• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권4호
• /
• pp.275-285
• /
• 2012

This paper presents a changes of luminescence property for converted white LEDs with the commercially available silicate phosphor. If silicate phosphor's quantity increase step by step. luminescence property will be changing. we analyze luminescence property for these change and carry out the high temperature aging test for 7,000 hours, the high temperature and humidity aging test for 7,000 hours for reliability. LED degradation not only results in reduced light output but also in color changes. so we monitor correlated color temperature (CCT), chromaticity coordinates(x, y) and spectrum intensity. Those results suggest that humidity factor more bad effect in color changes than temperature factor and Lighting quality is related with quantity of phosphor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1323-1326
• /
• 2005

The photoluminescence, electroluminescence and surface properties of ZnS:Cu,Cl phosphor coated by sol-gel process were studies. Na-silicate was used as precursor coating material. pH of solution and the concentration of Na-silicate are the important conditions to obtain the uniform coating on the phosphors. Also, the electroluminescent devices were made with Na-silicate coated phosphor. The spectroscopic characterization is performed by photospectrometer.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1020-1024
• /
• 2006

Europium$(Eu^{2+}\;or\;Eu^{3+})$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue, green, and even red light depending on the starting milterials and annealing conditions for synthesis. In addition, the structure was also changed when the different starting materials were used. When $CaCO_3$ was used as a starting material, tetragonal $Ca_2Al_2SiO_7$ was formed. However, pure green light was emitted when the annealing was conducted in reduced atmosphere and red one was emitted by annealing in air. In the case of $CaSiO_3$ as a starting material, triclinic $CaAl_2Si_2O_8$ was formed and only pure blue emission was observed. Moreover, this blue phosphor exhibited higher intensity than that of commercial YAG:Ce phosphor, which showed the possibility of application on the phosphor for new light source such as a UV-LED.

• 한국광학회지
• /
• 제24권2호
• /
• pp.64-70
• /
• 2013

본 논문에서는 청색 LED 칩에 YAG:Ce와 $(Sr,Ba)_2SiO_4:Eu$ 등 두 종류의 황색 형광체를 적용해서 제작한 백색 LED의 발광특성을 비교, 분석하였다. 두 백색 LED의 발광 스펙트럼의 특성을 분석하기 위한 수학적 함수 형태로써 Asymmetric double sigmoidal 함수를 적용할 수 있음을 확인하였고 이를 통해 발광 스펙트럼을 구성하는 피크들의 중심파장, 폭, 비대칭성에 대한 정보를 정량적으로 구해서 비교하였다. 분석 결과 실리케이트계 형광체의 발광 스펙트럼 폭이 YAG 형광체에 비해 더 좁아 연색지수의 측면에서 불리한 반면 구동전류에 따른 색도 안정성의 측면에서는 더 유리하다는 것을 확인하였다. 두 백색 LED의 발광효율은 구동전류의 증가에 따라 단조감소하였는데, 실리케이트 형광체 기반 LED의 발광효율이 YAG형광체 기반 LED에 비해 약 10~12 lm/W 정도 작음을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.214-220
• /
• 2013

