• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.3
• /
• pp.156-162
• /
• 2010

When eccentric or inclined load acts on foundation of the port & harbor structures, partial safety factors of bearing capacity limit state were estimated using reliability analysis. Current Korean technical standards of port and harbor structures recommend to estimate the geotechnical bearing capacity using the simplified Bishop method. In practice, however, simple method of comparing ground reaction resistance with allowable bearing capacity has been mostly used by design engineers. While the simple method gives just one number fixed but somewhat convenient, it could not consider the uncertainty of soil properties depending on site by site. Thus, in this paper, partial safety factors for each design variable were determined so that designers do perform reliability-based level 1 design for bearing capacity limit state. For these, reliability index and their sensitivities were gained throughout the first order reliability method(FORM), and the variability of the random variables was also considered. In order to verify partial safety factors determined here, a comparison with foreign design codes was carried out and were found to be reasonable in practical design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.459-465
• /
• 2015

There exist different kinds of aircrafts, such as conventional airplane, rotorcraft, fighter, and unmanned aerial vehicle. Their shape and feature are dependent upon their own assigned mission. One of the fundamental analyses performed during the aircraft design is the structural analysis. It becomes more complicated and requires severe computations because of the recent complex trends in aircraft structure. In order for efficiency in the structural analysis, a simplified approach, such as equivalent beam or plate model, is preferred. However, it is not clear which analysis will be appropriate to analyze the realistic configuration, such as an aircraft wing, i.e., between an equivalent beam and plate analysis. It is necessary to assess the limitation for both the one-dimensional beam analysis and the two-dimensional plate theory. Thus, in this paper, the static structural analysis results obtained by EDISON solvers were compared with the three-dimensional results obtained from MSC NASTRAN. Before that, EDISON program was verified by comparing the results with those from MSC NASTRAN program and other analytic solutions.

• Management & Information Systems Review
• /
• v.32 no.1
• /
• pp.173-194
• /
• 2013

The purpose of this study drew the core elements of ISO26000 by analyzing the elements suitable to the characteristics of casino companies, and examined the influence of the core elements of ISO26000 on organizational trust following the level of organizational trust of employees. As a result of the factor analysis, among the 7 measurement items of ISO26000, improvement of governance and fair operating practices were simplified into one factor and thus 6 factors were used for empirical analysis. Therefore, multiple regression analysis using least square method was conducted to examine the impacts of the 6 elements. As a result, 5 variables excluding human rights had significant impacts on the organizational trust. Concretely, the 5 core elements of ISO26000 (labor practices, governance and fair operation, consumer issues, environment and community social and economic development) had significant impact on organization trust in order. In addition, the results of quantile regression analysis show the core elements of ISO26000 had different impacts on organizational trust depending on the level of organizational trust of employees.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.119-124
• /
• 2009

Statement of problem: The increasing demand for esthetic restorations has been required developing new materials for tooth colored restoration. Ceromer(Ceramic Optimized Polymer) has some advantages over porcelain, and has gained increasing popularity in restorative dentistry. However, there is little information on the dimensional changes in a clinical restoration in moist conditions. Purpose: This study examined the dimensional changes in Ceromer restorations with a clinical crown shape that were fabricated in a clinical manner. Material and methods: The crowns for the maxillary central incisor were fabricated with two Ceromers($BelleGlass^{(R)}$ and $Targis^{(R)}$) using a similar clinical restoration manufacturing technique. A total of twenty specimens were prepared and immersed in distilled water at room temperature to allow for water absorption. The weight, height and width were measured at 24, 72 and 168 hours. The accumulated ratios of the changes were calculated and evaluated using a paired t-test and an independent independent t-test. Results: The dimensions and weight increased with increasing soaking time. $Targis^{(R)}$ showed significant differences in height and weight between 24 hours and the other times(P<.05). $BelleGlass^{(R)}$ showed significant differences in width and weight between 24 hours and the other times. The two materials showed different changing patterns of the dimensions but there were no statistically significant differences between them. Conclusion: The dimensions and weight of the Ceromer restorations were changed by water absorption. The clinical crown shaped specimen showed more complicated dimensional changes than the simplified specimens.

• Journal of The Korean Association For Science Education
• /
• v.30 no.1
• /
• pp.170-180
• /
• 2010

Among the various fields of Earth Science, especially in Astronomy, we often deal with the change of space-time in an abstract way. Thus, making use of 'Concept Sketches'-simplified sketches that represent the main features, principles, processes and interrelationships of the learning content by using some concise explanations, signs and terms could help the students efficiently learn the phenomena of Astronomy. This study's aim was to check its effects and analyze the results of the lessons that included concept sketches and a discussion about the field of Earth Science in high school. The control group took traditional lessons, while the experimental group did a small-group discussion that used the concept sketches. After the lesson, some students were chosen to answer a questionnaire and go through an in-depth interview. The result of the data shows that the small-group discussion lesson that used the concept sketches helped both the high-ranking and low-ranking students to build concepts and was able to attract students' attention. Moreover, the students produced long-term memories of the content learned through the class discussion, which allowed them to exchange their own thoughts and opinions with other students. Most of all, drawing pictures, a familiar activity, appealed to the students, so they took part in the class eagerly.

