• 한국소음진동공학회논문집
• /
• 제24권4호
• /
• pp.310-316
• /
• 2014

The location template matching(LTM) method is a technique of identifying an impact location on a structure, and requires a certain measure of similarity between two time signals. In general, the correlation coefficient is widely used as the measure of similarity, while the group delay based method is recently proposed to improve the accuracy of the impact localization. Another possible measure is the frequency response assurance criterion(FRAC), though this has not been applied yet. In this paper, these three different measures of similarity are examined comparatively by using experimental data in order to understand the properties of these measures of similarity. The comparative study shows that the correlation coefficient and the FRAC give almost the same information while the group delay based method gives the shape oriented information that is best suitable for the location template matching method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.506-511
• /
• 2014

The location template matching (LTM) method is a technique of identifying an impact location on a structure, and requires a certain measure of similarity between two time signals. In general, the correlation coefficient is widely used as the measure of similarity, while the group delay based method is recently proposed to improve the accuracy of the impact localization. Another possible measure is the frequency response assurance criterion (FRAC), though this has not been applied yet. In this paper, these three different measures of similarity are examined comparatively by using experimental data in order to understand the properties of these measures of similarity. The comparative study shows that the correlation coefficient and the FRAC give almost the same information while the group delay based method gives the shape oriented information that is best suitable for the location template matching method.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.63-70
• /
• 1994

Laser processing workmen should select the working condition for laser cutting of new materials by the preparatory experiments for that material or from the past experiences in cutting of other similar materials. This paper proposes a criterion to determine how much a material is similar to other materials by using the Sugeno fuzzy integral. With the proposed criterion the laser processing workman can objectify the considered material for his decision. The expert system programmer can give the system a high flexibility by experimenting with some materials in a large range of similarity and can support the laser processing workman by offering the similarity between materials.

• 한국지능시스템학회논문지
• /
• 제20권5호
• /
• pp.701-709
• /
• 2010

본 논문에서는 영상간의 거리에 반비례하고 상관성에 비례하는 조합형 유사성 척도에 의한 효율적인 서명인식 방법을 제안하였다. 여기서 거리는 영상의 공간적 속성을 반영하기 위함이고, 상관성은 통계적 속성을 반영하기 위함이다. 이렇게 하면 서명의 위치, 크기, 회전과 같은 기하학적 변화와 모양변화에 강건한 인식이 가능하다. 상관성의 척도로 이진영상의 히스토그램에 기반을 둔 4 방향의 위치를 고려한 정규상호상관계수를 이용함으로써 서명사이의 유사성을 좀 더 빠르고 정확하게 반영하였다. 제안된 방법을 20개의 288$\times$288 픽셀 트럭영상과 105개의 256$\times$256 픽셀의 서명영상을 대상으로 각각 실험한 결과, 영상의 속성을 잘 반영한 우수한 인식성능이 있음을 확인하였다. 특히 정규상호상관계수와 순서값의 거리를 조합한 척도가 city-block이나 Euclidean 거리를 각각 조합한 척도보다 우수한 인식성능이 있음도 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2243-2245
• /
• 1998

In this paper, we treat image segmentation as a graph partitioning problem. and use the normalized cut for segmenting the graph. The normalized cut criterion measures both the total dissimilarity between the different graphs as well as the total similarity within the groups. The minimization of this criterion can formulated as a generalized eigenvalues problem. We have applied this approach to segment static image. This criterion can be shown to be computed efficiently by a generalized eigenvalues problem

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.585-600
• /
• 2017

This study deals with simple solutions for a spherical or circular opening excavated in elastic-brittle plastic rock mass compatible with a linear Mohr-Coulomb (M-C) or a nonlinear Hoek-Brown (H-B) yield criterion. Based on total strain approach, the closed-form solutions of stresses and displacement are derived simultaneously for circular and spherical openings using original H-B and M-C yield criteria. Two simple numerical procedures are proposed for the solution of generalized H-B and M-C yield criteria. Based on incremental approach, the similarity solution is derived for circular and spherical openings using generalized H-B and M-C yield criteria. The classical Runge-Kutta method is used to integrate the first-order ordinary differential equations. Using three data sets for M-C and H-B models, the results of the radial displacements, the spreading of the plastic radius with decreasing pressure, and the radial and circumferential stresses in the plastic region are compared. Excellent agreement among the solutions is obtained for all cases of spherical and circular openings. The importance of the use of proper initial values in the similarity solution is discussed.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1365-1374
• /
• 2006

In this paper, we consider a decision-theoretic oriented, objective Bayesian inference for the difference between two normal means with known variances. We derive the Bayesian reference criterion as well as the intrinsic estimator and the credible region which correspond to the intrinsic discrepancy loss and the reference prior. We show the similarity between derived two-sample results and the results for the one-sample case in Bernardo(1999).

