• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.23-30
• /
• 2008

In this paper, when the silk fabric was modified by ethylene cyanohydrine, the reaction mechanism between both was studied at various treatment conditions such as curing temperatures and times, ethylene cyanohydrin concentrations and $ZnCl_2$ concentrations. Through the FT-IR and DSC analyses of the treated silk fabrics, we found the results as follows : It was observed in FT-IR analysis of the treated silk fabrics that the -OH characteristic peak($3,450cm^{-1}$)position and shape were all changed when drying and curing treatment conditions were at $80^{\circ}C$ for 3 minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the $ZnCl_2$ was 0.1%. It indicated that the -OH group of the silk participated in the reaction between the silk fabric and ethylene cyanohydrin. From the DSC analysis, it was found that the pyrolysis temperatures of the treated silk fabrics by ethylene cyanohydrin which was processed in the same condition, were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$. From the FT-IR analyses of the silk fabrics treated by ethylene cyanohydrin at the various concentrations of $ZnCl_2$, it was found that the -OH characteristic peaks($3,450cm^{-1}$) were similar to the nontreated one except that of the fabric treated at the $ZnCl_2$ conconcentration of 0.8% when drying and curing treatment conditions were at $80^{\circ}C$ for 3minute and $110^{\circ}C$ for 2.5 minute, and the concentration of the ethylene cyanohydrin was 5%. In the case of the $ZnCl_2$ concentration of 0.8% solution, a lot of change were observed in peak. From the DSC analysis of the treated silk fabrics which was processed in the same condition, it was showed that the pyrolysis temperatures of treated silk fabric were all increased from $311^{\circ}C$ to ab. $320^{\circ}C$, which was no relation with the concentration of $ZnCl_2$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.6
• /
• pp.827-836
• /
• 2013

Indigotin, indirubin, berberine, palmatine, alizarin, and purpurin are major pigments of indigo plant, Phellodendron bark, and madder. The six pigments were examined using the HPLC-DAD-MS instrument for the purpose of the simultaneous detection of the pigments in a single sample run. The HPLC-DAD-MS method examined the individual pigment solutions in DMSO, a solution containing 6 pigments, and the DMSO extract of the silk dyed with a dye solution of 5 pigments excluding indirubin. The retention times of the HPLC chromatograms, ${\lambda}_{max}$ of the uv-vis absorption bands in the DAD analyses, and the molecular ions detected for the compound peaks in the MSD analyses were consistent throughout the analyses of individual pigment solutions, mixed pigment solutions, and dye extracted from silk dyeing. The developed instrumental method of the simultaneous detection of six pigments can identify dye in an exhumed textile if the textile is dyed using any one (or multiple) pigments of indigo, Phellodendron bark, or madder plant.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.2
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.610-625
• /
• 2020

This study suggests an alternative breast-prosthesis-making process for female breast cancer patients. From June 2018 to July 2018, we conducted a study using nine females between the ages 40-50 who never had breast cancer. We recorded the reported subjective sensations and objective physiological responses to different types of artificial breast materials: Trulife silicon breast prostheses (TS) and hand-made silk breast prostheses (HS). Considering the materials used in TS and HS individually, we studied the subjective sensation with regards to how each material functioned in a photo (VP), movement (VM) and the visual tactility (VT) sense. The results showed that comparing VP and VT led to more significant differences than those comparing VM and VT. In addition, there was a significant difference in terms of tactile sensation when comparing TS and HS with respect to subjective responses to texture. Subjects reported that HS felt more comfortable and gave a better cooling sensation. However, the measured objective physiological responses indicated that skin temperature was higher with HS than TS when touched. This research contributes to scholarship around alternative and new materials to build breast prostheses for women with breast cancer.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.576-588
• /
• 2005

The effect of chitosan pretreatment on the dyeing of cotton fiber and silk fiber was investigated. However, it has been difficult to evaluate the effect of the chitosan precisely, since the characterization of the molecular weight and effect of the degree of deacetylation were not elucidated for the application. The treatment effect may change diversely since the chitosan solution viscosity differs a lot based on the chitosan molecular weight. In this study, three chitosan specimens, varying in molecular weight, were applied for the fabric pretreatment in order to investigate the effect of chitosan molecular weight. Also, in order to maximize the efficacy of the chitosan, highly deacetylated chitosan specimens, meeting the deacetylation degree of $100\%$, were selected far the application. The air-permeability change according to the chitosan molecular weight change, influence on the mordanting, color change, and wash fastness change were investigated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.124-131
• /
• 2001

To find out the effect of burn out print finishing for better quality of fabric, examined processing which could make less damages on the fiber because the biggest problem is remained fibers damage after burn out print finishing. Fiber damage examined to the condition of finishing material NaHSO$_4$and H$_2$SO$_4$, 3~10min., 100~13$0^{\circ}C$, glycerin. The fiber damages evaluated the break strength and the surface condition by SEM. Among satin, pile fabric which remained fiber is silk, warp knitted fabric which remained fiber is polyester, the fibers damage level were warp knitted fabric$0^{\circ}C$, glycerin and for 6 minutes by NaHSO$_4$. When carbonized by 20%. 50% and 70% to express textile design, carbonizing rate was not effect on the fiber damage very much. There was almost no damages with glycerine, and almost no damages during 3~6minutes fixation time, 10$0^{\circ}C$ steaming heat fixation by NaHSO$_4$and H$_2$SO$_4$. Without glycerine, there were damage by hydrolysis on polyesters surface and the fiver was broken by fixation time.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.1-10
• /
• 2004

