• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.254-266
• /
• 1996

The purpose of this study was to evaluate the degree of marginal leakage that is made by wet bonding to dentin and dissolution of dentinal collagen layer in vivo and in vitro. Class V cavities were prepared to 32 cat's canine teeth and they were randomly assigned into the following 4 groups : Group 1 (not acid conditioned) ; Group 2 (acid-conditioned and blot-dried) ; Group 3 (acid-conditioned and air-dried for 30 seconds) ; Group 4 (acid-conditioned and retreated with 10% NaOCl solution). The acetone-based primer and bonding agent of All Bond 2(Bisco Inc., U.S.A.) and composite resin(Z-100, 3M. Dent. Prod., U.S.A.) were then applied. The resin collar and cap attached to each specimen and 50% silver nitrate solution was placed inside the resin cap for 3 hours. After the canine tooth was resected in level of cervical third, specimens were highly polished and observed the degree of the dye penetration on incisal and gingival margins. The results were as follows ; 1. There was no significant difference of marginal leakage in all the groups between in vivo and in vitro. 2. In vivo, the degree of leakage on the gingival margin showed the lowerest in group 4 and followed by group 2, 3 and group 1 with ascending order. However, there was no statistical difference among all the groups(p>0.05). 3. In vitro, the degree of leakage on the gingival margin showed the lowerest in group 2 and followed by group 4, 3 and group 1 with ascending order. However, there was no significant difference among the experimental groups(p>0.05). 4. The marginal leakage of the incisal margin in vitro was significantly higher in group 1 than the remaining groups(p<0.05).

• The Mathematical Education
• /
• v.54 no.2
• /
• pp.119-141
• /
• 2015

As the population of senior citizens has been increasing very rapidly, the importance of their education is gradually emphasized. To maintain their mental and physical health, the solution on the biological, physical, and educational approach might be helpful and effective. Especially in the aspect of the educational approach, the mathematics education can be regarded as an important subject for keeping the seniors in a good mental health. The reason is that the ultimate goal of mathematics education is to pursue an enhancement of mathematical thinking ability. By the reason, this study aimed to develop mathematical materials for enhancing seniors' thinking ability, and the seniors usually belong to fifties and sixties. To this purpose, this study selected the six essential mathematical thinking elements and four mathematical domains of 'number and operation', 'shape and measurement', 'possibility', and 'patterns'. Based on these elements, the mathematical materials including the nine types of activities using games and commercial manipulatives were developed. On the subject of 52 female seniors, the instruction was conducted using a part of the materials during 100 minutes. Also, 13 survey items were developed beforehand, and the survey was implemented after the class, and eventually 48 seniors responded in the survey. As a result, it is meaningful to develop the materials not only for enhancing mathematical thinking ability but for understanding and utilizing the content of materials. Furthermore, it is requested that those materials be differentiated according to the degree or the difference of age, academic ability, and sex.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.217-223
• /
• 2013

This research tries to study the effect that the welfare field training the course selection. Because of being the important place where the welfare field training trains the expert, the knowledge, value, and practical lodging tries to be identify instructed. In this aspect, we try to analyze about the extend of satisfaction of the actual training, that is the extent of desiring the link including the class of school subject extend of satisfaction of the department of social welfare engine, and etc. and factor about the actual training of the department of social welfare, because the welfare field training the technique is connected directly with the route. First, the individual characteristic of the social welfare and trainees is grasped. Second, the relationship of the social welfare and factor and course selection is investigated. Third, the social welfare and university (circle) lives look into whether the social welfare field training has an effect on the course selection or not.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.1-17
• /
• 2007

This study is a review of Ipsik, the decorative ornaments found on traditional Korean horsehair hats, known as Ipja, which were worn by men in the late Joseon Dynasty. In a broad sense, Ipsik are regarded as men's accessories. Therefore, although this study is limited to Ipja, it is significant in the sense that it delves into one facet of men's accessories in detail. Because the appearance of the horsehair hats was rather mundane, Ipsik and Ibyeong were added as ornaments. During the Joseon period, various types of hat ornaments existed, named Maeksu, Hosu, Gongjagu, Sangmo, Jingdori, Ijeon, Guyeongja and Ibyeong. A person's social ranking and class could be discerned by the materials used in the Ipsik he wore. Jeongja, a decorative accessory used to attach to an official's hat, was institutionalized in the sixteenth year of King Gongmin's reign(1367), during the Goryeo Dynasty, prior to the founding of China's Ming Dynasty in 1368, which indicates that Jeongja were influenced by the Yuan Dynasty. A record in Lao Chi'ta (a textbook of spoken Chinese estimated circa 1346) confirms this fact. Based on a review of literature, we learn that just as with Ongno, Jeongja were imported for use on Jeonrip, a soldier's hat. During the Ching Dynasty, Jeongja were further subdivided and more exquisitely designed. On the other hand, in the Joseon Dynasty, a rule was handed down mandating that a royal prince use gold for his jeongja, officials at third rank or above use silver, and governors, commanders in chief, and officials with the Office of Inspector General and Office of Censor General use jade. Inspectors were permitted to use crystal. Jeongja made of jade were used until the late Joseon Dynasty.

