• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.443-453
• /
• 2013

The hybrid test is one of the most advanced test methods to predict the structural dynamic behavior with the interaction between a physical substructure and a numerical modeling in the hybrid control system. The purpose of this study is to perform the multi-directional dynamic test of a steel frame structure with the real-time hybrid system and to evaluate the validation of the results. In this study, FEAPH, nonlinear finite element analysis program for hybrid only, was developed and the hybrid control system was optimized. The inefficient computational time was improved with a fixed number iteration method and parallel computational techniques used in FEAPH. Furthermore, the previously used data communication method and the interface between a substructure and an analysis program were simplified in the control system. As the results, the total processing time in real-time hybrid test was shortened up to 10 times of actual measured seismic period. In order to verify the accuracy and validation of the hybrid system, the linear and nonlinear dynamic tests with a steel framed structure were carried out so that the trend of displacement responses was almost in accord with the numerical results. However, the maximum displacement responses had somewhat differences due to the analysis errors in material nonlinearities and the occurrence of permanent displacements. Therefore, if the proper material model and numerical algorithms are developed, the real-time hybrid system could be used to evaluate the structural dynamic behavior and would be an effective testing method as a substitute for a shaking table test.

• Steel and Composite Structures
• /
• v.1 no.4
• /
• pp.459-480
• /
• 2001

The damage suffered by steel structures during the Northridge (1994) and Kobe (1995) earthquakes indicates that the fully restrained (FR) connections in steel frames did not behave as expected. Consequently, researchers began studying other possibilities, including making the connections more flexible, to reduce the risk of damage from seismic loading. Recent experimental and analytical investigations pointed out that the seismic response of steel frames with partially restrained (PR) connections might be superior to that of similar frames with FR connections since the energy dissipation at PR connections could be significant. This beneficial effect has not yet been fully quantified analytically. Thus, the dissipation of energy at PR connections needs to be considered in analytical evaluations, in addition to the dissipation of energy due to viscous damping and at plastic hinges (if they form). An algorithm is developed and verified by the authors to estimate the nonlinear time-domain dynamic response of steel frames with PR connections. The verified algorithm is then used to quantify the major sources of energy dissipation and their effect on the overall structural response in terms of the maximum base shear and the maximum top displacement. The results indicate that the dissipation of energy at PR connections is comparable to that dissipated by viscous damping and at plastic hinges. In general, the maximum total base shear significantly increases with an increase in the connection stiffness. On the other hand, the maximum top lateral displacement $U_{max}$ does not always increase as the connection stiffness decreases. Energy dissipation is considerably influenced by the stiffness of a connection, defined in terms of the T ratio, i.e., the ratio of the moment the connection would have to carry according to beam line theory (Disque 1964) and the fixed end moment of the girder. A connection with a T ratio of at least 0.9 is considered to be fully restrained. The energy dissipation behavior may be quite different for a frame with FR connections with a T ratio of 1.0 compared to when the T ratio is 0.9. Thus, for nonlinear seismic analysis, a T ratio of at least 0.9 should not be considered to be an FR connection. The study quantitatively confirms the general observations made in experimental results for frames with PR connections. Proper consideration of the PR connection stiffness and other dynamic properties are essential to predict dynamic behavior, no matter how difficult the analysis procedure becomes. Any simplified approach may need to be calibrated using this type of detailed analytical study.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.335-353
• /
• 2017

This paper presents the application technique on thrust jacking pressuring of shield TBM in the sharp curved tunnel alignment by model tests. Recently, the application of shield TBM method as mechanized tunnelling is increasing to prevent the vibration and noise problems, which can be occurred in the NATM in the urban area in Korea. However, it is necessary to plan the sharp curved tunnel alignment in order to avoid the building foundation and underground structures, to develop the shield TBM operation technique in the shape curved tunnel alignment. Therefore, the main operation parameters of shield TBM in the curved tunnel alignment are reviewed and analyzed based on the case study and analytical study. The results show that the operation of shield jacking force system is the most important technique in the shape curved tunnel alignment. The simplified scaled model tests are also carried out in order to examine the ground-shield TBM head behaviour. The earth pressures acting on the head of shield TBM are investigated according to two different shield jacking force systems (uniform and un-uniform pressure) and several articulation angles. The results obtained from the model tests are analysed. These results will be very useful to understand the shield TBM head interaction behaviour due to the shield jacking operation technique in the shape curved tunnel alignment, and to develop the operation technique.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.143-159
• /
• 2017

A probabilistic fragility assessment procedure is developed in this paper to predict risks of damage arising from seismic loading to the two-cell RC box tunnel. Especially, the paper focuses on establishing a simplified methodology to derive fragility curves which are an indispensable ingredient of seismic fragility assessment. In consideration of soil-structure interaction (SSI) effect, the ground response acceleration method for buried structure (GRAMBS) is used in the proposed approach to estimate the dynamic response behavior of the structures. In addition, the damage states of tunnels are identified by conducting the pushover analyses and Latin Hypercube sampling (LHS) technique is employed to consider the uncertainties associated with design variables. To illustrate the concepts described, a numerical analysis is conducted and fragility curves are developed for a large set of artificially generated ground motions satisfying a design spectrum. The seismic fragility curves are represented by two-parameter lognormal distribution function and its two parameters, namely the median and log-standard deviation, are estimated using the maximum likelihood estimates (MLE) method.

• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.109-113
• /
• 2002

In recent years, the radiotherapy equipment has become much more sophisticated, and with the complication comes an increased set of quality assurance (QA) responsibilities. Today's computer controlled linear accelerator requiring QA of not only the radiation integrity, but also the mechanical accuracy of the linear accelerator. The existing QA sheets are adequate for acceptance testing and commissioning but those sheets are somewhat descriptive form for routine QA. establishing the QA sheets for a facility are more efficient if the sheets could estimate the long-term stability for the result of QA. We are going to develope new prototype of mechanical QA sheet to visualize and to verify long-term stability of mechanical QA for clinical linear accelerator. The items included in mechanical QA sheet were 1) gantry rotation, 2) collimator rotation, 3) couch rotation, 4) optical distance indicator (ODI), and 5) laser alignment. We compared new prototype sheet with conventional sheet for several hospitals in Korea for those items. The QA acceptance criteria in this study mainly followed published recommendations. The contents of test for mechanical QA are the following. Confirm that the digital and/or mechanical gantry angle readouts are correct. Verify that digital and/or mechanical readouts of collimator angle agree with the true angle, as determined with the protractor. Measure the light field using a graph paper and compare with the digital readouts. Confirm digital readout accuracy. Verify that the sagittal laser, the left and right lasers, and the ceiling laser intersect at the isocenter. In the design of new QA sheet, we emphasized the representation of the long-term stability of mechanical QA by using Excel program. By using the new prototype QA sheet, we simplified and visualized the mechanical QA process, and could estimate the long-term stability of mechanical error of linear accelerator.

• Progress in Medical Physics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

A practical calculation algorithm which calculates the relative output factor(ROF) for irregular shaped electron field has been developed and evaluated the accuracy of the algorithm. The algorithm adapted two-source model, which assumes that the electron dose can be express as sum of the primary source component and the scattered component from the shielding block. Original two-source model has been modified in order to make the algorithm simpler and to reduce the number of parameters needed in the calculation, while the calculation error remains within clinical tolerance range. The primary source is assumed to have Gaussian distribution, while the scattered component follows the inverse square law. Depth and angular dependency of the primary and the scattered are ignored ROF can be calculated with three parameters such as, the effective source distance, the variance of primary source, and the scattering power of the block. The coefficients are obtained from the square shaped-block measurements and the algorithm is confirmed from the rectangular or irregular shaped-fields used in the clinic. The results showed less than 1.0 ％ difference between the calculation and measurements for most cases. None of cases which have bigger than 2.1 ％ have been found. By improving the algorithm for the aperture region which shows the largest error, the algorithm could be practically used in the clinic, since one can acquire the 1011 parameter's with minimum measurements(5∼6 measurements per cones) and generates accurate results within the clinically acceptable range.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.51-58
• /
• 2012

The objective of this paper is to predict the buckling pressure of a composite cylindrical shell using buckling formulas (ASME 2007, NASA SP 8007) and finite element analysis. The model in this study uses a stacking angle of [0/90]12t and USN 125 composite material. All specimens were made using a prepreg method. First, finite element analysis was conducted, and the results were verified through comparison with the hydrostatic pressure buckling experiment results. Second, the values obtained from the buckling formula and the buckling pressure values obtained from the finite element analysis were compared as the stacking angle was changed in $5^{\circ}$ increments from $20^{\circ}$ to $90^{\circ}$. The linear and nonlinear results of the finite element analysis were consistent with the results of the experiment, with a safety factor of 0.85-1. Based on the above result, the ASME 2007 formula, a simplified version of the NASA SP-8007 formula, is regarded as a buckling formula that provides a reliable safety factor.

