• The Korean Journal of Ceramics
• /
• 제6권3호
• /
• pp.193-200
• /
• 2000

Si$_3$N$_4$powder with 2 wt% $Al_2$O$_3$and 6 wt% $Y_2$O$_3$additives was sintered by the gas pressure sintering (GPS) technique. The unlubricated wear behavior depending on sintering conditions such as sintering temperature, pressure, and sintering time was investigated. When the sintering temperature and time increased, the larger elongated grains were formed and the microstructural heterogeneity increased. When sintering pressure increased, grain growth, however, was impeded. Also, the wear properties depended on microstructure and friction coefficient were related to grain size. Based on the experimental results, the wear properties were associated with initial friction coefficients as well as mechanical properties including fracture toughness and flexural strength.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.333-336
• /
• 2012

The study to give electrical conductivity by dispersing carbon nanotubes (CNT) into silicon nitride ($Si_3N_4$) ceramics has been carried out in recent years. However, the density and the strength of $Si_3N_4$ ceramics were degraded and CNTs disappeared after firing at high temperatures because CNTs prevent $Si_3N_4$ from densification and there is a possibility that CNTs react with $Si_3N_4$ or $SiO_2$. In order to suppress the reaction and the disappearance of CNTs, lower temperature densification is needed. In this study, $HfO_2$ and $TiO_2$ was added to $Si_3N_4-Y_2O_3-Al_2O_3$-AlN system to fabricate CNT-dispersed $Si_3N_4$ ceramics at lower temperatures. $HfO_2$ promotes the densification of $Si_3N_4$ and prevents CNT from disappearance. As a result, the sample by adding $HfO_2$ and $TiO_2$ fired at lower temperatures showed higher electrical conductivity and higher bending strength. It was also shown that the mechanical and electrical properties depended on the quantity of the added CNTs.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.893-899
• /
• 2004

Nitrided Pressureless Sintering(NPS) 공정에 의한 질화규소 세라믹스의 기계적 특성, 미세구조 및 열적 특성을 세 가지조성을 갖는 $Al_{2}O_3,\;Y_{2}O_3$ 소결조제의 변화에 따라 조사하였다. 또한 각 조성에서 금속 실리콘의 첨가량을 0, 5, 10, 15, 그리고 $20wt\%$로 변화를 주어 실리콘의 첨가효과를 조사하였다. $5wt\%\;Al_{2}O_3,\;5wt\%\;Y_{2}O_3$, 그리고 $5wt\%$ Si 조성에서 질화규소 소결체의 치밀화가 진행되었으며, 4점 꺽임강도와 상대밀도는 각각 500 MPa과 $98\%$를 나타내었다. 또한 상온에서 열팽창계수와 열전도도는 각각 $2.89{\times}10^{-6}/^{\circ}C$와 $28W/m^{\circ}C$를 나타내었으며, 20,000회의 열충격 싸이클을 반복한 후, 꺽임강도를 측정한 결과, 초기 500MPa의 강도를 유지하고 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.857-858
• /
• 2006

In order to clarify the wear resistance as cutting tools, the effect of oxygen addition on oxidation behavior of the ${\beta}-Si_3N_4$ ceramics with 5 mass% $Y_2O_3$ and 2 or 4 mass% $Al_2O_3$ was investigated by performing oxidation tests in air at $1300^{\circ}$ to $1400^{\circ}C$ and cutting performance tests. From test results, we could conclude that the mechanical properties of ${\beta}-Si_3N_4$ ceramics depending on oxygen introduction are much effective on cutting performance improvements of ${\beta}-Si_3N_4$ ceramics.

• 한국세라믹학회지
• /
• 제36권4호
• /
• pp.432-443
• /
• 1999

The self-toughened Si3N4 ceramics where needle-like coarse ${\beta}$-Si3N4 grains were dispersed within fine-grain-ed matrix were prepared via hot-prssing at 1730$^{\circ}C$ for 2 h using 5 vol% ${\beta}$-Si3N4 whiskers as a seed. In this study the microstructures and mechanical properties of self-toughened Si3N4 ceramics were investigated. The flexural strength of self-toughened Si3N4 ceramics was increased from 600-800 MPa of the Si3N4 monolith to 830-1025 MPa. The KIC was also increased from 4.0-5.0MPa$.$m1/2 of the Si3N4 monolith to 5.8-6.5MPa$.$m1/2$.$The needle-like coarse Si3N4 grains in self-toughened ceramics were considered to induce various toughening mechanisms including the crack deflection pull-out and bridging and to contribute to KIC improvement. In ad-dition to toughening mechanisms the KIC improvement was considered to be partially indebted also to the orien-tation of large ${\beta}$-Si3N4 grains and to the promoting effect of ${\beta}$-Si3N4 whiskers on the ${\alpha}$ to ${\beta}$ transtion.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.205-209
• /
• 2010

