• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.375-383
• /
• 2005

본 논문은 국내 최초의 액체산소와 케로신을 사용한 액체로켓엔진용 터보펌프의 개발에 관하여 기술하였다. 개발 중인 터보펌프는 가스 발생기 형식의 30톤급 액체로켓엔진에 사용 가능하다. 본 터보펌프는 일축에 조립된 산화제펌프, 연료펌프, 충동형 터빈, Inter-propellant seal(IPS)로 구성되어 있다. IPS는 액체산소와 케로신이 상호작용을 하지 않도록 차단해주는 장치이다. 현재 모사매질(물 및 공기)을 사용하여 각 단품 및 시스템 성능시험을 마쳤으며 hot firing 시험이 대기 중에 있다.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.117-124
• /
• 2001

This paper presents turbulent characteristics of an impinging F-O-O-F type injector in which fuel ad oxidizer impinge on each other to atomize under the different momentum ratio. Water was used as an inert simulant liquid instead of fuel and oxidizer. The droplet size and velocity in the impinging spray flow field were measured using a PDPA. The gradient of the spray half-width(b$_2$) along the long-axis direction declined throughout the entire spray flow field with increasing the momentum ratio from 1.19 to 6.48. However, the gradient of the half-width(b$_1$) along the short-axis direction decreased with increasing the momentum ratio. The turbulence intensity and turbulent kinetic energy were converged into the center of the center of the initial region with increasing the momentum ratio. As the momentum ratio increased from MR=1.19 to MR=6.48, the turbulent shear stress decreased. The results of this study can be used for the design of an impinging type injector for liquid rackets.

• 한국분무공학회지
• /
• 제28권2호
• /
• pp.75-88
• /
• 2023

In this paper, the atomization characteristics of bi-swirl coaxial injectors for a 420 N-class bipropellant thruster were investigated. Three types of injectors, namely closed-type, open-type, and screw-type, were manufactured and designed to have the same spray angle and injection pressure drop. Water was used as a simulant, and cold-flow tests were conducted under ambient temperature and pressure conditions. Since the inner and outer injectors were designed to be the same type, only the inner fuel injectors that were easy to measure were used. Using a phase doppler particle analyzer, the velocity and diameter of atomized droplets were measured. Closed-type swirl injector exhibited droplet distributions with relatively high velocities and small SMD compared to the other two injectors. Open-type swirl injector formed droplets with reverse velocities in the center region and had a large recirculation zone. Screw-type swirl injector showed a sharp decrease in droplet velocity and size with radial distance from the liquid film breakup point. For the same design requirements, the closed-type swirl injector has superior atomization performance.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.636-643
• /
• 2024

The coolability of the debris bed with a simulant of solidified corium is experimentally studied, focusing on the effects of the structure of the axial stratified debris bed on the dryout heat flux (DHF). DHF was obtained for the four structures with different particle sizes for the axial stratified debris bed under top flooding. The experimental results show that the dryout position of the axial stratified debris bed is formed at the stratified interface indicated by the temperature rise, and the DHF of the axial stratified bed is much lower than that of the homogeneous bed packed with the upper small particles. To predict the dryout heat flux of the stratified debris beds, by considering the properties of the mixed area, a one-dimensional dryout heat flux model of the porous medium is derived from a water and vapor momentum equation for porous medium, two-phase permeability modifications, interfacial drag, and the correlation between capillary pressure and liquid saturation and verified with the experimental data. The modified model can give reasonable results under different structures.

• 한국추진공학회지
• /
• 제13권3호
• /
• pp.20-26
• /
• 2009

30톤급 액체로켓엔진용 터보펌프에 대하여 실매질을 사용하여 성능시험이 이루어졌다. 산화제펌프와 연료펌프에는 각각 액체산소, 케로신의 실매질을 사용하고 터빈에는 고압의 상온 수소가스가 사용되었다. 터보펌프는 설계점과 탈설계점의 전 영역에서 안정적으로 작동하였고 요구되는 성능 조건을 만족 시켰으며 이로써 엔진 서브시스템 수준의 터보펌프 개발이 성능 측면에서 검증되었다고 볼 수 있다. 본 논문에서는 단일 운전으로 세 운용점에서 총 75초간 작동된 경우의 시험결과를 소개하였다. 펌프와 터빈의 성능 특성 관점에서 터보펌프 조립체의 실매질 성능시험 결과와 터보펌프 구성품의 상사 성능시험 결과가 양호하게 일치하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.359-365
• /
• 2008