• Korean Journal of Hospice Care
• /
• v.5 no.1
• /
• pp.42-49
• /
• 2005

To determine which are the culturally specific factors of Korean bereavement, this chapter focuses on the view of death and the traditional mourning process which reflect Korean values and norms. The formation of the Korean view and understanding of death has been strongly influenced by three of its major traditional religions: Shamanism, Buddhism, and Confucianism (Park:1994: Hao:1999) and Christianity more recently. Each religion has a different view of death and the appropriate expression of mourning. Korea accommodates funeral customs and rules strictly as a cultural system and has retained these traditions over a long period; hence, some of the traditional funeral rituals still remain in modern Korean life, although some of the rites have been simplified. We have looked at the various ways in which grief and mourning is displayed and shared in a collective manner over a long period of time. This fits in well within the other Eastern cultures that are collectively organized, and contrary to the Eurocentric models do not hastily seek to detach the living from the dead and recognize that grief is a long process, and different individuals may take different amounts of time to recover from the grief. The view of death and bereavement in Korea has sprung from the roots of three Korean religions, together with the recent addition of Christianity, although they mainly result from the three earlier religions. The beliefs of these religions are still closely linked together in the rituals of Korean bereavement on both conscious and unconscious levels. The influence of these religions is evident in practice through the bereaved family's mourning reactions, funeral rites and customs and its views about death. Korea used to have a period of mourning for three years, following traditional mourning rites; then the chief mourner and the bereaved families could return to their normal life. In spite of this long mourning process for the bereaved family, once the funeral ceremony is finished, people expect the bereaved family not to express their grief in public; even the bereaved family does not like to talk about death. The process for bereaved people is related to mourning processes in terms of detachment from the deceased in order to start a new life. Relatives and the community recommend the performance of the kut ceremony for relieving the grief of the bereaved. When one family member dies in an unlucky way, the bereaved family may have some fear or other psychological reactions of grief such as pain, depression, insomnia and nightmares, hallucinations or other physical reactions. Unlucky deaths give the bereaved a very painful time and these types of reactions are often more serious than reactions to natural death. But through the kut ceremony, the bereaved family can start to make a new relationship with the deceased. The taboo of this type of death and death generally remains a crucial aspect of the isolation that bereaved people might face and the collective nature of mourning(even where it is still present) is unable to address this aspect of the privatization of grief.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.33-42
• /
• 2005

In this paper, we propose an efficient segmentation algerian using morphological grayscale reconstruction for region-based coding. Each segmentation stage consists of simplification, marker extraction and decision. The simplification removes unnecessary components to make an easier segmentation. The marker extraction finds the flat zones which are the seed points from the simplified image. The decision is to locate the contours of regions detected by the marker extraction. For the simplification, we use a new connected operator based on the size and contrast. In the marker extraction stage, the regions reconstructed to original values we excluded from the candidate marker. For the other regions, the regions which are larger than structuring elements or have higher contrast than a threshold value are selected as markers. For the initial segmentation, the conventional hierarchical watershed algorithm and the extracted markers are used. Finally in the region merging stage, we propose an efficient region merging algorithm which preserves a high quality in terms of the number of regions. At the same time, the pairs which have higher contrast than a threshold are excluded from the region merging stage. Experimental results show that the proposed marker extraction method produces a small number of markers, while maintaining high quality and that the proposed region merging algorithm achieves a good performance in terms of the image quality and the number of regions.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.277-293
• /
• 2008

We conducted a consensual, expansive, and successive study to compare cultural differences and similarities between Korean, Chinese and Japanese's Seasonal Festivals and Foods documentarily. It showed interesting results that the three countries had celebrated with similar meanings, and shared similar events and special foods. Seasonal Festivals happen throughout the year sequentially: the New Year Day, January $15^{th}$(first full moon festival), March $3^{rd}$(double three day), May $5^{th}$(double five day), July $7^{th}$(double seven day) and finally the Year Farewell Festival. While, the festival of a royal birthday of Buddha happens on April $8^{th}$ in both countries: Korea and Japan. There is also one of the big festivals called the harvest moon festival on August $15^{th}$, and this event celebrates with special foods both in Korea and China. On December $23^{th}$, it is a special day for both Chinese and Japanese, but they celebrate the day with different meanings to it. Three countries have a special seasonal event celebrated each other. Koreans have a special event called Sambok to overcome summer with special food during a middle of June to the beginning of July. Chinese have a special event for overcoming winter with soup on December $8^{th}$. Japanese have a special event with rice cake to safety on January $11^{th}$. On these seasonal festivals, it is different to note that two different kinds of calendars are used. The lunar calendar is used by Koreans and Chinese whereas the solar calendar is used by Japanese. Because of the similarity in Buddhism, and agricultural industry, and especially sharing Chinese Characters in words, these three countries have in common in many ways to celebrate Seasonal Festival, and it is very unique custom in the world. Nowadays; however, these traditional events and special foods are changing in more simplified version and almost disappearing in all three countries. Therefore, we suggest that the Seasonal Festivals and Foods should be more emphasized in flourishing and exchanging between Korea, China and Japan.