• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1328-1333
• /
• 2004

The Flame length of $CH_4$ with the Oxidizer of air and $O_2$ has been measured respectively for the nozzle diameter of 1.6mm, 2.7mm, 4.4mm and 7.7mm. In all $CH_4$ flame on oxidizer of air and $O_2$. the flame length was independent of the initial jet diameter, dependent only on the flowrate in laminar flame regime, and in turbulent flame dependent on the initial jet diameter. Using correlation equation of Delichatsios, the flame length has been expected exactly for $CH_4/air$ flame, but has been underestimated for $CH_4/O_2$ flame. This paper has proposed correlation equation of $CH_4/O_2$ flame.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.392-395
• /
• 2003

This paper describes a new iris segmentation and recognition method, which is robust to noises. Combining statistical classification and elastic boundary fitting, the iris is first segmented. Then, the localized iris image is smoothed by a convolution with a Gaussian function, down-sampled by a factor of filtered with a Laplacian operator, and quantized using the Lloyd-Max method. Since the quantized output is sensitive to a small shift of the full-resolution iris image, the outputs of the Laplacian operator are computed for all space shifts. The quantized output with maximum entropy is selected as the final feature representation. An appropriate formulation of similarity measure is defined for the classification of the quantized output. Experimentally we showed that the proposed method produces superb performance in iris segmentation and recognition.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.31-45
• /
• 2013

PURPOSES : Determination of particle packing model variables that can be used for formulation of new DEM based particle packing model by examining existing particle packing models METHODS : Existing particle packing models are thoroughly examined by analytical reformulation and sensitivity analysis in order to set up DEM based new particle packing model and to determine its variables. All model equations considered in this examination are represented with consistent expressions and are compared to each others to find mathematical and conceptual similarity in expressions. RESULTS : From the examination of existing models, it is observed that the models are very similar in their shapes although the derivation of the models may be different. As well, it is observed that variables used in some existing models are comprehensive enough to estimate particle packing but not applicable to DEM simulation. CONCLUSIONS : A set of variables that can be used in DEM based particle packing model is determined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.1
• /
• pp.377-383
• /
• 1996

Interaction of flames in a lean-rich concentration field is studied numerically adopting a counterflow as a model problem. Detailed kinetic mechanism is adopted in analyzing the structure of various type of flames which can be found in lean-rich interaction. Flow field is simplified to quasi one-dimensional by using boundary layer approximation and similarity formulation. Triple flames are identified and its structure shows that a diffusion flame is located in the middle of two premixed flames. Such a diffusion flame is formed by $H_2$ and CO generated from the rich premixed flame and $O_2$ leaked from the lean premixed flame. The flame position can be identified either from the hydrogen production rate or the heat release rate. Transition from single diffusion flame to triple flame is observed as degree of premixing is increased.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1698-1707
• /
• 2013

Optimization of the dietary formulation is the most effective way to reduce methane. Nineteen feed ingredients (brans, vegetable proteins, and grains) were evaluated for their potential to generate methane and change methanogen diversity using an in vitro ruminal fermentation technique. Feed formulations categorized into high, medium and low production based on methane production of each ingredient were then subjected to in vitro fermentation to determine the real methane production and their effects on digestibility. Methanogen diversity among low, medium and high-methane producing groups was analyzed by PCR-DGGE. The highest methane production was observed in Korean wheat bran, soybean and perilla meals, and wheat and maize of brans, vegetable protein and cereal groups, respectively. On the other hand, corn bran, cotton seed meal and barley led to the lowest production in the same groups. Nine bacteria and 18 methanogen 16s rDNA PCR-DGGE dominant bands were identified with 83% to 99% and 92% to 100% similarity, respectively. Overall, the results of this study showed that methane emissions from ruminants can be mitigated through proper selection of feed ingredients to be used in the formulation of diets.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1071-1076
• /
• 2007

