• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.113-120
• /
• 2000

In this study, we composed algorithm for DIAL(Differential Absorption Lidar). We investigated the absorption spectrum of $O_3$, $SO_2$ and $NO_2$ dependent on wavelengths using data base UV-Bank and determined the optimized wavelength model. Here, the selected optimal wavelengths are 292.00(${\lambda}_{on}$), 295.20 (${\lambda}_{off}$) for $O_3$, 299.38(${\lambda}_{on}$), 300.05 (${\lambda}_{off}$) for $SO_2$ and 448.00(${\lambda}_{on}$), 449.85(${\lambda}_{off}$) for $NO_2$. In particular, we established the supposed model of DIAL and simulated the error of measuring distance using the selected optimal wavelength. In the model-I with telescope of 300 mm diameter, laser energy of 3 mJ and transmission of 10000 shots, maximum distances are 4 km for $O_3$ measurement and 5 km for $SO_2$ and $NO_2$ measurements. Also, in the model-II with telescope of 600 mm diameter, laser energy of 30 mJ and transmission of 10000 shots, maximum distances are 13 km for $SO_2$ and $NO_2$ measurements.

• Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.131-135
• /
• 2008

In this study, Fe(VI) was employed as a multi-functional agent to treat the simulated industrial wastewater contaminated with Cu(II)-EDTA through oxidation of EDTA, decomplexation of Cu(II)-EDTA and subsequent removal of free copper through precipitation. The decomplexation of $10^{-4}\;M$ Cu(II)-EDTA species was performed as a function of pH at excess concentration of Fe(VI). It was noted that the acidic conditions favor the decomplexation of Cu(II)-EDTA as the decomplxation was almost 100% up to pH 6.5, while it was only 35% at pH 9.9. The enhanced degradation of Cu(II)-EDTA with decreasing the pH could be explained by the different speciation of Fe(VI). $HFeO_4^-$ and $H_2FeO_4$, which are relatively more reactive than the unprotonated species $FeO_4^{2-}$, are predominant species below neutral pH. It was noted that the decomplexation reaction is extremely fast and within 5 to10 min of contact, 100% of Cu(II)-EDTA was decomplexed at pH 4.0. However, at higher pH (i.e., pH 10.0) the decomplexation process was relatively slow and it was observed that even after 180 min of contact, maximum ca 37% of Cu(II)-EDTA was decomplexed. In order to discuss the kinetics of the decomplexation of Cu(II)-EDTA, the data was slightly fitted better for the second order rate reaction than the first order rate reaction in the excess of Fe(VI) concentration. On the other hand, the removal efficiency of free Cu(II) ions was also obtained at pH 4.0 and 10.0. It was probably removed through adsorption/coagulation with the reduced iron i.e., Fe(III). The removal of total Cu(II) was rapid at pH 4.0 whereas, it was slow at pH 10.0. Although the decomplexation was 100% at lower pH, the removal of free Cu(II) was relatively slow. This result may be explicable due to the reason that at lower pH values the adsorption/coagulation capacity of Fe(III) is greatly retarded. On the other hand, at higher pH values the decomplexation of Cu(II)-EDTA was partial, hence, slower Cu(II) removal was occurred.

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.55-72
• /
• 2009

The timing of hydrocarbon generation and expulsion from source rocks can be evaluated by reconstructing the geohistory of the basin using petroleum system modeling. The Tyee basin is generally considered having a high hydrocarbon generation potential For the southern part of the basin, the basin evolution from a structural and stratigraphic points of view, the thermal history, and the burial history were reconstructed and simulated using numerical tools of basin modeling. An evaluation of organic geochemistry for the potential source rocks and the possible petroleum systems were analysed to improve the understanding of the hydrocarbon charge of the basin. Organic geochemical data indicate that the undifferentiated Umpqua Group, mudstones of the Klamath Mountains, and coals and carbonaceous mudstones in the Remote Member and the Coquille River Member are the most potential gas-prone source rocks in the basin. The relatively high maturity of the southern Tyee basin is related to deep burial resulting from loading by the Coos bay strata. And the heating by intrusion from the western Cascade arc also affects to the high maturity of the basin. The maturation of source rocks, the hydrocarbon generation and expulsion were evaluated by means of basin modeling. The modeling results reveal that the hydrocarbon was generated in all potential source rocks and an expulsion only occurred from the Remote Member.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1960-1972
• /
• 2006

