• 공업화학
• /
• 제10권5호
• /
• pp.701-706
• /
• 1999

실록산 올리고머가 에폭시 수지의 열안정성 및 내부 응력에 미치는 영향에 대해서 고찰하였다. 분자 말단에 에폭시기를 갖는 실록산-에폭시 중합체를 실록산-DDM 예비 중합체와 DGEBA계 에폭시 수지를 반응시켜 제조하였다. TGA 데이터를 사용하여 열분해 개시 온도(initial decomposition temperature, IDT), 최대 중량 감소 시의 온도(temperature of maximum rate of weight loss, $T_{max}$), 적분 열분해 진행 온도(integral procedural decomposition temperature, IPDT), 그리고 분해 활성화 에너지($E_t$) 등을 구한 후 측정된 열안정성은 실록산 올리고머의 함량이 증가함에 따라 증가하였으며 5wt%의 실록산 올리고머를 함유한 조성에서 최대값을 나타내었다. 본 블렌드의 열팽창 계수(coefficient of thermal expansion, ${\alpha}_r$)와 굴곡 탄성률($E_r$)로부터 내부응력을 구하였으며, 실록산 올리고머의 함량이 증가할수록 ${\alpha}_r$와 $E_r$가 동시에 감소해 내부응력이 규칙적으로 저하되었다.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.258-263
• /
• 2001

Siloxane thin films were fabricated on a silicon wafer by spin-coating using a siloxane solution made by the sol-gel process. Fluorine was doped using$ CF_4$ plasma treatment. The film was then annealed in-situ state in the nitrogen atmosphere. In order to examine the influence of annealing and fluorine doping on the siloxane thin film, thermogravimetric-differential thermal analysis (TG-DTA), Fourier transform-infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were used and the dielectric constant was determined by the high-frequency capacitance-voltage method. Stable siloxane films could be obtained by in-situ annealing in a nitrogen atmosphere after $CF_4$ plasma treatment, and the dielectric value of the film was $\varepsilon$ 2.5.

• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.203-207
• /
• 2009

소형 반도체 접착에 쓰이는 비전도성 고분자 접착제에서 발생하는 문제점으로는 접착소재와 칩 또는 기판 간의 열 팽창계수 차이에 의한 박리, 크래킹 및 접착력 부족 등이 있다. 이러한 결점의 보완을 위하여 무기입자를 첨가한 고분자 복합소재를 통해 접착제의 열팽창계수를 낮추거나, 접착소재에 유연성 첨가제를 첨가하는 방법 등이 사용되고 있다. 본 연구에서는 양 말단에 아민기를 가지는 아미노 변성 실록산(AMS)의 함량을 1, 3, 5 phr로 변화시켜 실록산/에폭시 복합재를 제조하였다. 그 결과, 실록산의 첨가는 유리전이 온도를 $134^{\circ}C$에서 $122^{\circ}C$까지, 모듈러스를 2,425 MPa에서 2,143 MPa까지 감소시켰으며, 열팽창계수는 67 ppm/에서 71 ppm/까지 상승시켰다. 실록산은 유연성 부여에는 효과를 나타냈지만, 유리전이온도의 감소를 가져오는 것을 확인하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 춘계 총회 및 학술발표회
• /
• pp.49-52
• /
• 2003

• 공업화학
• /
• 제17권5호
• /
• pp.465-470
• /
• 2006

실록산은 많은 소비 및 공업제품에 사용되고 있고 이들이 매립되어 발생되는 매립가스에는 휘발성 실록산을 포함한다. 휘발성 실록산을 포함한 매립가스를 가스엔진의 연료로 사용할 경우 매립가스내 휘발성 실록산은 가스엔진뿐만 아니라 전처리 시설에 큰 해를 입히게 된다. 따라서 본 연구에서는 매립가스내 휘발성 실록산 흡착제로서 활성탄 대용으로 천연 점토광물인 질석과 일라이트를 사용해 이의 유용성을 검토하였다. 질석, 일라이트 및 활성탄의 SEM 및 BET 분석을 통해 이들의 물성값을 비교하였다. 또한 일라이트 및 질석을 흡착제로 사용하여 D5 실록산의 흡착용량을 평가 하였는바, 각각 1.7 g/g 일라이트 및 3.8 g/g 질석의 대단히 높은 흡착용량을 나타내었다.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.16-23
• /
• 2004

