• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2001

As computer power is increased, refined finite element models are employed for structural analysis. However, it is difficult and expensive to use refined models in the design stage. The refined models especially cause problems in the preliminary design where the design is frequently changed. Therefore, simplified models are needed. The simplification process is regarded as an empirical technique. Simplified and equivalent finite element model of a structure has been studied and used in the preliminary design. A general approach to establish the simplified and equivalent model is presented. The generated simple model has satisfactory correlation with the corresponding refined finite element model. An optimization method, the Goal Programming algorithm is used to make the simple model. The simplified model is used for the design change and the changed design is recovered onto the original design. The presented method was verified with three examples.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.10
• /
• pp.854-862
• /
• 2002

In the previous research, a simplified correlation method was developed as an easy prediction tool for comparing energy use of cooling plants. The purpose of this paper is to test the applicability of this method for economic evaluation with two zones of a 20-story commercial building in Seoul. The results of this method were compared with the DOE-2 simulation and actual measured data. Then, Comparisons of life cycle cost were carried out for three types of cooling plants. Testing of one zone showed good agreement of within 10% error in cooling energy use and within 2% error in LCC. But testing of the other zone indicated that the use of this method were invalid when input variables were used beyond its valid range.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.267-280
• /
• 1997

This paper deals with the development of simplified methods to predict the creep deformation of reinforced concrete beams. The layer approach based on a degenerate kernel of compliance function in form of Dirichlet series is mentioned and a simplified analytical method derived from the equilibrium equations and compatibility conditions is proposed to overcome the sophisticated calculation procedures in the classical creep analysis. Correlation studies between analytical and experimental results and design codes are conducted with the objective to establish the validity of the proposed methods. Besides, various parameter studies are conducted with the objective to identify the effects of cracking, steel ratio and sectional shape in the creep deformation and the obtained results are discussed.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.6
• /
• pp.1083-1093
• /
• 2010

Objective : The purpose of this study was to examine the relationship of the oral health behavior of oral prophylaxis clients and some residents in a community to their simplified oral environment index. Methods : The subjects in this study were 520 people who had their teeth cleaned in the oral prophylaxis practice lab in the department of dental hygiene at J health college. A survey was conducted from March 23 to June 3, 2010, by way of the self-reported questionnaire. The data materials are analyzed by general characteristics frequency and ratio, the relationship of oral health behavior and sex, age, scaling experience, simplified oral hygiene index $x^{2}$ test analysis. Results : 1. Concerning links between gender and oral health behavior including daily toothbrushing frequency, the largest group of the respondents brushed their teeth three times a day(p<0.05). As to educational experiences on toothbrushing method and the use of oral hygiene supplies, the women had more educational experiences than the men(p<0.05). 2. Regarding connections between age and oral health behavior involving daily toothbrushing frequency, the largest number of the respondents brushed their teeth three times a day in every age group (p <0.001). As for educational experiences on toothbrushing method, those who were in their 50s and up(64.7%) learned about that, and they had more educational experiences with age(p<0.05). As for scaling experiences, the older respondents had their teeth scaled more often (p<0.001). 3. As to relationship between scaling experiences and oral health behavior, there were differences in toothbrushing frequency according to scaling experiences(p <0.05). Regarding educational experiences on toothbrushing method, those who had their teeth cleaned received more toothbrushing education(p<0.001). Concerning smoking, the nonsmokers had more experiences to get their teeth cleaned (p<0.001). 4. As for links between simplified oral environment index and oral health behavior including a time for toothbrushing, the respondents who did toothbrushing after every meal(80.4%) had good simplified oral environment indexes(p<0.05). 5. In regard to relationship between simplified oral environment index and oral health behavior, oral environment index had a positive correlation to the use of oral hygiene supplies( r=0.129**), toothbrushing time(r=0.116**) and educational experiences on toothbrushing method (r=0.099**). Smoking(r=-0.092**) had a negative correlation to that. Conclusion : The above-mentioned findings illustrate that oral health behavior is one of crucial factors to affect oral health status and oral environment care. Therefore oral prophylaxis practice lab visitors should receive education on the right toothbrushing method and the use of oral hygiene supplies to promote their oral health, and an incremental oral health care system that involves regular scaling should be introduced.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.44-55
• /
• 1993