Polychlorinated biphenyls(PCBs) and polybrominated diphenyl ethers (PBDEs) were measured in pine needles of Seoul, and Ansung(GyeongGi-do) to investigate composition, source, and regional concentration of PBDEs. Concentration of total PCBs in Seoul and Ansung showed 608, 945 pg/g DW (mean: 777 pg/g DW), respectively, also concentration of total PBDEs(pg/g DW) in Seoul and Ansung showed 7944, 14,255 pg/g DW(mean 11,100 pg/g DW). Tetrachlorinated biphenyls(Tetra-CBs) and Decabromodiphenyl ethers (Deca-BDE) were detected in relatively high concentration compared to other PBDE congeners in Seoul and Ansung. Correlation coefficients(r) of between PCB congeners in pine needles detected of Seoul and Ansung were significant (r=0.85, p<0.01). It suggested that PCBs concentration in pine needles may originate from secondary sources such as air-plant partition. The similarity of between PBDE congeners profile to those of the technical mixture formulation (Bromkal 70-5DE) suggests a source of this product in these sites.

• Wind and Structures
• /
• v.11 no.3
• /
• pp.193-208
• /
• 2008

This paper focuses on assessing the failure of one of the transmission towers that collapsed in Winnipeg, Canada, as a result of a microburst event. The study is conducted using a fluid-structure numerical model that was developed in-house. A major challenge in microburst-related problems is that the forces acting on a structure vary with the microburst parameters including the descending jet velocity, the diameter of the event and the relative location between the structure and the jet. The numerical model, which combines wind field data for microbursts together with a non-linear finite element formulation, is capable of predicting the progressive failure of a tower that initiates after one of its member reaches its capacity. The model is employed first to determine the microburst parameters that are likely to initiate failure of a number of critical members of the tower. Progressive failure analysis of the tower is then conducted by applying the loads associated with those critical configurations. The analysis predicts a collapse of the conductors cross-arm under a microburst reference velocity that is almost equal to the corresponding value for normal wind load that was used in the design of the structure. A similarity between the predicted modes of failure and the post event field observations was shown.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.5
• /
• pp.285-289
• /
• 2010

Manufacturing a multi-layered tablet such as Xatral XL$^{(R)}$ is more complex and expensive than monolayered tablets, but mono-layered tablets may have less favorable release properties depending on the pharmacodynamics and pharmacokinetics of the active ingredient. We therefore sought to develop a monolayer tablet with a similar dissolution profile to the commercial alfuzosin sustained-release triple layered tablet (Xatral XL$^{(R)}$). We prepared four different mono-layered alfuzosin tablets with different concentrations of hydroxypropyl methycellulose and PVP K-90. Fomulation III with alfuzosion/mg-stearate/ HPMC/ PVP K-90 (10/5/110/95 mg/tab) has a similar dissolution rate to Xatral XL$^{(R)}$, with a similarity factor score of 81.4. However, the swelling and erosion rates of the two formulations were different, and NIR analysis showed differences in the mechanisms of drug release. Thus, although formulation III and Xatral XL$^{(R)}$ show similar dissolution rates, the mechanisms of drug release are different.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.7 s.238
• /
• pp.861-867
• /
• 2005

In order to develop oxy-fuel combustor, the Flame length characteristic of $CH_4$ with oxidizer of air and oxygen has been experimentally investigated for tile nozzle diameters of 1.6mm, 2.7mm, 4.4mm and 7.7mm. The structure of $CH_4$ flame with oxidizer of oxygen was sharp in contrast with the $CH_4$ flame with oxidizer of air. The stability of $CH_4$ flame with oxidizer of oxygen was higher than $CH_4$ flame with oxidizer of air. In all $CH_4$ flames with oxidizer of air and oxygen, the flame length were dependent on the flowrate in laminar flame regime, and in turbulent flame dependent on the initial jet diameter. Using correlation equation of Delichatsios, the flame length has been expected exactly for $CH_4$ flame with oxidizer of air, but underestimated for $CH_4$ flame with oxidizer of oxygen. This paper proposed correlation equation of $CH_4$ flame with oxidizer of oxygen.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.69-73
• /
• 1999

In this paper, an algorithm based on Snakes is proposed to detect the boundary of 3D images. From the first-slice MR image, the boundary of an object is detected manually. The detected boundary points are used as initial control points for detecting the boundary of the next MR image. To detect the boundary from the rest of MR images automatically, an energy term using spatial correlation between adjacent images is added to the Greedy Snakes energy formulation. A measure of shape similarity called BMD was used to evaluate the accuracy of the proposed algorithm. The average BMD value for the proposed algorithm's result is higher than Greedy algorithm's showing the utility of the proposed method.