• The Research Journal of the Costume Culture
• /
• v.4 no.2
• /
• pp.113-124
• /
• 1996

This research was designed to find out what is a distictive feature of the design elements of Korean women's costume and its influence by analizing the trend of Korean women's constume during the period of 1890 and 1995. The research was analized by a total of 854 random samples of clothing styles collected from materials in the museums and from articles of three leading newspapers and one of the best women's magazines in Korea. The changing trend of Korean women's costume was found out to be as follows: 1. In around 1910s, the trend of Korean women's costume has been changed into two-tier structure of both Korean and Western styles, and the typical and traditional Korean women's street wears such as 'Chang-ot' and 'Tsdechima' have been gradually diminished. 2. From 1920s, length of the Korean skirt, which was unnecessarily long and inconvenient, has been getting shorter for the convenience of walking. In addition, Korean women's underwear has become simplified, and sports wear could be seen for the first time in Korea. 3. During 1960s, the Western clothing styles have been increased rather than Korean styles as the street wear of the Korean women. 4. In 1970s, blue jeans, mini-skirts and casual wears have become a trend or fashion for women in Korea. 5. In 1980s, a fashion of unisex mode has arrived in this country, and from the year of 1987, wearing of panties among the Korean women has been increased rather than skirts wearing for the street wear. 6. During 1990s, various forma of complex styles came into being in such styles as so-called 'orange class style,' 'protruding navel T-shirts' and 'runner wear speedy.' From mid-1990s, Korean women have turned out to prefer the cute and light costumes by placing emphasis on the image of intellectual, professional and functional wears. The changing special feature of the Korean women's clothing designs could be distinctively observed during 1960s as the modernization policies in Korea have been processed during the period. The clothing trend before 1960 was to change and to solve problems of inconvenient and impractical wears, but the trend after 1960 was seen as a change to confirm a trend of the world fashion. From mid-1990s, however, preference of Korean women's self-conceited conception socially and an unquestionable changing pattern of Korean women's life.

• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.141-152
• /
• 2006

In this study computer assisted instruction materials for the ‘Solution' chapter in high school chemistry II textbook were developed based on a view of particle and analyze the effect of the materials on 10th and 11th high school students. The contents of developed materials are dissolution, vapor pressure, the change of boiling point and freezing point, osmosis, and so on which are the major contents of Solution chapter in high school chemistry II textbook. Materials were developed with using animation and simulation for students understanding of the phenomena with a particle view point. Many phenomena in a solution were not simplified by colligative property of solution, but tried to explain by the concept of attraction between solute and solvent molecules. This computer assisted learning materials were developed using Flash 5.0 and Flash 6.0 Action Script. Educational effects of the materials on 10th and 11th grade students represented statistically meaningful increase of concept understanding. Especially the materials were effective to the transition stage or formal stage students in 10th grade and formal stage or the natural science major students in 11th grade.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.99-108
• /
• 2006

To describe the behavior of suspended-sediment particles in turbulent open-channel flows, the advection-diffusion equation or its simplified form has been used. Though this equation was derived upon several assumptions, only a few studies tried to evaluate the limit of the assumptions. The reason is that it is very difficult to measure turbulence in open-channel flows and to discriminate the velocities of water and sediment particles. The present study aims to measure the velocity profiles of water and sediment particles in open-channel flows by using PTV (Particle Tracking Velocimetry), a kind of PIV (Particle Image Velocimetry). The measured results showed that sediment particles moved slower than water tracers did in the outer region. In the present study, the amount of velocity-lag reached about $5\%$ of the mom flow velocity and the position of the maximum velocity-lag was $g/h\approx0.05\;(g^{+}=30\~50)$ The main cause of the velocity-lag of sediment particles seems that the sediment particles have larger density than water has. On the other hand, in the viscous sublayer, sediment particle has a larger velocity than water tracers. The reason of the inversion of velocity-lag may be due to the no-sleep condition of water at the solid boundaries.

• Journal of Korea Water Resources Association
• /
• v.43 no.3
• /
• pp.245-256
• /
• 2010

We study the basic theory and applicability of the WQUAL block in the FFC2Q model and the characteristics of non-point pollutant loads during the early stage of runoff. Study is also performed on selection of the values of the related parameters and their effect on the simulation results. FFC2Q simulation results are compared for verification with the measured data for three rainfall events in the Gunja Subbasin and found to be similar to the measured data in peak-flows, total runoff volumes, total loads, peak concentrations and times of peak concentration. This model thus shows results very close to those applying the SWMM and MOUSE models, even though it uses simplified input data. Related to rainfall distribution, under the condition of Huff 1st quartile distribution the pollutant loads occurred earlier than under other conditions, and in the early stage of rainfall the BOD and COD loads increased faster than the SS loads. The NPS loads were concentrated in the early stage of rainfall and finally reached total loads, so the rainfall after that could not contribute so much to the NPS loads.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.37-42
• /
• 2002

Artificial neural networks are efficient computing techniques that are widely used to solve complex problems in many fields. In this paper a liquefaction potential was estimated by using a back propagation neural network model applicated to cyclic triaxial test data, soil parameters and site investigation data. Training and testing of the network were based on a database of 43 cyclic triaxial test data from 00 sites. The neural networks are trained by modifying the weights of the neurons in response to the errors between the actual output values and the target output value. Training was done iteratively until the average sum squared errors over all the training patterns were minimized. This generally occurred after about 15,000 cycles of training. The accuracy from 72% to 98% was shown for the model equipped with two hidden layers and ten input variables. Important effective input variables have been identified as the NOC,$D_10$ and (N$_1$)$_60$. The study showed that the neural network model predicted a CSR(Cyclic shear stress Ratio) of silty-sand reasonably well. Analyzed results indicate that the neural-network model is more reliable than simplified method using N value of SPT.