본 연구에서는 실리케이트계 황색 형광체($Sr_2SiO_4:Eu^{2+}$)의 신뢰성 향상을 위하여 대기압 유전체장벽방전 플라즈마를 이용하여 hexamethyldisiloxane (HMDSO, $C_6H_{18}OSi_2$)을 형광체 분말에 코팅하였다. 플라즈마 코팅 후의 형광체 분말특성은 주사전자현미경(scanning electron microscope), 투과전자현미경(transmission electron microscope), 형광분광광도계(fluorescence spectrophotometer) 및 접촉각측정기(contact angle analyzer)를 이용하여 조사되었다. 형광체 분말의 플라즈마 코팅 후 접촉각이 $133.0^{\circ}$(물)와 $140.5^{\circ}$(글리세롤)로 증가하여 표면이 소수성으로 변화되었음을 확인하였으며, 광발광(photoluminescence)은 최대 7.8%의 향상을 나타냄을 알 수 있었다. 플라즈마 코팅 후 형광체 표면의 주사전자현미경 및 투과전자현미경 사진을 통해 낟알형상의 표면조직이 박막 코팅 층으로 덮여 있고, 코팅 층은 31~46 nm 가량의 두께로 형성되어 있음을 확인하였다. 발광다이오드(3528 1 칩 LED)에 형광체를 실장한 후 $85^{\circ}C$와 85% 상대습도에서 1,000시간 동안 신뢰성 테스트(85-85 Test)를 수행한 결과 코팅이 되지 않은 경우와 비교하여 코팅후의 형광체가 광도 저하율에서도 개선 효과를 보이는 것으로 나타났다. 본 연구의 유전체장벽방전 플라즈마 코팅 방법은 불규칙한 입자 형태의 형광체 분말 표면을 입체적으로 코팅하여 제품의 신뢰성을 향상시킬 수 있는 방법으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.324-329
• /
• 2018

Red phosphor in glasses (PiGs) for automotive light-emitting diode (LED) applications were fabricated with 620-nm $CaAlSiN_3:Eu^{2+}$ phosphor and Pb-free silicate glass. PiGs were synthesized and mounted on high-power blue LED to make a monochromatic red LED. PiGs were simple mixtures of red phosphor and transparent glass powder. After being fabricated with uniaxial press and CIP at 300 MPa for 20 min, the green bodies were thermally treated at $550^{\circ}C$ for 30 min to produce high dense PiGs. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30% phosphor had a full sintered density. Changes in photoluminescence spectra and color coordination were studied by varying the thickness of plates that were mounted after optical polishing. As a result of the optical spectrum and color coordinates, PiG plate with $210{\mu}m$ thickness showed a color purity of 99.7%. In order to evaluate the thermal stability, the thermal quenching characteristics were measured at temperatures of $30{\sim}150^{\circ}C$. The results showed that the red PIG plates were 30% more thermally stable compared to the AlGaInP red chip.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1559-1560
• /
• 2007

BGR mixture phosphor pumped by 400 nm is developed for white-light-emitting diode of liquid crystal display backlight. White-emitting phosphor is prepared by mixing $Ba_2SiO_4:Eu^{2+}$ and $(Ba,Sr)_3MgSi_2O_8:Eu^{2+},Mn^{2+}$ phosphors.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권2호
• /
• pp.117-127
• /
• 2013

In this paper, we studied the correlation between the activation energy($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy($E_a$) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The $T_j$ of Conditions and target specifics expressed $T_{j1}$, $T_{j2}$, $T_{j3}$. The activation energy ($E_a$) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy ($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy($E_a$) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1276-1278
• /
• 2009

A novel blue emitting $Ca_{1-x}Mg_2Si_3O_9:Eu_x$ phosphor was synthesized by the solid state reaction and its photoluminescence properties were optimized by controlling concentration of the activator contents and substituting concentration of Ca ion by Sr ion. The photoluminescence (PL) showed that this phosphor is efficiently excited by ultraviolet (UV)-visible light in the wavelength range from 200 to 410 nm. Also this phosphor emits intensely blue light with a broad peak at around 450 nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.32-35
• /
• 2006

For the white UV-LED applications, $Eu^{2+}$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue. green or blue-green light depending on the starting materials for synthesis. In addition, the structure was also changed when the different starting materials were used. When CaO and $CaCO_3$ was used as a starting material. tetragonal $Ca_2Al_2SiO_7$ was formed and blue-green and pure green light was emitted. respectively. However. in the case of $CaSiO_3$, triclinic $CaAl_2Si2O_8$ was formed and only pure blue emission was detected. The maximum emission intensity was obtained from $CaAl_2Si_2O_8:Eu^{2+}$ phosphors, which intensity was about 1.4 times higher than that of YAG:$Ce^{3+}$ phosphor used for blue LED.