• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.103-112
• /
• 1994

Various kinds of fatigue failures of ocean structures were reported and the importance of fatigue life estimation at the design state is significantly recognized and various kinds of analysis approaches have been discussed. In this paper characteristics of the simplified method proposed here and the spectral method are studied and the elements of the approach are discussed. The merits and demerits of the forementioned analysis schemes are studied and the relating parameters such as SCF and S-N curves are also investigated. The simplified fatigue analysis approach and tile spectral fatigue analysis technique is applied for the analysis of bracing members of typical semi-submersible drilling rig structure for the verification of the usage of two methods and the sensitivity study has been performed using the simplified method. The result from the spectral analysis give a more realistic picture of the fatigue life of the offshore structure considered here.

• Journal of Mechanical Science and Technology
• /
• 제16권12호
• /
• pp.1627-1632
• /
• 2002

In this paper, a simplified ultrasonic CT system, which uses the information in three directions, that is, 90°, ＋45° and －45°about the inspection plane, is applied to the high strength steel, and the frequency analysis method for enhancing the C scan or CT image is developed. This frequency analysis method is based on the frequency response property of the material. By comparing the magnitudes in the frequency domain, the special frequency which shows a significant difference between the welded joint and base material was found and used to obtain a C scan or CT image. Experimental results for several kinds of specimens, having a welded joint by electron beam welding, a weld joint by arc welding, on a fatigue crack, showed that the obtained C scan or CT image has better resolution than the results of previous experiments using the maximum value of the received waveform.

• Industrial Engineering and Management Systems
• /
• 제4권2호
• /
• pp.192-197
• /
• 2005

Among many amplitude parameters, Kurtosis (4-th normalized moment of probability density function) is recognized to be the sensitive good parameter for machine diagnosis. Kurtosis has a value of 3.0 under normal condition and the value generally goes up as the deterioration proceeds. In this paper, simplified calculation method of kurtosis is introduced for the analysis of impact vibration with one sided affiliated impact vibration which occurs towards the progress of time. That phenomenon is often watched in the failure of such as bearings’ outer race. One sided affiliated impact vibration is approximated by one sided triangle towards the progress of time and simplified calculation method is introduced. Varying the shape of one sided triangle, various models are examined and it is proved that new index is a sensitive good index for machine failure diagnosis. Utilizing this method, the behavior of kurtosis is forecasted and analyzed while watching machine condition and correct diagnosis is executed.

• Structural Engineering and Mechanics
• /
• 제35권2호
• /
• pp.127-140
• /
• 2010

This paper focuses on a number of criteria that enable controlling the influence of geometric simplification on the quality of finite element (FE) computations. To perform the mechanical simulation of a component, the corresponding geometric model typically needs to be simplified in accordance with hypotheses adopted regarding the component's mechanical behaviour. The method presented herein serves to compute an a posteriori indicator for the purpose of estimating the significance of each feature removal. This method can be used as part of an adaptive process of geometric simplification. If a shape detail removed during the shape simplification process proves to be influential on mechanical behaviour, the particular detail can then be reinserted into the simplified model, thus making it possible to readapt the initial simulation model. The fields of application for such a method are: static problems involving linear elastic behaviour, and linear thermal problems with stationary conduction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.175-176
• /
• 2010

국내 도로교설계기준에서는 날개벽 길이가 8m 미만인 경우에 대해서 날개벽을 4개 구역으로 나누고 캔틸레버 구조로 간편하게 수계산하여 단면력을 산정하도록 하는 간편법을 제시하고 있다. 이러한 간편법은 수계산에 의존하던 때에 만들어진 규정으로 과도한 안전율을 고려하게 되어 경제성 면에서도 불리한 설계가 이루어지고 있다. 따라서 본 연구에서는 불합리한 교대 날개벽 관련 도로교설계기준을 개선하기 위해서, 날개벽을 2변 고정 판구조로 해석하고 시방서 단면력과 비교검토를 실시하여 현시방서의 문제점을 정량화하고 개선책을 제시하였다.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1384-1396
• /
• 2018