In this thesis, GPS and the electronic mapping were used to realize such a system by recognizing license plate numbers and identifying the location of objects that move at synchronous times with simulated movement in the electronic map. As well, throughout the study, a camera attached to a PDA, one of the mobile devices, automatically recognized and confirmed acquired license plate numbers from the front and back of each cu. Using this mobile technique in a wireless network searches for specific plate numbers and information about the location of the car is transmitted to a remote sewer. The use of such a GPS-based system allows for the measurement of topography and the effective acquisition of a car's location. The information is then transmitted to a central controlling center and stored as text to be reproduced later in the form of diagrams. Getting positional information through GPS and using image-processing with a PDA makes it possible to estimate the correct information of a car's location and to transmit the specific information of the car to a control center simultaneously, so that the center will get information such as type of the cu, possibility of the defects that a car might have, and possibly to offer help with those functions. Such information can establish a mobile system that can recognize and accurately trace the location of cars.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.519-530
• /
• 2013

To provide a reliable tool for runoff simulations of ungauged watersheds upstream of reservoirs, a daily runoff simulation model, Tank model, is restructured, the parameter regionalization of the model is conducted, and the model's applicability is evaluated. Taking into account the characteristics of runoffs from the watersheds, a three-tank model is employed. The percolation process of the model's third tank is eliminated, considering the water budgets of the watersheds, and its evapotranspiration component is improved, reflecting the conditions of meteorological observation in South Korea. The sensitivity analysis of the model shows that the model's behaviors, varying with a sensitive parameter, ${\alpha}$, are reasonable. The regional parameter estimation equations are determined, using the characteristics and land uses of the watersheds as variables. The model is applied for the runoff simulations of three watersheds and the water stage simulation of one reservoir, and the simulation results are then compared with the observed values, which prove to be in close agreement with the observations. In addition, the results from simulating inflows of twenty-four reservoirs using the model show that the averages of evapotranspiration rate and runoff rate are 42.8% and 56.6%, respectively, which are resonable. Consequently, it is concluded that the model is practically applicable to simulating runoffs from watersheds upstream of reservoirs, and simulated inflow data are useful for watershed management and reservoir planning, design, and operation.

• Journal of Korea Water Resources Association
• /
• v.38 no.8 s.157
• /
• pp.655-664
• /
• 2005

A real-time monitoring and modeling system (RTMMS) for rainfall-induced turbidity flow, which is one of the major obstacles for sustainable use of reservoir water resources, is under development. As a prediction model for the RTMMS, a laterally integrated two-dimensional hydrodynamic and water quality model, CE-QUAL-W2 was tested by simulating the temperature stratification, density flow regimes, and temporal and spatial distributions of turbidity in a reservoir. The inflow water temperature and turbidity measured every hour during the flood season of 2004 were used as the boundary conditions. The monitoring data showed that inflow water temperature drop by 5 to $10^{\circ}C$ during rainfall events in summer, and consequently resulted in the development of density flow regimes such as plunge flow and interflow in the reservoir. The model showed relatively satisfactory performance in replicating the water temperature profiles and turbidity distributions, although considerable discrepancies were partially detected between observed and simulated results. The model was either very efficient in computation as the CPU run time to simulate the whole flood season took only 4 minutes with a Pentium 4(CPU 2.0GHz) desktop computer, which is essentially requited for real-time modeling of turbidity plume.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.57-72
• /
• 2018