30톤급 액체로켓엔진용 터보펌프에 대하여 실매질을 사용하여 성능시험이 이루어졌다. 산화제펌프와 연료펌프에는 각각 액체산소, 케로신의 실매질을 사용하고 터빈에는 고압의 상온 수소가스가 사용되었다. 터보펌프는 설계점과 탈설계점의 전 영역에서 안정적으로 작동하였고 요구되는 성능 조건을 만족시켰으며 이로써 엔진 서브시스템 수준의 터보펌프 개발이 성능 측면에서 검증되었다고 볼 수 있다. 본 논문에서는 단일 운전으로 세 운용점에서 총 75초간 작동된 경우의 시험결과를 소개하였다. 펌프와 터빈의 성능 특성 관점에서 터보펌프 조립체의 실매질 성능시험 결과와 터보펌프 구성품의 상사 성능 시험 결과가 양호하게 일치하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.61-64
• /
• 2008

액체추진제 추력기의 경우, 성능평가를 위해 진공연소시험이 필수적으로 요구되며 이때 공급되는 추진제의 유량이 비추력 계산시 중요한 영향을 미치는 인자가 된다. 본 논문에서는 정밀 유량측정에 대한 기초연구로서, 코리올리 유량계를 이용하여 모의추진제인 DIW를 사용한 수류시험을 수행하였으며 연속모드 및 펄스모드 각각에 대해 결과분석이 이루어졌다. 마지막으로 해외연소시험 데이터와의 비교를 통해 수류시험 결과와의 검증을 확인하였다.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1005-1014
• /
• 1996

An experimental investigation has been carried out to examine the influence of injector design variables and operating conditions on the resultant drop size for triplet impinging streams injectors. The variables studied in this investigation are pressure drop, impinging angle, orifice length to diameter ratio, and impinging point distance. Droplet-size data are obtained using water as the propellant simulant by Malvern Particle Analyzer System. Drop size decreases with increasing impinging angle and pressure drop while other injector parameters remain constant at the same point. But it is found that there is no noticeable droplet-size change which results from change in orifice length to diameter ratio or impinging point distance within the investigated range.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.46-52
• /
• 2017

High-frequency combustion instabilities may occur during the development of feasible engine combustors. These instabilities can result in irreparable damages to the wall of combustors or the degradation of engine performance. So, it is essential to identify injectors that have high stability characteristics during the early stages of development. The objective of present study was to assess the stability of coaxial injectors and an impinging injector with different recess lengths in order to develop stable injectors optimally. Stability margin was evaluated based on the distance from operating condition to the unstable regions. A simulating combustion test method was used to analyze the stability of injectors. A small-scale combustion chamber was designed to simulate the first tangential acoustic mode of the actual combustor. Gaseous oxygen and a mixture of methane and propane were used as simulant propellants to satisfy their flow similarity to the actual propellants of a combustor in a liquid rocket combustor. The results indicated that injectors having small recess lengths showed relatively large combustion stability margins. For the injectors of large recess lengths, instability regions with large and super-large amplitude oscillations were observed. Thus, injector with shorter recess lengths had a higher stability than that of longer one due to the different mixing processes.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.210-217
• /
• 2022

Chemical warfare agents(CWA) such as nerve agents and vesicating agents show lethality by skin contamination. Skin protection, therefore, is one of the top priorities to deal with the growing threat from CWA. In an attempt to develop the most effective topical skin protectant(TSP), candidate substances including PFPE(perfluorinated polyether), PTFE(polytetrafluoroethylene), glycerin, and polysaccharides were evaluated in forms of various formulations against nerve agent simulant DMMP(dimethylmethyl phosphonate) penetration. The protective efficacy of the formulation against DMMP penetration was estimated as the onset time of color change of the KM9 chemical agent detection paper. Based on this study, it was found that several PFPE- and glycerin-based formulations exhibit remarkably superior efficacy as a protective cream. This protective cream is expected to be used as TSP for military application after further research.