• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.7
• /
• pp.631-635
• /
• 2006

The properties of metal interlayered DLC films between the Si substrate and the DLC films were studied. DC magnetron sputtering method has been used to deposit intermediate layers of metals. And RF-PECVD method has been employed to synthesize DLC onto substrates of the silicon and metal layers. After we used metal Inter-layers, such as chromium, nickel, titanium and we studied tribological properties of the DLC films. The thickness of films were observed by field emission scanning electron microscope (FE-SEM). Also the surface morphology of the films were observed by an atomic force microscope (AFM). The crystallographic properties of the films were analyzed with X-ray diffraction (XRD), the friction coefficients were investigated by AFM in friction force microscope (FFM) mode. Tribological performances of the films were estimated by nano-indenter, stress tester measurement.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.197-202
• /
• 1996

The highly oriented diamond particles were deposited on the mirror-polished (100) silicon substrates in the bell-jar type microwave plasma deposition system using a three-step process consisting if carburization, bias-enhanced nucleation and growth. By adjusting the geometry of the substrate and substrate holder, very dense disc-shaped plasma was formed over the substrate when the bias voltage was below -200V. Almsot perfectly oriented diamond films were obtained only in this dense disc-shaped plasma. From the results of the optical emission spectra of the dense disc-shaped plasma, it was found that the concentrations of atomic hydrogen and hydrocarbon radical were increased with negative bias voltage. It was also found that the highly oriented diamonds were deposited in the region, where the intensity ratios of carbonaceous species to atomic hydrogen are saturated.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.77-84
• /
• 1995

LCD용 다결정 실리콘 TFT의 제조에 요구되는 고품위의 다결정 실리콘 박막을 60미만의 저온 공정으로 제조하는 기술로 비정질 박막의 고상 결정화(solid phase crystallization) 가 유망하다. 본 연구에서는 고진공 화학증착기를 이용하여 증착된 비정질 실리콘 막의 고상결정거동에 대해 연구하였다. 고상 결정화 속도 및 결정화 후의 결정성(결정립 크기 및 결함 밀도) 화학증착시의 증착가스의 종류(SiH4 혹은 Si2H6), 공정 압력, 증착 온도 등에 민감한 영향을 받으며 Si2H6가스의 사용, 증착 압력의 증가, 증착온도의 감소는 최종 결정립의 크기를 현저히 증가시킨다. 또한 증착전의 기초 진공도를 높임으로써 반응기 잔류 가스에 의한 산소나 탄소 등의 막내 유입이 감소되어 결정화 속도가 증가하고 결정성이 향상되었다.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.217-219
• /
• 2011

As silicon devices shrink and their density increases, the low dielectric constant materials instead of $SiO_2$ film is required. SiOC film as low-k films was deposited by the capacitively coupled plasma chemical vapor deposition and then annealed at $300{\sim}500^{\circ}C$ to find out the properties of the dependence on the temperature and polarity. This study researched the dielectric constant using by the structure of the metal/SiOC film/p-Si, chemical shift, thickness, refractive index and hardness. The trend of reflective index was inverse proportioned the thickness, but the dielectric constant was proportioned it. The dielectric constant decreased with decreasing the thickness and the increment of the refractive index.

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.470-475
• /
• 1996

Fiber-textured diamond films have been deposited on scratched silicon(100) substrate by micro wave .plasma enhanced chemical vapor deposition at the condition of micro wave power : 950 W, pressure : 60 torr, H$_{2}$ gas flow rate : 50 sccm, CH$_{4}$ gas flow rate : 1.5 sccm, substrate temperature : about 900.deg. C and deposition time : 20 hours. The films were characterized by mean of scanning electron microscopy, Raman spectroscopy and X-ray analysis.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.856-857
• /
• 1998

Hydrogenated amorphous carbon nitride [a-C:H(N)] films were deposited on pretreated silicon(100) substrate in activated gas phase using. RF plasma-assisted CVD. We measured the FT-IR spectrum to investigate $C{\equiv}N$ stretching mode(nitrile), C-H stretching mode, C-H bending mode, C=C stretching mode C=N(imino) mode, and the EDX to investigate the ratio of N to C(0.25). By the results of FT-IR and EDX spectrum, We confirmed that hydrogenated amorphous carbon nitride films successfully were synthesized by RF-PACVD

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.1017-1019
• /
• 1998

In this paper, the fabrication of a micropump with two giant magnetostrictive films of Sm-Fe and Tb-Fe is presented. The pump consist of one silicon wafer and one cover glass. The micropump consists of an actuator diaphragm, a paired nozzle and diffuser, and two through holes. The Structure of the micropump is fabricated by the chemical vapor deposition, the etching and the sputtering of the magnetostrictive films. The deflection of the actuator measured diaphragm is measured by using the laser vibrometer and the flow rate of the micro pump is observed by using a video microscope.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.415-419
• /
• 2003

Carbon nanotubes were formed on silicon substrate using microwave plasma-enhanced chemical vapor deposition method. The possibility of carbon nanotubes formation was related to the thickness of nickel catalyst. The growth behavior of carbon nanotubes under the identical thickness of nickel catalyst was strongly dependent on the magnitude of the applied bias voltage. High negative bias voltage (-400 V) gave the vertically well-aligned carbon nanotubes. The vertically well-aligned carbon nanotubes have the multi-walled structure with nickel catalyst at the end position of the nanotubes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.34-41
• /
• 1993

Effect of high temperature annealing conditions on Ta$_{2}O_{5}$ thin films was investigated. Ta$_{2}O_{5}$ thin films were deposited on P-type silicon substrates by plasma-enhanced chemical vapor deposition (PECVD) using tantalum ethylate. Ta(C$_{2}H_{5}O)_{5}$, and nitrous oxide. N$_{2}$O. The microstructure changed from amorphous to polycrystalline above 700.deg. C annealing temperature. The refractive index, dielectric onstant and leakage current of the film increased as annealing temperature increased. However, annealing in oxygen ambient reduced leakage currents and dielectric constant due to the formation of interfacial SiO$_{2}$ layer. By optimizing annealing temperature and ambient, leakage current lower than 10$^{-8}$ A/cm$^{2}$ and maximum capacitance of 9 fF/${\mu}m^{2}$ could be obtained.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.56-61
• /
• 2003

Nanocrystalline hydrogenated silicon (nc-Si : H) thin films were deposited at room temperature by plasma enhanced chemical vapor deposition (PECVD): a mixture of SiH₄ and H₂ gas was introduced into the evacuated reaction chamber. When the H₂ gas flow rate was low, the density of Si-H₃ bonds was high in the films. On the other hand, when the H₂ gas flow rate was high, e.g., 100 sccm, a large number of Si-H bonds contributed to the passivation of the surface of the large volume of Si nanocrystallites. The relative fraction of the Si-H₃ and Si-H₂ bonds in the amorphous matrix varied sensitively with the H₂ gas flow rate. The variation was associated with the change in the intensity as well as the wavelength of the main PL peaks, indicating the change in the total volume as well as the size of the Si nanocrystallites in the films.