The purpose of this study was to compare the efficiency of four different cleaning method of silk and to fabrics, which were excavated from the sixteenth century tombs. The four cleaning methods were hand washing in water and hand washing in solvent, washing in ultrasonic cleaner, and using of ultrasonic gun after washing in ultrasonic cleaner. The following is the result of the experiment: ㆍBoth silk and jute fabrics shrank the most after hand-wash in water. This cleaning method decreased their thickness the most but changed their strength the least. However, the color of the fabric changed the most after had-wash in water. This washing method might discolor the dyed fabric, so one must check the condition of the fabric thoroughly before washing it. ㆍThe weight and the thickness of the fabric changed little after ultrasonic cleaning. This cleaning method, therefore. is less efficient than hand-water-wash. The use of ultrasonic gun after ultrasonic wash for partial cleansing enhanced the efficiency a little. Nevertheless, this method left stain around the area where the gun was used, and the injected water could damage the fabric. ㆍThe excavated fabric became softer in the cleaning process as the dirt was washed away. In both cases of silk and jute fabrics cleaning, solvent made the fabric softer than water. Washed in solvent, the fabric did not swell. But water penetrated to the fiber during the cleaning process and made the fabric swell. When the water evaporates, the swollen fiber structure collapses and the fabric become stiff. Ultrasonic wash did not cause much change in the flexibility of the fabric, for this method does not remove the dirt as effectively as the other method.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.1
• /
• pp.73-78
• /
• 1971

The purpose of this study is to find out the method of conditioned weight test by which the dealing weight of raw silk can be calculated from true fiber in order to do the fair trading. The results of this study were as follows. 1. It is more reasonable than the current test that conditioned weight as a dealing weigh can be calculated by boil-off and moisture regain which is a percentage of boil-on and moisture regain to net weight. Because the boil-off and moisture regain can show directly the amount of true fiber and reproductibility in raw silk. In this study the boil-off and moisture regain is to take dry weight after boiling-off from net weight. 2. To calculate the conditioned weight from boil-of and moisture regain it would be proper that the standard additional ratio is 44 per cent of dry weight after boiling-off. 3. Boil-of percent of the sizing sample skein used in the size test did not show a statistical significance comparing with the boil-off percent of sample skeins (24 skeins) which may represent that of a lot. To observe this result boil-off percent of the sizing sample skein may represent that of a lot. 4. In Korea if conditioned weight test substitute for test of boil-off and moisture regain, we make a profit of two billion won in a year at the current market-price.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.1
• /
• pp.25-30
• /
• 1996

The adsorption mechanism of Chromium(VI) uptake in silk fibroin fibers was discussed. The adsorption equilbrium of Chromium(VI) is significantly influenced by the initial adsorption rate and it showed 52% of the equilibrium uptake. The Chromium(VI) uptake by silk fibroin in increased with the acidic range of pH, which react upon Chromium(VI) oxidations. The enthalpy change in the Chromium(VI) on the temperatures, $\Delta$H, was found to be 39.7 KJ.mol-1, It means that the Chromium(VI) adsorption proceeds via a certain complex chemical reaction and the Chromium complex was found to be coordinated with carbonyl group of amides from the result of infrared spectra. The chroming of silk fibroin fibers in moderated in the conditions of 5$0^{\circ}C$, pH 2.4, and 3 hours, which prevent from the loss of physical properties. The equilibrium adsorption is attained at 5 X 10-3M of Chromium(VI) solutions.

• Korean Journal of Human Ecology
• /
• v.21 no.4
• /
• pp.791-803
• /
• 2012

This study intends to identify applicability of natural dye extracted from Aplysia kurodai, aiming to standardization of Aplysia kurodai natural dyeing through scientific validation by analyzing characteristics of pigment elements to review dyeability, colorfastness and antibacterial activity. Such material as silk fabrics that is animal fiber were used for this purpose, and derived following summarized results. UV/VIS spectrum analysis on the pigment of Aplysia kurodai that was extracted from purple gland showed that maximum absorbtion was near 540 nm. The silk fabric optimal dyeing can be achieved at a temperature of $55^{\circ}C$ with a colorant concentration of 5%. Dyed at $55^{\circ}C$ with interval of 10~90 minutes for identifying dye uptake over time to observed slow increase of dye uptake over time, and equilibrium occurred at 50 minutes. For dye uptake according to pH, while dye uptake was superior in acidity, it decreased rapidly in a base after pH 7. For color changes according to pH variation, it was reddish purple in acidity and was purplish red in a base. For color changes according to mordanting method, more clear color change had been obtained when process with aluminium pre-mordanting than non-mordanting and post-mordanting. The colorfastness to light, perspiration and washing was 1, 4~5, and 3~4 ratings respectively. The silk fabric dyed with Aplysia kurodai demonstrated excellent antimicrobial activity to Staphylococcus aureus and Klebsiella pneumoniae. The Aplysia kurodai can be used as a new colorant for the natural dyeing of silk.