• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1084-1087
• /
• 2000

This paper presents a new approach to evaluate the maximum number of simultaneous switching gates of a given combinational circuit. The new approach is based on an iterative method proposed by Sinogi et al. and applies a simulated annealing strategy to search jot a new solution. The experimental evaluation using ISCAS’85 benchmark circuits shows that the proposed approach has attained an excellent improvement compared with other rotated methods including the iterative method.

• Korean Journal of Materials Research
• /
• v.21 no.6
• /
• pp.347-351
• /
• 2011

Hydroxyapatite (HAp) powders with different crystallinities were synthesized at various calcination temperatures through the co-precipitation of $Ca(OH)_2$ and $H_3PO_4$. The degradation behavior of these HAp powders with different crystallinities was assessed in a simulated body fluid solution (SBF) for 8 weeks. Below $800^{\circ}C$, the powders were nonstochiometric HAp, and the single HAp phase was successfully synthesized at $800^{\circ}C$. The degree of crystallinity of the HAp powders increased with an increasing calcination temperature and varied in a range from 39.6% to 92.5%. In the low crystallinity HAp powders, the Ca and P ion concentrations of the SBF solution increased with an increasing soaking time, which indicated that the low crystallinity HAp degraded in the SBF solution. The mass of the HAp powders linearly decreased with respect to the soaking time, and the mass loss was higher at lower crystallinities. The mass loss ranged from 0.8% to 13.2% after 8 weeks. The crystallinity of the HAp powders increased with an increasing soaking time up to 4 weeks and then decreased because of HAp degradation. The pH of the SBF solution did not change much throughout the course of these experiments. These results suggested that the crystallinity of HAp can be used to control the degradation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.377.1-377
• /
• 2001

• BMB Reports
• /
• v.32 no.3
• /
• pp.288-293
• /
• 1999

In order to understand the initial interaction of the substrates malonate, ATP, and CoA with malonyl-CoA synthetase, the catalytic product malonyl-CoA was characterized by NMR spectroscopy and molecular modeling. To assign proton and carbon chemical shifts, two-dimensional $^1H-^1H$ DQF-COSY and $^1H-^{13}C$ HMBC experiments were used. The structure of malonyl-CoA in the solution phase was determined based on distance constraints from NOESY and ROESY spectra. The structures were well-converged around the pantetheine region with the pairwise RMSD value of 0.08 nm. The solution structure exhibited a compact folded conformation with intramolecular hydrogen bonds among its carbonyl and hydroxyl groups. These findings will help us to understand the initial interaction of malonate and CoA with malonyl-CoA synthetase.

• Journal of Life Science
• /
• v.11 no.3
• /
• pp.197-202
• /
• 2001

This study was conducted to investigate the effect of simulated acid solution(SAS) on acid buffering capacity, chlorophyll content and butrient leacking in 4 herb species(Petunia hybrida Vilm, Gomphrena globosa L. Celosia cristat L. Salvia officinallis L) . The acid buffering capacity in the leves was increased in the treatment of pH 3.0 in Celosia L., whereas it was increased at pH 4.0 in Petunia Petunia hybrida Vilm. and Gomprean globosa L.. But, the acid buffering capacity of the leaves did not work at ph 2.0 treatment in 4 herb species. With decreasing pH level, the chlorophyll content of Petunia hybrida Vilm. and Gomphrena globosa L. Was markedly decreased than that of Gelosia cristata L. and Savia officinalis L. As the pH levels decreased from 5.6 to 2.0 the nutrient leaching from leaves was significantly increased in 4 herb species. In pH 4.0 and 5.6, the concentrations of nutrient leaching from leaves were higher in Perunia hybrida Vilm. and Gomphrean globosa L. than Gelosia cristata L. and Salvia officinalis L., Based on the results, there was a great differences in response to SAS among the 4 herb species. Im general, Gelosia cristata L. and Salvia officinalis L. represented a higher tolerance to SAS Petunia hybrida Vilm, and Gomphrena globosa L..