In this paper, we proposed a new optical method for the efficient recognition of Korean characters. There are six filters in the proposed method which employed the concepts of amplitude-modulated phase-only filter(AMPOF) and spatial frequency modulation(SFM). Here, amplitude modulation is used to achieve improved correlation discrimination and SFM is to reduce the number of filters. We also used a simplified synthetic discriminant function(SDF) for distortion invariance of input image. In order to recognize the partial rotation invariant Korean characters, the proposed distortion invariant minimum average correlation energy (MACE) filter is synthesized SFM, partial rotation invariant filter (PRIF), AMPOF and MACE for partial rotation invariance in the frequency domain. The advantage of the proposed filters is to supress the sidelobes of cross correlation peak away from the autocorrelation peak and to produce sharp correlation peaks. We performed simulation and optical experiment for some of Korea characters using the proposed method. The results show that the proposed method has more improved discriminant ability and reduced processing time than the conventional methods.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.373-382
• /
• 2013

The weight of floating offshore plant, such as an FPSO(Floating, Production, Storage, and Off-loading unit) and an offshore wind turbine, is important for estimating the amount of production material and for determining the production method. Furthermore, the weight is a factor which affects in the building cost and production time of the floating offshore plant. Although the importance of the weight has long been recognized, the weight has been roughly estimated by using the existing design and production data, and designer's experience. To solve this problem, a simplified model for the weight estimation of the floating offshore plant using the statistical method was proposed in this study. To do this, various data for estimating the weight of the floating offshore plant were collected through the literature survey, and then the correlation analysis and the multiple regression analysis were performed to generate the simplified model for the weight estimation. Finally, to examine the applicability of the developed model, it was applied to examples of the weight estimation of an FPSO topsides and an offshore wind turbine. As a result, it was shown that the developed model can be applied the weight estimation process of the floating offshore plant at the early design stage.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.86.1-86
• /
• 2002

Polarity correlation is a simplified version of the usual, having a possibility of real-time processing without any reduction of precision. In this paper, its applicability in deterministic signals is first explored generally, by theoretical or numerical analysis of four kinds of the typical signals. Then, based on the results, its two applications are proposed, that are detection and demodulation of FSK signals in digital communication, and time delay estimasion in ultrasonic A-mode measurement. The effectiveness of the proposed applications is confirmed by its superior implementation ability and the results of numerical experiments under practical circumstances.

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.391-400
• /
• 2007

To identify the spatial distribution pattern of water quality in Masan Bay, Pearson's correlation as a common statistic method and Moran's I as a spatial autocorrelation statistics were applied to the hydrological data seasonally collected from Masan Bay for two years ($2004{\sim}2005$). Spatial distribution of salinity, DO and silicate among the hydrological parameters clustered strongly while chlorophyll a distribution displayed a weak clustering. When the similarity matrix of Moran's I was compared with correlation matrix of Pearson's r, only the relationships of temperature vs. salinity, temperature vs. silicate and silicate vs. total inorganic nitrogen showed significant correlation and similarity of spatial clustered pattern. Considering Pearson's correlation and the spatial autocorrelation results, water quality distribution patterns of Masan Bay were conceptually simplified into four types. Based on the simplified types, Moran's I and Pearson's r were compared respectively with spatial distribution maps on salinity and silicate with a strong clustered pattern, and with chlorophyll a having no clustered pattern. According to these test results, spatial distribution of the water quality in Masan Bay could be summed up in four patterns. This summation should be developed as spatial index to be linked with pollutant and ecological indicators for coastal health assessment.

• Journal of Broadcast Engineering
• /
• v.6 no.2
• /
• pp.139-147
• /
• 2001

Since various noises degrade not only image quality but also compression efficiency in MPEG and H.263, pre-processing is necessary to reduce spatial and temporal noise and to increase ceding efficiency as well. In this paper, we propose a simplified method for noise detection, spatial and temporal noise reduction. Noise detection is based on correlation of the current pixel with its neighboring 4 pixels. Spatial noose reduction utilizes a non-rectangular median filter that is less complex than the conventional rectangular median filter. The proposed temporal filter is an IIR average filter using LUT(Look-up Table) to enhance subjective video quality. The proposed pre-processing method is very simple and efficient.