One of the failure modes observed in steel yield energy dissipating devices (SYEDs) excited by a strong earthquake would be the low-cycle fatigue failure. Fatigue cracks of a SYED are prone to initiate at the notch areas where stress concentration is usually occurred, which is demonstrated by the cyclic tests and analyses carried out for this study. Since the fatigue failure of SYEDs dramatically deteriorates their structural capacities, the thorough investigation on their fatigue life is usually required. To do this, sophisticated modeling with considering a time-consuming and complicate fracture mechanism is generally needed. This study makes an effort to investigate the low-cycle fatigue life of SYEDs predicted by a simplified method utilizing damage indices and fatigue prediction equations that are based on the plastic strain amplitudes obtained from typical finite element analyses. This study shows that the low-cycle fatigue failure of SYEDs predicted by the simplified method can be conservatively in good agreement with the test results of SYED specimens prepared for experimental validation.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.3861-3878
• /
• 2021

The steady-state simplified spherical harmonics equations (SP_N equations) are a higher order approximation to the neutron transport equations than the neutron diffusion equation that also have reasonable computational demands. This work extends these results for the analysis of transients by comparing of two formulations of time-dependent SP_N equations considering different treatments for the time derivatives of the field moments. The first is the full system of equations and the second is a diffusive approximation of these equations that neglects the time derivatives of the odd moments. The spatial discretization of these methodologies is made by using a high order finite element method. For the time discretization, a semi-implicit Euler method is used. Numerical results show that the diffusive formulation for the time-dependent simplified spherical harmonics equations does not present a relevant loss of accuracy while being more computationally efficient than the full system.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.947-955
• /
• 2018

In this study, we propose a three-dimensional simplified slope stability analysis using a hybrid-type penalty method (HPM). In this method, a solid element obtained by the HPM is applied to a column that divides the slope into a lattice. Therefore, it can obtain a safety factor in the same way as simplified methods on the slip surface. Furthermore, it can obtain results (displacement and strain) that cannot be obtained by conventional limit equilibrium methods such as the Hovland method. The continuity condition of displacement between adjacent columns and between elements for each depth is considered to incorporate a penalty function and the relative displacement. For a slip surface between the bottom surface and the boundary condition to express the slip of slope, we introduce a penalty function based on the Mohr-Coulomb failure criterion. To compute the state of the slip surface, an r-min method is used in the load incremental method. Using the result of the simple three-dimensional slope stability analysis, we obtain a safety factor that is the same as the conventional method. Furthermore, the movement of the slope was calculated quantitatively and qualitatively because the displacement and strain of each element are obtained.

• 한국해안·해양공학회논문집
• /
• 제33권3호
• /
• pp.93-100
• /
• 2021

고정된 격자시스템에서 임의형상의 불투과 경계를 갖는 물체와 유체와 연성해석이 가능한 IB(Immersed Boundary)법이 개발 된 이후로 다양한 CFD 모델에서 IB법의 활용이 증가하고 있다. 기존의 IB법의 대부분은 구조물의 경계면에서 산정되는 유체력으로부터 수치적으로 경계조건을 만족시키는 directing-forcing법이나 구조물 내부에 가상셀을 위치시켜 보간을 통해 경계조건을 만족시키는 ghost-cell법들로 알고리즘이 복잡하다. 본 연구에서는 고정된 격자시스템에서 가동물체형 구조물 해석이 가능함과 더불어 3차원으로의 확장도 용이한 SIB(Simplified Immersed Boundary)법을 제안하였다. 본 연구에서 제안한 SIB법은 각 상(phase)의 밀도함수가 국소질량의 중심과 함께 이동하는 것으로 가정한 단일유체모델(one-field model for immiscible two-phase fluid)을 기초로 하였다. 또한 이동하는 고체상태의 구조물을 취급하기 위해 고체의 밀도함수를 이용한 체적가중평균법을 적용하고, 수치확산을 방지하기 위해 이류계산에는 CIP법을 적용하였다. 제안된 SIB법의 해석성능을 검토하기 위해 자유수면으로 낙하하는 물체에 대한 수치모의를 수행하였다. 수치해석결과는 자유수면으로 낙하하는 물체를 양호하게 재현하였다.

• Architectural research
• /
• 제2권1호
• /
• pp.41-46
• /
• 2000

The sawtooth skylight is an excellent daylighting concept for the uniform interior illuminance over large working areas. In computer simulation, it is difficult for an architect to get accurate daylight illuminances for the spaces where sawtooth apertures are applied. In this study, daylight prediction algorithms for sawtooth apertures are developed. The flux transfer method is applied for this study to predict daylight illuminances. The simplified equations from this study can be used effectively for preliminary prediction of daylight in sawtooth spaces.