• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.408-410
• /
• 2006

To chase maximum power point at every moment under a conventional MPPT control method, a voltage and current coming out from PV-cell are needed to be feedbacked. So, the structure of control circuit becomes so complex and the MPPT control is in risk of control failure. In the newly developed control method, the current flowing into SPE cell is the only one considerable factor. So, the structure of control circuit becomes simple and the manufacturing cost of the control device decreases. Especially, in case of a huge system of PV-SPE system, because the voltage coming out from PV-cell is not needed to be feed backed, this system can be operated much more safely. In this paper, the PV-SPE system was actually manufactured based on the simulation model of PSCAD/EMTDC program and the results tested were shown. Authors are sure that it is the most useful method to maximize power from PV to SPE with only a feedback of SPE input current.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5935-5939
• /
• 2013

Our study is to determine the presence of endometrial intraepithelial neoplasia (EIN) in endometrial biopsy specimens classified by the 1994 World Health Organization (WHO) criteria for endometrial hyperplasia. Endometrial biopsy specimens that were stained with hematoxylin and eosin (HE) were examined and categorized by the WHO 1994 criteria and for the presence of EIN as defined by the International Endometrial Collaborative Group. ${\beta}$-catenin expression was examined by immunohistochemistry. A total of 474 cases of HE stained endometrial biopsy tissues were reviewed. There were 379 cases of simple endometrial hyperplasia, 16 with simple atypical endometrial hyperplasia, 48 with complex endometrial hyperplasia, and 31 with complex atypical endometrial hyperplasia. Among the 474 endometrial hyperplasia cases, there were 46 (9.7%) that were classified as EIN. Of these 46 cases, 11(2.9%) were classified as simple endometrial hyperplasia, 1 (6.3%) as simple atypical endometrial hyperplasia, 6 (12.5%) as complex endometrial hyperplasia, and 28 (90.3%) as complex atypical endometrial hyperplasia. EIN was associated with a higher rate of ${\beta}$-catenin positivity than endometrium classified as benign hyperplasia (72% vs. 22.5%, respectively, P<0.001), but a lower rate than endometrial adenocarcinoma (72% vs. 96.2%, respectively, P<0.001). In benign endometrial hyperplasia, high ${\beta}$-catenin expression was noted in the cell membranes, whereas in EIN and endometrial adenocarcinoma high expression was noted in the cytoplasm. In conclusion, EIN is more accurate than the WHO classification for the diagnosis of precancerous lesions of the endometrium.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.173-178
• /
• 1996

A three-dimensional thermo-hydraulic computer code is developed for simulation of incompressible flows in complex geometries. The computer code employs a body-fitted, nonorthogonal grid system in order to efficiently handle the complex geometries encountered in many engineering applications. The finite volume method is used to discretize the governing equations and the convection term is treated by higher-order bounded schemes. The cell-centered, nonstaggered grid arrangement is adopted and the resulting checkerboard pressure oscillation is avoided by use of momentum interpolation practice. The computer code employs the SIMPLE algorithm for pressure and velocity coupling and the k-$\varepsilon$ turbulence for turbulent calculation. The computer code has been tested through application to a variety of test problems and some results are presented in this paper

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.77-83
• /
• 2003

The cell modeling homogenization method to derive the constitutive equation considering the microstructures of the fiber reinforced composites has been previously developed for composites with simple microstructures such as 2D plane composites and 3D rectangular shaped composites. Here, the method has been further extended for 3D circular braided com-posites, utilizing B-spline curves to properly describe the more complex geometry of 3D braided composites. For verification purposes, the method has been applied for orthotropic elastic properties of the 3D circular braided glass fiber reinforced com-posite, in particular for the tensile property. Prepregs of the specimen have been fabricated using the 3D braiding machine through RTM (resin transfer molding) with epoxy as a matrix. Experimentally measured uniaxial tensile properties agreed well with predicted values obtained for two volume fractions.

• The Korean Journal of Malacology
• /
• v.31 no.1
• /
• pp.27-34
• /
• 2015

The anatomy and ultrastructure of the digestive diverticulum of Tegillarca granosa were described using light and electron microscopy. The digestive diverticulum was situated on the gonad and connected to stomach by a primary duct. Digestive diverticulum is composed of numerous digestive tubules. The epithelial layer of digestive tubule, which is simple, is composed of basophilic cells and digestive cells. Basophilic cells are columnar in shape, and the electron density is higher than that of the digestive cell. The cytoplasm has a well-developed endoplasmic reticulum, tubular mitochondria, Golgi complex and of membrane-bounded granules of high electron density. Digestive cells were classified into three types. According to cell shape, electron density and cell organelles. However, three types of epithelia was same that striated border was observed in free surface and lysosome was observed in cytoplasm. The results of this study suggest that basophilic cells and digestive cells in the digestive tubule are specialized in the extracellular and intracellular digestions, respectively.