In the last (fourth) section, the discussion will entail a silicon-nitride/silicon-carbide nanocomposite, produced by pyrolysis of liquid polymer precursors, demonstrating one of the lowest creep rates reported so far in ceramics at the comparable temperature of $1400^{\circ}C$. This was first achieved by avoiding the oxynitride glass phase at the intergrain boundaries. One important factor in the processing of these nanocomposites was the use of the electrical field assisted sintering method.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.142-147
• /
• 1999

The interaction between commercial $Si_3N_4$ powder and two types of additives (nitrate and oxide additives) during the sintering of $Si_3N_4$ was investigated. The nitrates solution or oxide particles were added as a sintering additives. The surface of mixed powder was observed with FT-IR, TG, and HREM. DTA was used to characterize the reactivity of the powders. The formation of crystalline phases and phase transformation were analyzed by XRD. The adsorption of the additives on the surface of silicon nitride was confirmed in the nitrate salts. It was shown that the adsorption occurred by interaction between the amorphous $SiO_2$ layer on the $Si_3N_4$ surface and metal cations $(Al^{3++\; and \;Y^{3+})$ and anions $(NO_3\;^-\; or\; OH^-)$, resulting in a higher degree of homogeneous distribution of additives.

• 한국세라믹학회지
• /
• 제45권2호
• /
• pp.94-98
• /
• 2008

Silicon nitride($Si_3N_4)$ is one of the most widely used structural ceramic materials. However silicon nitride is difficult to sinter because of its strong covalent bonding characteristics. In this study, $Si_3N_4$ ceramics were fabricated by spark plasma sintering process with $Y_2O_3$ and $Al_2O_3$ addition to improve the sinterability and the mechanical properties and their phase transformation behavior, microstructure and mechanical properties were evaluated. Fully densified $Si_3N_4$ ceramics could be obtained by spark plasma sintering process at a lower temperature than conventional sintering method. The formation of network microstructure was affected by the addition of $Al_2O_3$ because it could accelerate a to ${\alpha}$ to ${\beta}$ phase transformation of $Si_3N_4$. As a result, the mechanical properties depended on amounts of $Al_2O_3$ addition. The hardness value increased with increasing ${\alpha}$-phase fraction, but fracture toughness value increase with increasing ${\beta}$-phase fraction.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.304-310
• /
• 1998

Carbothermal reduction has been one of the important processes for the production of ceramic raw materials such as silicon carbide, silicon nitride, boron carbide, etc. The process has also been one of several trials for the recovery of ZnO from ZnO-containing waste. It usually involves two consecutive steps: the evolution of Zn vapor and its oxidation with air. In this study a ZnO-containing raw material is reduced by carbon at $1250^{\circ}C$ and the evolved Zn vapor is oxidized with air, resulting in fine powders of ZnO. computer programs, THERMO and PYROSIM developed by MINTEK, are used to simulate the process thermodynamically and the results are compared with the experimental results. It is shown that the ZnO-containing raw material can be reduced and can form fine ZnO with the yield as high as 98.7% under a proper condition. Based on these results, a process is engineered for the production of ZnO in a rotary kiln at a rate of 3 tons/day. The produced ZnO powders show properties suitable to the usual applications in ceramic industries with a purity of > 95wt% and an average particle size of ∼3${\mu}m$.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.491-499
• /
• 1987

Silicon nitride powder synthesized from Kimcheon quartzite and commercial reagents, AlN and Y2O3 powders were used to prepare the partially and fully stabilized Y-${\alpha}$-Sialon ceramics by the pressureless sintering at 1800$^{\circ}C$ for 2 hours in N2 atmosphere. Good mechanical properties of the prepared Y-${\alpha}$-Sialon ceramics were found over 0.4∼0.6 of the Yttrium solubility range, X, in the equation Yx(Si12-4.5x, Al4.5x)(O1.5x, N16-1.5x). The properties of these prepared Y-${\alpha}$-Sialon ceramics were compared with those prepared in the same way from a commercial Toshiba Si3N4 powder.