• Corrosion Science and Technology
• /
• v.3 no.6
• /
• pp.251-256
• /
• 2004

Exposure of zinc samples in simulated acid rain solution (SARS) was investigated under a periodic wet-dry conditions using an AC impedance technique. The periodic wet and dry exposure consisted of the immersion of zinc samples in SARS for one hour followed by exposure to 7 hours drying at 60% RH. Phases of the corrosion products were indentified by X-ray diffraction (XRD). The influence of relative humdiity (RH), temperature, and surface inclination on the atmospheric corrosion of zinc is described. The reciprocal of polarization resistance (1/Rp) decreases rapidly during the initial stages then slowly and eventually attains a steady state as exposure time progresses. The average of reciprocal of polarization resistance per cycle, (ARPR) was calculated and found to decrease as number of exposure cycle increases. An increase of temperature enhances the corrsion rate of zinc. The values of ARPR, of a sample inclined at 30 o are lower than those for a sample oriented horizontally. The experiment result shows a pronounced dependence of reciprocal of polarization resistance on RH. Exposure in the presence of carbonate anions gives rise to more protective corrosion products than in nitrate anion solution. The corrosion mechanism during the initial stages of atmospheric zinc corrosion under wet-dry cyclic conditions is suggested.

• Journal of the Korea Society for Simulation
• /
• v.24 no.4
• /
• pp.77-88
• /
• 2015

In this paper, we consider a two-agent single-machine scheduling problem with exponential job-dependent position-based learning effects. The objective is to minimize the total weighted completion time of one agent with the restriction that the makespan of the other agent cannot exceed an upper bound. First, we propose a branch-and-bound algorithm by developing some dominance /feasibility properties and a lower bound to find an optimal solution. Second, we design an efficient simulated annealing (SA) algorithm to search a near optimal solution by considering six different SAs to generate initial solutions. We show the performance superiority of the suggested SA using a numerical experiment. Specifically, we verify that there is no significant difference in the performance of %errors between different considered SAs using the paired t-test. Furthermore, we testify that random generation method is better than the others for agent A, whereas the initial solution method for agent B did not affect the performance of %errors.

• Journal of Internet Computing and Services
• /
• v.6 no.6
• /
• pp.99-106
• /
• 2005

The task scheduling in multiprocessor system Is one of the key elements in the effective utilization of multiprocessor systems. The optimal assignment of tasks to multiprocessor is, in almost all practical cases, an NP hard problem. Consequently various modern heuristics based algorithms have been proposed for practical reason. Recently, several approaches using Genetic Algorithm (GA) are proposed. However, these algorithms have only one objective such as minimizing cost and makespan. This paper proposes a new task scheduling algorithm using Genetic Algorithm combined simulated annealing (GA+SA) on multiprocessor environment. In solution algorithms, the Genetic Algorithm (GA) and the simulated annealing (SA) are cooperatively used. In this method. the convergence of GA is improved by introducing the probability of SA as the criterion for acceptance of new trial solution. The objective of proposed scheduling algorithm is to minimize makespan and total number of processors used. The effectiveness of the proposed algorithm is shown through simulation studies. In simulation studies, the results of proposed algorithm show better than that of other algorithms.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.6-12
• /
• 2015

Thermal fatigue life of the automobile exhaust manifold is directly affected by the restraint force according to the structure of exhaust system and bead shape of the welded joints. In the present study, the microstructural changes and precipitation behavior during thermal fatigue cycle of the 18wt% Cr ferritic stainless steel weld heat affected zone (HAZ) considering restraint stress were investigated. The simulation of weld HAZ and thermal fatigue test were carried out using a metal thermal cycle simulator under complete constraint force in the static jig. The change of the restraint stress on the weld HAZ was simulated by changing the shape of notch in the specimen considering the stress concentration factor. Thermal fatigue properties of the weld HAZ were deteriorated during cyclic heating and cooling in the temperature range of $200^{\circ}C$ to $900^{\circ}C$ due to the decrease of Nb content in solid solution and coarsening of MX type precipitates, laves phase, $M_6C$ with coarsening of grain and softening of the matrix. As the restraint stress on the specimen increased, the thermal fatigue life was decreased by dynamic precipitation and rapid coarsening of the precipitates.

• Environmental Analysis Health and Toxicology
• /
• v.10 no.3_4
• /
• pp.21-28
• /
• 1995

The photodegradation of TCBs in humic acid solutions at pH 7 was evaluated under laboratory sunlight simulated irradiation for 8 and 42 days. The irradiation to TCBs in solution in the presence of humic acid produced trichlorophenols, dichlorophenols in addition to the minor photodegraded products such as dichlorobutadiene, dichlorobenzaldehyde and pentachlorobiphenyls. The formation of photodegradation products indicate that the excited singlet oxygen and solvated electrons play a major contributors to the photodegradation process.