• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1291-1299
• /
• 1995

In confined coaxial jets, the flow-mixing characteristics depend on the initial conditions at the nozzle outlet such as velocity ratio and nozzle radius ratio. In this study, nozzle ratio(inner/outer) was 0.3. Longitudinal axial velocity, turbulent intensity and Reynolds shear stress were measured by CTA. Measurements were made from the duct inlet to the region where similarity solution could exist. This study investigated flow charicteristics according to the variation of similitude parameter which was derived from the theory of Craya-Cutet. The range of similarity region depends on the variation of the similitude patameter. The form factor obtained from the axial velocity profile in the similarity region was constant. The higher the similitude parameter, the wider the spread rate of the jets. Due to this fact, the similarity conditions developed more quickly and the region where the similarity holds became narrow. Present experimental data confirmed the validity of Craya-Curtet theory.

• Journal of Biosystems Engineering
• /
• 제14권2호
• /
• pp.67-79
• /
• 1989

This study was conducted to investigate the applicability of true model theory for pull prediction in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the pull prediction. The following conclusions were derived from the study; 1) The pull of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. The pull curves of models and prototype were respectively very similar in the shape. From this basic knowledge, it was enabled to apply the similitude theory to the performance prediction of the true model. 2) A conditional equation which can be used for the prediction of pull of prototype by model test was derived as follows. $n_f=n_1^{-b}$ where $n_f$ : force scale = $w/w_m$ $n_1$ : length scale = ${\ell}/{\ell}_m$ b : exponent on the length dimension of the soil property ${\alpha}$ The range of the numerical value of b, which was determined by the least square method, was found to be -2.0~-2.6. 3) Considering a relatively wide variation of b values in the pull prediction, b is considered to be a function of many variales. Thus it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel-soil system concerning the pull prediction, and these soil properties may have the different effects on the pull of model and protytype wheels, to give the different dimension on the soil parameters.

• Journal of Biosystems Engineering
• /
• 제14권3호
• /
• pp.158-167
• /
• 1989

This study was conducted to investigate the applicability of true model theory in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the sinkage prediction. The following conclusions were derived from the study; 1) The sinkage of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. 2) A conditional equation which can be used for the prediction of sinkage of prototype by model test was derived as $n_f=n{_\ell}{^{-b}}$. The range of the numerical value of b, which is the exponent on the length dimension of the soil property ${\alpha}$, was found to be -1.48~-2.54. 3) Considering a relatively wide variation of b values, it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel soil system concerning the sinkage prediction.

• 한국수산과학회지
• /
• 제41권3호
• /
• pp.215-220
• /
• 2008

This study examined the stability of cross- and box-type artificial reefs used to construct seaweed beds. Theoretical and experimental studies have clarified the Froude similitude. However, basic data needed to develop a more stable design for artificial reefs must be collected from long-term studies and analyses of sliding caused by waves. Hydraulic experiments are important for solving problems in the design and construction of artificial reefs. This study examined some design parameters for artificial reefs under wave and currents. The results showed the stability of cross- and box-type artificial reefs for constructing seaweed beds using a dimensionless parameter (the surf similarity parameter), water particle velocity, and so on. The hydraulics experiment indicated that the stability of artificial reefs differed according to their method of installation. This implies that artificial reefs should be installed after considering various environmental factors, such as wave breaking, reflection, and sediments.

• Nuclear Engineering and Technology
• /
• 제12권4호
• /
• pp.286-292
• /
• 1980

원자노내부구조물의 유체흐름에 의한 진동간제실험을 위한 모델의 상의조건을 구명하였다. 레이놀드교의 영향에 관해 깊이 있는 해명을 하였다. 핵연료의 모델시험율에서는 무차원진동교 (fD/U)와 점성파라미터 ( $m_{0}$$\delta$$_{0}$$\rho$ $D^2$)가 중요한 파라미터임을 보였다.보였다.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.120-124
• /
• 2007