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.51-60
• /
• 2016

PURPOSES : The applicability of the mechanics-based similarity concept (suggested by Feng et al.) for determining scaled variables, including length and load, via laboratory-scale tests and discrete element analysis, was evaluated. METHODS: Several studies on the similarity concept were reviewed. The exact scaling approach, a similarity concept described by Feng, was applied in order to determine an analytical solution of a free-falling ball. This solution can be considered one of the simplest conditions for discrete element analysis. RESULTS : The results revealed that 1) the exact scaling approach can be used to determine the scale of variables in laboratory tests and numerical analysis, 2) applying only a scale factor, via the exact scaling approach, is inadequate for the error-free replacement of small particles by large ones during discrete element analysis, 3) the level of continuity of flowable materials such as SCC and cement mortar seems to be an important criterion for evaluating the applicability of the similarity concept, and 4) additional conditions, such as the kinetics of particle, contact model, and geometry, must be taken into consideration to achieve the maximum radius of replacement particles during discrete element analysis. CONCLUSIONS : The concept of similarity is a convenient tool to evaluate the correspondence of scaled laboratory test or numerical analysis to physical condition. However, to achieve excellent correspondence, additional factors, such as the kinetics of particles, contact model, and geometry, must be taken into consideration.

• 대한가정학회지
• /
• 제36권11호
• /
• pp.129-139
• /
• 1998

The purpose of this study was to develop criterion scores for the Korean version of the Maternal Behavior Q-set. The Maternal Behavior Q-set was developed as a means of describing maternal behavior at home. This Q-set consists of 90 items which are sorted to reflect the degree of similarity with mother's observed behavior. A mother's sensitives score is the correlation between this description of her behavior with the criterion scores of Maternal sensitivity. The criterion scores of Maternal sensitivity were developed by 10 judges who are cognizant in attachmet theory and maternal behavior in natural contexts. The correlation among each of the 10 judge's maternal sensitivity scores was grater than .72. The maternal sensitivity criterion scores developed for Korean mothers correlated highly with the criterion scores for North American mothers. And the interobservers' correlation of the sensitivity scores ranged between. .47∼.93. According to the items in the Maternal Behavior Q-set judged to be most like and most unlike the prototypically sensitive mothers, "When baby is distressed, mother is able to quickly and accurately identify the source" proved to be the most sensitive maternal behavior item. "Mother seldom speaks to the baby directly" was the least sensitive maternal behavior item.

• 한국방재안전학회논문집
• /
• 제12권3호
• /
• pp.13-24
• /
• 2019

실시간 재난위험도 예측 모델인 SIND 모델의 정확도 확인 및 검증을 위해 다양한 형상유사도 개념을 적용하였다. 기하학적 방법론 중에서 가장 널리 이용되는 CRITIC 기법은 침수예상도와 같은 복잡한 지형 형상에 적용하기에는 분명한 한계점을 보여서 본 연구에서는 복잡한 전파특성의 형상을 평가할 수 있는 RCCI와 TF 등과 같은 형상인자를 추가하여 수정된 CRITIC 기법을 제시하였다. 본 연구에서 제안된 형상유사도 평가 방법을 폭풍해일의 침수예상도에 적용하여 검토한 결과, 면 객체 쌍들을 수동으로 정 매칭쌍과 오 매칭쌍으로 구분하였으며, 각 형상 인자들, 위치기준, 면적기준, 형상 기준의 가중치들을 변화시켜가며 각 매칭쌍의 형상유사도를 산정하였다. 본 연구에서 제안된 방법론과 산정된 가중치를 참고자료인 침수예상도의 지도 객체와 목표자료인 SIND 모델결과의 객체에 적용한 결과, 정 매칭쌍은 약 90%가 형상유사도 0.5 이상의 값을 가졌고, 오 매칭쌍은 약 70%가 0.5 미만으로 나타났다. 향후 다수의 객체가 하나의 객체와 대응되는 점을 보완 조정한다면 정 매칭쌍의 형상유사도는 전체적으로 증가하고 오 매칭쌍의 형상유사도는 감소할 것이라 판단된다.