• Restorative Dentistry and Endodontics
• /
• v.46 no.1
• /
• pp.3.1-3.14
• /
• 2021

Objectives: This study aimed to evaluate the interface between a calcium silicate cement (CSC), Biodentine and dental adhesives in terms of sealing ability. Materials and Methods: Microleakage test: 160 standardized class II cavities were prepared on 80 extracted human molars. The cavities were filled with Biodentine and then divided into 2 experimental groups according to the time of restoration: composite resin obturation 15 minutes after Biodentine handling (D0); restoration after 7 days (D7). Each group was then divided into 8 subgroups (n = 5) according to the adhesive system used: etch-and-rinse adhesive (Prime & Bond); self-etch adhesive 2 steps (Optibond XTR and Clearfil SE Bond); self-etch adhesive 1 step (Xeno III, G-aenial Bond, and Clearfil Tri-S Bond); and universal used as etch-and-rinse or self-etch (ScotchBond Universal ER or SE). After thermocycling, the teeth were immersed in a silver nitrate solution, stained, longitudinally sectioned, and the Biodentine/adhesive percolation was quantified. Scanning electron microscopic observations: Biodentine/adhesive interfaces were observed. Results: A tendency towards less microleakage was observed when Biodentine was etched (2.47%) and when restorations were done without delay (D0: 4.31%, D7: 6.78%), but this was not significant. The adhesives containing 10-methacryloyloxydecyl dihydrogen phosphate monomer showed the most stable results at both times studied. All Biodentine/adhesive interfaces were homogeneous and regular. Conclusions: The good sealing of the CSC/adhesive interface is not a function of the system adhesive family used or the cement maturation before restoration. Biodentine can be used as a dentine substitute.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.337-343
• /
• 2006

The purpose of this study was to estimate the relation between techniques used for microleakage from dye penetration and for marginal adaptation from SEM evaluation of the restoration. Using high speed #330 bur class V cavities ($4{\times}3{\times}1.5 mm$ around CEJ) were prepared on the buccal surface of 20 extracted human molars. Six dimples as reference points for SEM and dye penetration evaluation were made with 1/2 round bur. Cavity was bulk filled with microhybrid composite resin (Esthet X) and all-in-one adhesive (Xeno III). Teeth were stored in saline solution for one day, after then, they were finished and polished using Sof-Lex system. Fifty percent silver nitrate dye solution was used for the evaluation of microleakage and resin replica was used for marginal adaptation. All of these were done after 1000 times thermocycling between 5 and $55^{\circ}C$. Vertical sections were made through three dimples of restoration to obtain samples for the evaluation of dye penetration and inner marginal adaptation. Outer adaptational estimation was done with an intact restoration before sectioning. Dye penetration was determined in three degrees and percentage of outer and inner leaky margin was estimated from SEM image The data were analysed statistically: Spearman's rho test were used to check relationships between two methods. The result were as follows : 1. There were significant relationships between degree of dye penetration and inner and outer marginal adaptations each (p < 0.01). 2. However, there was no significant relationship between the results or inner and outer marginal adaptation. Within the results of this study, relationship between the percentage of marginal adaptation and microleakage shows significant relationship. However, inner and outer marginal adaptation did not show any significant relationship mutually.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.175-184
• /
• 2005