• Journal of Veterinary Clinics
• /
• v.33 no.1
• /
• pp.74-79
• /
• 2016

A 7-year-old female Pointer dog with multiple masses in the axilla, mammary gland, and bladder was submitted to the Pathology Department of the College of Veterinary Medicine in the Jeju National University. Grossly, mass between right axilla and 1st mammary gland, $15{\times}10cm$ in size, was well delineated and firm, slightly soft center, oval shape. And masses in right 1st, 3rd and 5th mammary gland were well delineated and sulphur yellow in color on the cut-surface. Numerous round to oval shaped masses, 0.3 to 2 cm in diameter were existed in the lung. Urinary bladder mucosa had rough and thick and round to oval papillary masses, 0.1 to 2 cm in diameter, on surface. Microscopically, masses in right axilla, 1st mammary gland, lung and axillary lymph node were composed of poorly differentiated tubules originated from apocrine gland. Lining neoplastic epithelium showed high mitotic figures, typical apical secretory blebs, and PAS-positive diastase-resistant cytoplasmic granules. Masses in 3rd and 5th mammary gland were confirmed as mammary complex adenoma and simple adenoma respectively. The masses in the urinary bladder were covered with stratified transitional epithelium with marked cellular atypia and high mitotic figures. Some neoplastic cells showed focal invasion into substantia propria of bladder. Immunohistochemaically, neoplastic transitional epithelium demonstrated positive reactions for cytokeratin 7, AE1/AE3, and MNF116. Based on the gross, histopathologic and immunohistochemical characteristics, this dog was diagnosed as apocrine carcinoma, mammary gland tumor including simple adenoma and complex adenoma and bladder transitional cell carcinoma. And distant metastases of apocrine carcinoma in right axilla were observed in axillary lymph node and lungs. This is the first report for concurrent occurrence of apocrine carcinoma, mammary gland tumor, and transitional cell carcinoma in a same dog.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.19-26
• /
• 2021

The lattice structure is attracting attention from industry because of its excellent strength and stiffness, ultra-lightweight, and energy absorption capability. Despite these advantages, widespread commercialization is limited by the difficult manufacturing processes for complex shapes. Additive manufacturing is attracting attention as an optimal technology for manufacturing lattice structures as a technology capable of fabricating complex geometric shapes. In this study, a unit cell was formed using a three-dimensional coordinate method. The relative density relational equation according to the boundary box size and strut radius of the unit cell was derived. Simple cubic (SC), body-centered cubic (BCC), and face-centered cubic (FCC) with a controlled relative density were designed using modeling software. The accuracy of the equations for calculating the relative density proposed in this study secured 98.3%, 98.6%, and 96.2% reliability in SC, BCC, and FCC, respectively. A simulation of the lattice structure revealed an increase in compressive yield load with increasing relative density under the same cell arrangement condition. The compressive yield load decreased in the order of SC, BCC, and FCC under the same arrangement conditions. Finally, structural optimization for the compressive load of a 20 mm × 20 mm × 20 mm structure was possible by configuring the SC unit cells in a 3 × 3 × 3 array.

• The Korean Journal of Malacology
• /
• v.31 no.4
• /
• pp.291-298
• /
• 2015

This study was conducted to provide the microanatomical information of the heart-kidney complex of Tegillarca granosa. The heart-kidney complex was located in the pericardial cavity between the dosal visceral mass and posterior adductor muscle. The heart composed of two atrium and one ventricle. The kidney composed of a pair of left and right. The atrium and ventricle of the heart were composed of the epicardium, myocardium and endocardium. The epicardium of simple epithelial layer composed of cuboidal epithelial cells that had a strong basophilic nucleus located in the center. The myocardium composed of muscle fiber bundles. The myocardium in ventricle was denser than in the atrium. The endocardium of simple epithelial layer composed of squamous epithelial cell that had a strong basophilic nucleus was located in the center. The endocardium thickness of the atrium was $6.04({\pm}2.26){\mu}m$, endocardium thickness of the atrium was $7.36({\pm}3.21){\mu}m$, and appeared to be thicker in the ventricle. The kidney composed of numerous renal tubules. The renal tubule of simple epithelial layer composed of columnar epithelial cell with nucleus located in the basal zone and a number of cytoplasmic granules. The developed striated border was the inner epidermis.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2007

In this study, we fill a person's shoes human knowledge use a computer fast and simple repetition in architecture design. this study are launched from a assumption that a optimized arrangement spaces are able to measure and gauge. but automatic space arrangement program is first step, we have a value that propose a differential cell space and valuation space and process of optimized space arrangement. the merits of this design process are as follows; 1. this program has a advantage high the building-to-land ratio land and business area in space design. 2.this program can design a economy building and calculate rent benefit and calculate cost of construction. 3. this program can adapt for digital GIS. this program can down cost in labor productivity. 5. a layman can design high level. the weak point of this design process are as follows; 1. the design product is simple box shape. 2. this program has a weak in large area and complicated land shape 3. complex use space design are difficult in this program.

• Journal of Applied Biological Chemistry
• /
• v.59 no.3
• /
• pp.215-220
• /
• 2016

Abstract Secondary cell wall is the most abundant biomass produced by plants. Plant secondary cell wall is composed of a complex mixture of cellulose, hemicellulose, and lignin. Lignin, a phenolic polymer that hinders the degradation of cell wall polysaccharides to simple sugars destined for fermentation to bio-ethanol. Cell wall biosynthesis pathway-specific biomass engineering offers an attractive 'genetic pretreatment' strategy to improve bioenergy feedstock. Recently, we found a transcription factor, MYB7, which is a transcriptional switch that may turns off the genes necessary for lignin biosynthesis. To gain insights into MYB7 mediated transcriptional regulation, we first established a dominant suppression system in Arabidopsis by expressing MYB7-SRDX. Then we used a transient transcriptional activation assay to confirm that MYB7 suppress the transcription of the lignin biosynthetic gene. Taken together, we conclude that MYB7 function as a repressor of the genes involved in the lignin biosynthesis.