• 패션비즈니스
• /
• 제7권2호
• /
• pp.156-164
• /
• 2003

It has been known that the natural colorants exhibit good dye-uptake toward cotton, silk, and wool fibers, while they do poorly toward synthetic fibers. This study utilizes the chitosan treatment in order to improve the dye-uptake for the natural fibers and to enable the synthetic fibers, whose dye-uptake levels are low, show better affinity toward the natural colorants. Since chitosan has $-NH_2$ group and -OH group in the structure, the dyeability of the fabric will be improved when the fabric is treated with the chitosan. Cotton fabric as one of the natural fiber fabrics and nylon fabric as one of the synthetic fiber fabrics were selected for this study. 1. In case of cotton fabric, the chiosan treatment takes effect for the Caesalpinia sappan and cochineal, resulting in remarkable ${\Delta}E$ increase after dyeing. Chitosan helps in developing dark shade by increasing the uptake of the Caesalpinia sappan and cochineal. It does not, however, participate in the developing of the specific color as does a metallic mordant. 2. In case of dyeing cotton fabric with Gardenia jasminoides, the effect of the treatment with mordant and chitosan is not very pronounced. It is thought that the Gardenia jasminoides uptake is accomplished in a direct manner in the cellulose chains without the aid of mordant. 3. Air-permeability is decreased when the non-mordanted and non-chitosan treated cotton fabric is dyed with Caesalpinia sappan, cochineal, and Gardenia jasminoides. 4. In case of nylon fabric, premordanting and chitosan treatments are not highly effective in promoting the dye-uptake.

• 한국염색가공학회지
• /
• 제13권5호
• /
• pp.18-18
• /
• 2001

Natural colorants have attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption peaks in the range of 240∼400 nm. From the result of IR spectra, the major ingredient of extract of Ginkgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• 한국의류산업학회지
• /
• 제6권4호
• /
• pp.433-439
• /
• 2004

Hanji costumes has four aspects that allow the creator or artist to create many variations. The pictorial effects of Hanji costumes are produced through variations in the dyes and brushes used for its application. The amount of water and texture of the Hanji mixture also influences the Hanji clothing. This effect was expressed using a dry brush technique, a dripping technique, India inks, and fragments from other Hanji works. A second aspect of Hanji clothing is the coloring effect in the Hanji costumes. The coloring is due to the fibers in the preparation mixture and the uniqueness of the dyes. The Hanji clothing was dyed various colors and patterns by dip dyeing, block dyeing, silk screens, digital printing. The third aspect of Hanji imagination in clothing is the decorative details. The details in Hanji clothing can be seen using frills, pleats, tucks and ribbons. The last variation of Hanji clothing can be expressed through crafting techniques. These techniques are the quality of paper string, cuts in the paper and paste ingredients. With Hanji cloth, it is possible to plait, roll, and crample into other flexible & useful materials.

• 한국의류학회지
• /
• 제37권3호
• /
• pp.413-423
• /
• 2013

Chlorophyll is an abundant pigment found in all green plants, algae, and cyanobacteria. This study uses methanol, acetone and water to extract spinach and mate powders in order to examine the possibility of dyeing animal fibers with chlorophyll without chemical alteration. It was shown that methanol extracts of spinach and mate powders can be effectively used to dye wool and silk fabrics if the extract is mixed with water by methanol:water 65:35 v/v. Compared to methanol extract, the acetone extract showed lower chlorophyll yield and lower dye uptake. Water was not an appropriate solvent for chlorophyll extraction and dyeing. Spinach powder showed a higher dye uptake than mate powder due to the higher chlorophyll content than mate powder. It is possible that the chlorophyll dyeing of wool and silk fabrics is due to the hydrogen bonding between the hydroxy amino acids in fiber and the carbonyl groups of chlorophyll. These carbonyl groups are on the heterocyclic ring and the methyl and ethyl side chains of chlorophyll.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.32.1-32.5
• /
• 2015

Background: The aims of present study were (1) to evaluate new bone formation among the 4-hexylresorcinol (4HR)-incorporated silk fabric membrane (SFM), conventional SFM, and uncovered control groups and (2) to compare the amount of residual membrane between the 4HR-incorporated SFM and conventional SFM in a rabbit parietal defect model. Methods: Nine New Zealand white rabbits were used for this animal study. After the formation of a bilateral parietal bone defect (diameter 8.0 mm), either 4HR-incorporated SFM or conventional SFM was grafted into the defect. The defect in the control was left uncovered. New bone formation and the amount of residual membrane were evaluated by histomorphometry at 8 weeks after the operation. Results: The total amount of new bone was $37.84{\pm}8.30%$ in the control, $56.64{\pm}15.74%$ in the 4HR-incorporated SFM group, and $53.35{\pm}10.52%$ in the conventional SFM group 8 weeks after the operation. The differences were significant between the control and 4HR-incorporated SFM group (P = 0.016) and between the control and conventional SFM group (P = 0.040). The residual membrane was $75.08{\pm}10.52%$ in the 4HR-incorporated SFM group and $92.23{\pm}5.46%$ in the conventional SFM group 8 weeks after the operation. The difference was significant (P = 0.039). Conclusions: The 4HR-incorporated SFM and conventional SFM groups showed more bone regeneration than the control group. The incorporated 4HR accelerated the partial degradation of the silk fabric membrane in a rabbit parietal defect model 8 weeks after the operation.