With the rapid progress of the aging society in Korea, the silver generation is emerging as another class of users in the new population structure. This is a social issue to be dealt with, and the effect of such a change is being observed dearly in the design area. In addition, there are increasing demands for consideration of minor groups of users including the elderly, the disabled, the left-handed, children and pregnant women and nursing mothers, who have been treated as the weak. Such a human-centered idea may be the manifestation of the recovery of humanity and the self-realization of human beings through experiences and reflections of the industrial society of the past. The present study examined the tendency of design standardization centering on universal design, which has emerged in response to user-centered social needs, and suggested general considerations for the necessity of introducing such standards. These days the meanings of standardization are not limited to quality, performance, safety and economic aspect. Standardization is required to consider the diversity and the welfare of human beings. In addition, one of the important functions of standardization is to provide designers with important clues and guidelines for designing. In reality, however, standardization has been rejected by the circle of design for the reason that it deters free creation, so research on the introduction of standardization has been at standstill. As ISO/IEC Guide71 was published in November 2001, based on which, the Korea Standards Association established KS A ISO/IEC Guide71 without changing its contents. In companies' manufacturing activities, the progress of standardization in connection to universal design is growing more important. However, usefulness and interchangeability for the absolute majority resulting from standardization are incomparable. Lastly, the realization of universal design requires human-centered design mind, based on users' experiences and needs, the characteristics of the human bodies and inconvenient elements rather than standards for the sake of standardization.

• The Research Journal of the Costume Culture
• /
• v.16 no.6
• /
• pp.1050-1063
• /
• 2008

A movie is a fiction made on a basis of an author's and a writer's imagination, but all sorts of properties mixed with each other and most realistically expresses the era which becomes the background of a movie and acts as a carrier that connects designers with consumers. Thus, this study was carried out to review how the fashion products that designer's intention and commercial value added are expressed in collections by comparing and analysing the costumes in the movie "The Great Gatsby" that described the life of America's upper-class in 1920s and the 04 S/S Y&Kei collection which were proceeding after getting inspiration from this movie. For this, literature materials were inspected in order to make a theoretical review on social and cultural background and costumes history background in 1920s and the photo materials on movie costume were collected and analysed using DVD video captures, as well as the photo materials on 04 S/S Y&Kei were collected and analyzed through the institute providing domestic fashion information. The following conclusion was deduced through this study. First, in 1920s which becomes the background of this study, the slim shape of Flapper which looks like a young and boy became an ideal figure condition and the straight silhouette with low waist line and the short skirt that rose to knee was popular. Second, as a result of analysing movie costume by classifying it in silhouette, colors, and materials, straight silhouette of low waistline with a near colored - tone seen in the pastel series, including white, beige, pink, and gray was mainly constituted and the metal colors like silver and gold were used. As a material, chiffon, satin, velvet, flower patterned prints, and beads were used, which represented luxurious life of women in the upper classes. Third, as a result of comparing and analysing, it turned out that there was a similarity. However, in dress collection for a heroine, some dissimilarity differentiated from a movie costumes was found out in that the dresses in collection expressed moderate beauty and modernism and elegant beauty at the same time by matching a variety of materials and using black color.

• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.121-130
• /
• 1995

This project has been worked out for isolation of EPA-producing bacteria from marine source of sea water, sea sediment and intestinal contents eviscerated from some red-muscle fish such as mackerel, horse-mackerel and spike fish. The samples were precultured on the media of PPES-II glucose broth and then pure-cultured on Nutrient agar and P-Y-M glucose. Lipids extracted from those bacterial mass collected by centrifugation were analysed in terms of lipid class and fatty acid composition. The results are resumed as follows : 1. 112 strains from sea water and 76 strains from sea sediment were tested for their EPA producing capability, but both strains of (SA-67 and SA-91) from the former and four strains(SS-35, 37, 51 and 71) from the latter have been proved to produce EPA above the level of 2% of total fatty acids. The strains such as GS-11, 29, 31, HM-9, 29, B-18, 33, 107, YL-129, 156, 203, 77, 104 and 256 which were isolated from fish intestinal contents, have also produced EPA at higher level than 2% of total fatty acids. 2. Contents of total lipids extracted from the cultures of these strains grown at $25^{\circ}C$, range from 2.8% to 6.9% (on dry weight %), and they are mainly composed of polar lipids($40.9{\sim}52.9%$) such as phosphatidyl glycerol($^{+}cardiolipin$)(?) and phosphatidyl ethanolamine ($33.8{\sim}40.0%$), with smaller amount of free fatty acid ($11.2{\sim}20.2%$). 3. EPA was isolated from a mixture of fatty acid methyl esters obtained from the lipid of each strain by HPLC in silver-ion mode and was identified by GC-Mass spectrometry. 4. The strains of SW-91, GS-11, GS-29, HM-9, B-18 and YL-203 grown at $25^{\circ}C$ have a level of 5% EPA in their total fatty acids, and the GS-11 and HM-9 strains show a tendency of increase in the EPA level with an increase of growth temperature.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.