The silica containing carbon (C-SiO$_2$) membranes were fabricated using poly(imide siloxane) (PIS) having -CO- swivel group. The characteristics of porous C-SiO$_2$ structures prepared by the pyrolysis of poly(imide siloxane) were related with the micro-phase separation between the imide block and the siloxane block. Furthermore, the nitrogen adsorption isotherms of the CMS and the C-SiO$_2$ membranes were investigated to define the characteristics of porous structures. The C-SiO$_2$ membranes derived from PIS showed the type IV isotherm and possessed the hysteresis loop, which was associated with the mesoporous carbon structures, while the CMS membranes derived from PI showed the type I isotherm. For the molecular sieving probe, the C-SiO$_2$ membranes pyrolyzed at 550, 600, and 700$^{\circ}C$ showed the O$_2$ permeability of 924, 1076, and 367 Barrer (1 ${\times}$ 10$\^$-10/㎤(STP)cm/$\textrm{cm}^2$$.$s$.$cmHg) and O$_2$/N$_2$ selectivity of 9, 8, and 12.

• Bulletin of the Korean Chemical Society
• /
• 제25권8호
• /
• pp.1182-1188
• /
• 2004

Polydisperse oligo(PO-b-EO) allyl ether siloxane surfactants were synthesized by the hydrosilylation reaction of OMTS with Allyl-oligo(PO-b-EO) series. The surface tension of siloxane surfactants increased with increasing the EO chain length while it decreased with increasing the PO ratio. However, the sedimentation time of the aqueous solution showed opposite trend to the surface tension data. Both the surface tension and sedimentation time of the aqueous solution containing inorganic electrolyte gradually decreased as the content of inorganic electrolyte increased because of the surface arrangement of surfactant molecules. However, they increased with an increase of pH values due to the hydrolysis of the siloxane backbone. The $C_p$ values tended to increase with the increase in the EO chain length and decrease of the PO ratio. It seems that intermolecular interaction between PO/EO block copolymer and water affects the variation of transition temperature.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.336-336
• /
• 2006

The present work is focused on the synthesis of a series of fully aliphatic polyimides and the incorporation of adamantane moieties and siloxane groups to them and studies the deviation in the basic traits of the fully aliphatic polyimides. In this work, we wish to discuss how adamantyl group and siloxane moieties influence the basic properties of aliphatic polyimides (APIs), by synthesizing various fully aliphatic polyimides and polyimidesiloxanes (APISiO).

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1665-1669
• /
• 2014

Four multialkoxy-functionalized siloxane base-polymers (BP-1~4) were synthesized through either hydrosilylation or condensation reactions in order to prepare multi-networked siloxane polymers having appropriate physical properties for protective coating in fabrications of electronics. Formulations of 4 base-polymers gave coating materials A and B. Product A showed well-controlled flowing and leveling properties, and product A-2 was successfully applied to protective insulating coating for junction areas of connectors and chips in PDP controller. Tack free time, extrusion rate, dielectric breakdown voltage, hardness, thermal stability, water resistance and flame resistance of products A and B were examined.

• Environmental Engineering Research
• /
• 제16권3호
• /
• pp.159-164
• /
• 2011

This study examined the emission characteristics of impure gas-like hydrogen sulfide and siloxane contained in landfill gas (LFG) and investigated the effect of impure gas on LFG utility facilities. As a result of an LFG component analysis from eight landfills in the same environment, hydrogen sulfide averaged 436 ppmv (22-1,211 ppmv), and the concentration of total siloxane averaged 7.95 mg/$m^3$ (1.85-21.18 mg/$m^3$). In case of siloxane concentration by component, the ratio of D4 (average 3.79 mg/$m^3$) and D5 (average 2.64 mg/$m^3$) indicated the highest level. Different kinds of scales were found on the gas air heater (GAH) and inside the boiler. The major component of scale from the GAH was $Fe_2O_3$ of 38.5%, and it was caused by hydrogen sulfide. Other scale was found on the bottom and the wall of the boiler and the scale was silicon dioxide of 92.8% and 98.9%. The silicon dioxide scale was caused by combustion of siloxane. As a result of a scanning electron microscopy analysis, the structure of the silicon dioxide scale from the boiler was an immediate filamentous type. Consequently, as silicon dioxide scale is bulky, such bad effects were worsening, as an interruption in heat conduction, increase in fuel consumption, damage to the boiler by overheating, and clogged emission pipeline could occur in LFG utility facilities.