• Journal of Engineering Education Research
• /
• v.15 no.4
• /
• pp.48-52
• /
• 2012

The purpose of this paper is to design and implement the user motion pattern control system for the simulated vehicle. After analyzing the user motion patterns in the system, the patterns are used to control the moving direction of the simulated vehicle such as forward, backward, turn right, turn left etc. The patterns in the system around are sent to the simulated vehicle in real time. In order to execute the suggested user motion pattern control system, the Kinect is used for executing the system. The Kinect recognizes the specified user motion patterns and it transmits the data to the user motion pattern control system. There are nine kinds of the user motion patterns in the system for controlling the simulated vehicle. In addition to this, some sensors are used to detect the condition of the simulated vehicle. GPS is also used to estimate the current location of the simulated vehicle and to obtain the driving information.

• International journal of advanced smart convergence
• /
• v.6 no.4
• /
• pp.1-8
• /
• 2017

In this work, the effects of fairly influential factors on performance of vacuum system, such as constant pressure and outgassing effect were simulated to propose the optimum design factors. Outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for vacuum systems were suggested based on the simulation results. And, the effects of throttle valve applications on vacuum characteristics were also simulated to obtain the optimum design model of variable conductance on high vacuum system. Simulated vacuum characteristics of the proposed modelling were agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve were schematized as the modelling of throttle valve for the constant process-pressure. Simulation results were plotted as pump-down curve of chamber and variable conductance of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably.

• Journal of Korea Multimedia Society
• /
• v.21 no.10
• /
• pp.1171-1181
• /
• 2018

Most simulated shooting systems are TDM based method and dot type laser has been used. The proposed laser pattern based simulated shooting system is a new approach. It can distinguish shooters by calculating the angle of bar shaped laser pattern by each shooter. Unlike the existing TDM method, it is possible to distinguish shooters and lanes by patterns so that there is no time division restriction like TDM method. It is also possible to recognize overlapped impact points of laser patterns launched by multiple shooters. After the laser pattern based simulated shooting system was implemented, general shot and overlapped shot were tested for each lane. Through experiments, we confirmed the possibility of continuous shooting. In addition, it is possible to separate the pattern by each lane, and 100% recognition result was obtained even if impact points overlapped.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.589-594
• /
• 2000

The fuzzy controllers have been applied to the power system stabilizer due to its excellent properties on the nonlinear systems. But the design process of fuzzy controller requires empirical and heuristic knowledge of human experts as well as many trial-and-errors in general. This process is time consuming task. This paper presents an parameters tuning method of the fuzzy power system stabilizer using the genetic algorithm and simulated annealing(SA). The proposed method searches the local minimum point using the simulated annealing algorithm. The proposed method is applied to the one-machine infinite-bus of a power system. Through the comparative simulation with conventional stabilizer and fuzzy stabilizer tuned by genetic algorithm under various operating conditions and system parameters, the robustness of fuzzy stabilizer tuned by proposed method with respect to the nonlinear power system is verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.556-563
• /
• 2011

Recently, the development of military system is focused on Network Centric Warfare. But, there is no deployed Command and Control System for Missile System in the country. Therefore, Command and Control System for Missile System was simulated to predict feasibility for the future development in this paper. The contents of the design and implementation for simulated system are described in details. Besides, a method for avoiding collisions in 1:N radio communication environment is proposed as the future work. The simulated system in this paper will be a help to developing Command and Control System for Missile System in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.353-356
• /
• 2011

A Signal Receiving system to collect and analyze RF signals should be verified under simulated RF signal environment prior to verification on operation in fields and tested by using simulated RF signals in order to estimate its electrical performance. Generally, typical Signal Receiving system can measure, analyze frequency, pulse modulation, scan modulation, phase modulation on pulse, frequency modulation on pulse etc on RF signals. These RF signals should be generated from simulated RF sources in laboratory. Also the simultaneous RF signals should be simulated on laboratory. This paper describes the results of studying effective simulated RF signal source generation, the methods of the precise RF test signal generation in consideration of operational scenario.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.155-164
• /
• 1999

In this paper, the prototype of SIS(Simulated Implantation System) for human femoral head is introduced. SIS is a software which carries on a virtual femoral head replacement surgery including 3d visualization as well as various numeric analyses between a patient's femur and artificial femur through certain stages of the image processing and of the computer graphics. Also, processes required after acquiring consecutive CT-images and projected image of an artificial femur are discussed, and the corresponding results including prototype of SIS are given.

• KIEAE Journal
• /
• v.11 no.6
• /
• pp.133-138
• /
• 2011

This paper presents energy self-sufficiency simulated in municipal wastewater treatment plants (WWTPs) by adopting solar energy production systems that were simulated by varying azimuth and super-hydrophilic coating on the surface of photovoltaic (PV). Relative to the national average energy consumption in WWTPs, the employment of 100 kW PV system was simulated to achieve 2.75% of energy self-sufficiency. The simulated results suggested that the installation of PVs toward South or Southwest would produce the highest energy self-sufficiency in WWTPs. When super-hydrophilic coating was employed in the conventional PV, 5% of additional solar energy production was achievable as compared to uncoated conventional PV. When 100 kW of PV system was installed in a future test-bed site, Kihyeung Respia WWTP located in Yongin, South Korea, the energy self-sufficiency by solar power was simulated to be 1.77%. The simulated solar power production by azimuth and super-hydrophilic coating will be useful reference for practitioners in designing the solar PV systems in the WWTPs.

• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.60-67
• /
• 1998

Edge detection is the first step and very important step in image analysis. We cast edge detection as a problem in cost minimization. This is achieved by the formulation of a cost function that evaluates the quality of edge configurations. The cost function can be used as a basis for comparing the performances of different detectors. This cost function is made of desirable characteristics of edges such as thickness, continuity, length, region dissimilarity. And we use a simulated annealing algorithm for minimum of cost function. Simulated annealing are a class of adaptive search techniques that have been intensively studied in recent years. We present five strategies for generating candidate states. Experimental results(building image and test image) which verify the usefulness of our simulated annealing approach to edge detection are better than other operator.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.371-378
• /
• 1999

This paper presents an efficient algorithm for loss reduction of distribution system by automatic sectionalizing switch operation in large scale distribution systems of radial type. Simulated Annealing algorithm among optimization techniques can avoid escape from local minima by accepting improvements in cost, but the use of this algorithm is also responsible for an excessive computation time requirement. To overcome this major limitation of Simulated Annealing algorithm, we may use advanced Simulated Annealing algorithm. All constaints are divided into two constraint group by using perturbation mechanism and penalty factor, so all trail solutions are feasible. The polynomial-time cooling schedule is used which is based on the statistics calculation during the search. This approaches results in saving CPU time. Numerical examples demonstrate the validity and effectiveness of the proposed methodology.