Organic agriculture seeks sustainable agriculture. Organic agriculture is based on circulating agriculture of a family farm unit. However, as of the end of 2016, only 33 out of the total organic farming farms were implementing Crop-Livestock cycling organic farming. The reason seems to be a matter of income after all. The optimal size combination refers to the scale by which family farms can maintain their quality of life while engaging in farming activities. In other words. it is a farm scale that maintains optimal income through stable labor costs. In the meantime, there has been no previous study on the optimal economical combination of Crop-Livestock cycling farming. Choi (2016) analyzed whether the economies of scope (EOS) were realized in the combined production by using the management data of the farmers who practiced Crop-Livestock cycling organic farming for four years. As a result, it has been revealed that the EOS measurement value is 0 or more so the economies of scope are being realized. Therefore, the purpose of this empirical analysis is to identify farm incomes under this circumstance. It is assumed that the optimum production is achieved by balancing the total income curve and the total cost curve in the optimal scale production range. The results of the analysis are as follows. First, the income after the conversion to Crop-Livestock cycling farming was 44,789,280 won, the sum of the seedling-livestock sector, which was 17,873,120 won higher when the non-Crop-Livestock cycling farming was assumed. The same is true for 2014 and 2015. The reason for this is that pig droppings were composted from organic seedlings, and the cost of selling pork was 150,000 won/per pig more expensive even though the manufacturing cost of organic feeds was higher than the purchasing cost. Secondly, this study simulated the result that the economic index varies when the farm size combination is changed by the farm size of 100% standard (S100) as of 2014. S130 is the increase in size from 100% of 2014, whereas S30 is the result of 3ha crop and 66 livestock (pigs). As a result of this simulation, Crop-Livestock cycling farming income decreased more than non-Crop-Livestock cycling farming as the farm size decreased, whereas the income decreased as the farm size increased. When the size was reduced below S50, the income tended to decrease. In this situation, EOS changed in the same direction. The results showed that when the farming size was reorganized and reduced to 50% compared to 2014, the income and income difference was the highest. At the same time, economies of scope (EOS) were the highest at 0.12985. In other words, it was found that the income of farm houses in a family farm unit sector was the best in the combination of 1.5ha crop agriculture and 110 livestock (pigs).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.10 no.3
• /
• pp.139-144
• /
• 2005

To investigate the long-term variation of water qualities, we have daily monitored physio-chemical characteristics of surface water in the Geum River estuary from June 1996 to April 2004. We found that the water qualities were determined by three dominant factors : 1. fluvial input from Geum River ($28.3\%$), 2. chemical processes such as nitrification and phosphate addition originated from sediment resuspension and domestic sew- age input ($18.6\%$), 3. biological processes such as nutrient consumption by primary producers ($13.5\%$). The factor 1 (fluvial input) effectively affected the water quality of the estuary particularly during the normal or low river discharge. The factor 2 (chemical processes) and the factor 3 (biological processes) showed distinct seasonal differences due to their relative strengths of biological activities. The factor 3 was a governing parameter during the period of spring algal bloom in 2004. For the spring period, an empirical equation derived from the multi-regression analyses showed that the in-situ chlorophyll-a distributions in the estuarine water were successfully simulated by the phosphate concentrations and N/P ratios. Therefore we suggest that phosphate functions as a limiting factor for the primary productivity in the Geum River estuary for the dry season, especially during spring.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2004

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. Here was carried out an experiment to observe the heat transfer in the cable penetration fire stop system made of DOW CORNING products. The dynamic heat transfer occurring in the fire stop system is formulated in a parabolic partial differential equation subjected to a set of initial and boundary conditions. And it was modeled, simulated, and analyzed. The simulation results were illustrated in three-dimensional graphics and were compared with experimental data. Through the simulations, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable streams. It also was found that the dynamic heat transfer through the cable streams was one of the most dominant factors, and the feature of heat conduction could be understood as an unsteady-state process. It is certain that these numerical results are useful for making a performance-based design for the cable penetration fire stop system.

• Journal of Biomedical Engineering Research
• /
• v.24 no.6 s.81
• /
• pp.533-541
• /
• 2003

In the paper. the health card system to integrate several cards into one card for protecting patient's privacy and security problems is proposed. Firstly, it is defined the minimal data set for integrating several patient cards into one card using IC card, and developed the issuing system to issue the integrated patient IC card. In order to secure and certificate a patient's personal information. the integrated patient IC card has applied 3-DES and the PKI certificate authority based Windows 2000 is established. The receipt and reservation system for taking care of a healthcare has developed to cooperate with the existing hospital computer system. The integrating patient IC card system proposed in this paper is implemented to 11 hospitals and used for 1.000 patients. On the result of the simulation. the proposed system can receive or reserve for a patient to take care of healthcare in the simulated hospitals and also establish the basis of the mechanism to share a medical information.