presents comparison of simulation and experiment in thermal analysis of 3-level PFC. Thermal analysis is necessary to optimize the power conversion system to get higher efficiency. Accordingly, analysis via simulation tools and analytic methods is performed to predict the power losses of converter. Consequently, thermal results of 3-level PFC experiment is compared with thermal analysis.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.560-563
• /
• 2008

A condensed model is proposed for the simulation of forming of sandwich sheet with pyramid core. A corresponding finite element analysis for L-type bending is carried out to prove the accuracy and the effectiveness. Simulation results are compared with those of experiment. Deformation shape and post-buckling behavior by simulation are in good agreement with those of experiment for the considerable range of deformation. From the comparison of force-displacement curve, it is shown that the proposed model shows good prediction of the forming force compared to the experiment. Thus, the effectiveness of the proposed method is sufficiently demonstrated.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.77-87
• /
• 2010

현대는 산업사회에서 정보화 사회로 변화되고 있다. 이에 따라 전쟁 양상도 정보전, 네트워크 중심전, 장거리 정밀전, 로봇전으로 발전되어 고도의 첨단 과학군으로 변화를 시도하고 있다. 이러한 전투발전을 위한 전력창출을 위해 중요시 되고 있는 것이 전투실험이다. 전투실험은 LVC를 통한 입체적인 평가체계를 사용하는 것이 바람직하나, 비용 시간 장소 자원의 제한으로 M&S(Modeling & Simulation)를 통한 모의분석을 주로 활용한다. 하지만 모델 개발을 위한 평가절차에 대한 연구는 많이 이루어지고 있지만, 전투실험에 대한 모델운용상의 모의분석절차의 정립이 미흡하다. 본 연구에서는 전투실험간 모델운용의 타당성 평가체계(VV&A : Verification Validation & Accreditation)가 보완된 모의분석 방법과 절차를 정립하였고, "미래향토사단 군수부대편성의 적절성 평가"를 위해 지상무기효과분석모델(AWAM : Army Weapon Analysis Model)을 통한 후방 지역작전 모의분석 사례를 제시하였다. 본 연구는 신뢰성있는 평가체계를 바탕을 둔 효과적인 모의분석방법을 제시하여 전투실험을 위해 크게 기여할 것으로 판단된다.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.1-5
• /
• 2015

Powder injection molding is an important manufacturing technology to mass produce superalloy components with complex shape. Injection molding step is particularly important for realizing a desired shape, which requires much time and efforts finding the optimum process condition. Therefore computer aided engineering can be very useful to find proper injection molding conditions. In this study, we have conducted a finite element method based simulation for the spiral mold test of superalloy feedstock and compared the results with experimental ones. Sensitivity analysis with both of simulation and experiment reveals that the melt temperature of superalloy feedstock is the most important factor for the full filling of mold cavity. The FEM based simulation matches well the experimental results. This study contributes to the optimization of superalloy powder injection molding process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.666-669
• /
• 2002

Process design of hot forging, asymmetric to symmetric rail, which is used for the turnout of railway express has been investigated. Owing to the big difference in shape between the initial billet and the final forged product, it is impossible to hot forge the rail in a single step. Therefore, multi step forging as well as die design for each step are necessary for the production. The deformation behavior during hot forging has been analyzed by the numerical simulation through commercial FEA software, DEFORM$^{TM}$-2D. Modification of the design and repeated simulation have been carried out on the basis of the simulation result. For comparison with the simulation results, flow analysis experiment using plasticize has been also carried out. The results of the flow analysis experiment showed good agreement with those of the simulation. Therefore, the developed process design could be applied to the actual production.

• 설비공학논문집
• /
• 제22권6호
• /
• pp.353-360
• /
• 2010

Recently H1N1(swine flu) and SARS has been infected widely in the world; we have to care about germs and virus in indoor air environment. The air sterilization system investigated in this study allows occupants to turn on/off and to control the incoming air speed and direction. To predict the performance of air sterilization system without real experiment, a simulation is considered to compare and analyze the performance of the air sterilization systems in a typical office space. Multiple system parameters including volume flow rate and velocity of supply air were varied and investigated during the simulation. The investigation result shows that difference (between simulation and experiment) was about 3.5% in case of minimum air flow rate and about 0.2% in case of maximum air flow rate. The results indicate that multi-zone simulation technique can be used to predict the performance of a sterilization system in personalized office.

• 한국경영과학회지
• /
• 제25권1호
• /
• pp.93-104
• /
• 2000

Passive agents participate in team activities passively, that is, only upon requst, whereas active agents involve themselves voluntarily. Teams composed of active agents are generally believed to perform better than those with passive agents. In this paper, by using a computational simulation model we examine the effect of agent activeness on the efficiency of decision-making teams that access different amout of information. "Team-Soar" is a computational fraemwork that consists of a group of interconnected individual Al agents (i.e., Soar). A simulation experiment using Tearm-Soar was performed. Results of the simulation provide valuable insights on the roles of agent activeness. For example, the impact of having more active agents becomes more sigfniciant as the amout of information to process increases and when the team decision efficiency is important. Some of the results are counter-intultive and therefore provides an opportunity to understand the roles of the agnet activeness more deeply. For instance, the simulation results reveal that having more active agents did not always enhance team efficiency. Conclusively, the simulation experiment demonstrates how computational models contribute to the research of agents social characteristics.teristics.

• 한국시뮬레이션학회논문지
• /
• 제2권1호
• /
• pp.31-44
• /
• 1993

Zeigler's DEVS(Discrete Event Systems Specification) formalism supports formal specification of discrete event systems in a hierarchical , modular manner. Associated are hierarchical, distributed simulation algorithms, called abstract simulators, which interpret dynamics of DEVS models. This paper deals with performance evaluation of P-DEVSIM ++, a parallel simulation environment which implements the DEVS formalism and associated simulation algorithms in a parallel environment. Performance simulator has been developed and used to experiment models of parallel simulation executions in different conditions. The experimental result shows that simulation time depends on both the number of processors in the parallel system and the communication overheads among such processors.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.74-81
• /
• 2005

In this study, we introduce a 3D simulation model to support the design on ACT(Automated Container Terminal) using 3D animation. The developed simulation model simulate virtual operations of ACT and animate the simulated results with real time. We provide several validation points for the design of ACT. And the developed system applied an object-oriented design and C++ programming to increase the reusability and extensibility. We can perform the various simulation experiment and analyze performances to estimate the required number of equipment using developed simulation model.