The purpose of this study was to investigate the stability of the arched and fan types of artificial reefs, which provide habitats for shellfish and seaweed. According to the Froude similitude, parameters affecting the stability of the artificial reefs were analytically, experimentally studied. First, the design parameters of the artificial reefs in wave and current fields were presented. Then, using dimensionless parameters, such as the surf similarity parameter and water particle speed, the stability of the arched and fan types of artificial reefs was investigated. From the hydraulic experiments, it is shown that the stability heavily depends on the way the artificial reefs are installed. Therefore, the installation of the artificial reefs on the surf zone should be carefully executed.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.114-120
• /
• 2008

This study is to compare and analyze the material flow, deformation characteristics, and forming load of flange by means of similitude experimental method of model material using plasticine. In order to find optimal forming conditions, prototype experiments were designed to investigate forming characteristics of general-purpose flange under various working conditions. As a result of prototype experiments, billet thickness and gap-height ratio was found to be the most influential experimental parameter in flange forming. Forming loads from prototype experiments were compared to the results of finite element analysis after conducting estimation of forming loads of real material. Results of prototype experiments based on model material techniques are expected to be used as a basic data of die design f3r the development of products and process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.108-117
• /
• 2011

본 연구에서는 해양수산자원 및 레크리에이션 증진을 위한 프로그램의 일부로 개발된 철도차량 인공어초의 수리학적 안정성 평가를 위해 수리모형실험을 수행하였다. Froude 상사법칙을 적용한 고정상 및 이동상 수리모형실험에서는 설계외력(파랑, 흐름 등)에 상당하는 조건에 따라 이론적/실험적 검토를 수행하였다. 실험결과로서 파랑-흐름공존장에서 어초의 안정성에 영향을 미치는 무차원 영향인자(설계파라메타)로서 쇄파상사지수, 수립자속도, 세굴/퇴적 등이 있으며, 고정상 실험에서 어초의 활동을 일으키는 한계조건은 쇄파상사지수에 따라서 무차원 최대수립자속도가 약 0.32 이상일 때 나타났다. 또한 이동상 실험에서 침하량(현장치)은 6~30cm이었다. 실험결과를 바탕으로 어초의 활동에 작용하는 외력의 방향과 저질 특성이 어초 시설적지를 선정할 때 반드시 고려되어야 함을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.725-734
• /
• 2010

본 연구에서는 2종류의 피라미드형 패조류용 인공어초의 안정성 평가를 위해 Froude 상사법칙을 적용한 고정상 및 이동상 수리모형실험을 수행하였으며, 현장 설계외력(파랑, 흐름 등) 조건에 따라 이론적/실험적 검토를 하였다. 실험 결과는 파랑-흐름 공존장에서 어초의 안정성에 영향을 미치는 무차원 영향인자(설계파라메타)인 쇄파상사지수, 수립자속도, 파압 등을 사용하여 상호관련성을 검토하였다. 그 실험결과, 어초의 활동을 일으키는 한계조건은 고정상 실험에서는 쇄파상사지수에 따라서 무차원 최대수립자속도가 약 0.4 이상일 때, 이동상 실험에서는 무차원 파압에 따라서 상대수심이 약 0.11 이하일 때 나타났다. 또한 상대수심에 따른 수평 및 연직 파압은 상대수심이 증감함에 따라서 선형적으로 감소하는 경향을 나타내었다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.210-220
• /
• 1997

This study is to systematically analyze the effect of various kinds of design parameters on heat transfer and pressure drop characteristics of heat exchanger with a slit fin. TAGUCHI method, known to us as a very reasonable tool in the parametric study, is employed in the present work. Experimental factors have been limited to seven cases, considering the production of sample and the cost. The 18 kinds of large scale models are made by compounding level on each factor and the heat transfer and flow characteristics on each model has been analyzed. The present results allow us to be able to quantitatively estimate the various parameters affecting the heat exchanger performance, and main factors for an optimum design of a heat exchanger have been selected. The optimum design value on each parameter was presented and the reproducibility on the results was guaranteed.