• 한국의류산업학회지
• /
• 제11권5호
• /
• pp.818-826
• /
• 2009

Dyeability of microbial violacein produced from Chromobacterum violaceum CV107 on to multifiber fabrics has been studied. The bluish-purple colourants were produced by cultivation of Chromobacterum violaceum using LB liquid medium for 2 days. The colourant was extracted with 80% acetone and identified as violacein by LC/MS analysis. The violacein could be dyed on not only natural fibers such as Cotton, Silk and Wool but also synthetic fibers such as Diacetate, Triacetate, Creslan 61 and Nylon 66. Maximum K/S values were shown at 540-580 nm according to different fiber with color appearance of purple or blue. An optimum pH and temperature under dyeing condition were 10 and $70^{\circ}C$, respectively. Any mordants were not improved colour density and quality on various fabrics. From this studies, pigments produced microbe have a high potentials for natural dyeing on fabrics. Finally, development of new colourants from microbe has made a possible change for new dyeing field in respects of eco-friend and repeatability of natural dyeing for apparels.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.124-131
• /
• 2001

To find out the effect of burn out print finishing for better quality of fabric, examined processing which could make less damages on the fiber because the biggest problem is remained fibers damage after burn out print finishing. Fiber damage examined to the condition of finishing material NaHSO$_4$and H$_2$SO$_4$, 3~10min., 100~13$0^{\circ}C$, glycerin. The fiber damages evaluated the break strength and the surface condition by SEM. Among satin, pile fabric which remained fiber is silk, warp knitted fabric which remained fiber is polyester, the fibers damage level were warp knitted fabric$0^{\circ}C$, glycerin and for 6 minutes by NaHSO$_4$. When carbonized by 20%. 50% and 70% to express textile design, carbonizing rate was not effect on the fiber damage very much. There was almost no damages with glycerine, and almost no damages during 3~6minutes fixation time, 10$0^{\circ}C$ steaming heat fixation by NaHSO$_4$and H$_2$SO$_4$. Without glycerine, there were damage by hydrolysis on polyesters surface and the fiver was broken by fixation time.

• 한국의류학회지
• /
• 제43권6호
• /
• pp.891-909
• /
• 2019

This study uses a documentary survey, field survey and textile's characteristics to understand the history of the Punggi Viscose Rayon. Punggi's textile industry grew as people migrated from Pyeongan Province in the 1900s. Little is known regarding early production conditions, but documents show cottage industries in the 1940s made union cloth using silk and rayon. The Punggi weaving industry peaked after the Korean War and declined in the late 1950s. Punggi rayon at that time was mainly used for lingerie or lining, with miliary or polka dot patterns. The industry regained momentum when the power loom was introduced in the 1960s. Manufacturers also started weaving union cloth with synthetic fibers and rayon. In the 1990s, jacquard looms enabled the weaving of elaborately colored and patterned textiles for outer fabric that made Punggi rayon famous. Most Punggi rayon looms have developed in the order of manual handlooms, semiautomatic looms, Jokdapgi, to power looms. Looms equipped with dobbies or jacquard devices also changed from wooden dobby looms to wooden jacquard looms and then to iron jacquard looms. Punggi Rayon currently has its own trademark and tag, but lacks specific regulations on the blending of fibers.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1520-1526
• /
• 2005

Henna is a natural colorant and has been used to dye hair, skin and leather since civilization began. It has reddish brown to orange shade. The major color components of Henna are Lawsone(2-hydroxy-1,4-naphthaquinone) and Luteolin (3',4',5,7-tetrahydroxy-flavone). In this study, various fibers containing the nitrogen component, especially used fur underwear, were dyed with Henna under various dyeing conditions, then dyeing characteristics, color fastness, and anti-bacterial properties were evaluated. from the results, Henna has good affinity to the chlorinated wool>wool>Pu/nylon>nylon>soybean>silk in decreasing order. The color fastness of the wool fabric dyed with Henna to washing, dry-cleaning, and perspiration showed 4-5 grade. The color fastness to light was 3rd grade. These results are relatively good comparing with other natural dyes. Moreover dyed fabric with Henna showed excellent antibacterial activity.

• 사물인터넷융복합논문지
• /
• 제6권4호
• /
• pp.33-38
• /
• 2020

2007년에 천연 염료 관련 자원, 색상, 염색 원단 등 천연 염색 정보를 쉽게 제공 할 수 있도록 모바일 어플리케이션을 설계 한 것으로 알려졌다. 천연 염색과 IoT의 연관성, 응용 등에 대한 연구가 아직 부족한만큼 다양성 천연 염색에 의한 염색 패턴 변화에 관한 정보가 필요하다. 본 연구에서는, 천연 염료, 예를 들어 Lithospermum erythrorhizon가 한국에서 전통적으로 많이 사용되어온 실크에 대하여 염색 정보를 구축하고자 했다. L. erythrorhizon에서 염료의 추출은 pH4에서 수행되었다. L. erythrorhizon의 건조 된 뿌리는 짙은 갈색을 띤 자주색을 보였다. 매염제가 없는 실크 직물은 일반적으로 보라색 염색 패턴을 보였다. 타르타르산 나트륨과 구연산으로 염색 한 실크 직물은 투명한 갈색으로 염색되었다. 흥미롭게도 황산 철 (II)의 매염제 인 실크 직물은 검은 색이 아닌 밝은 회색으로 염색되었다. 알루미늄 포타슘 설페이트의 매염제를 L. erythrorhizon 추출 염료로 처리 한 결과 매염제를 처리하지 않았을 때와 거의 동일했다. 염색도를 수치로 평가 한 결과, 중크롬산 칼륨의 매염제의 처리는 약 50% 어둡고, 황산 철 (II)에 의한 염색은 약 75% 어두웠다. 이러한 결과는 L. erythrorhizon을 이용한 다양한 염색 색 적용 연구에 도움이되며, 염색 정도와 pH 농도, 색도변화라는 염색변수에 의한 염색 컨트롤러와 데이터베이스 시스템 구축에관한 정보를 제공 할 것이다.