• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2018

Purpose: This study investigated the effect of the augmented reality (AR)-based knee joint short period exercise program and used a motion analyzer with a 3D camera to determine the range of motion and dynamic balance and further investigate the effects of therapeutic exercise on patients. Methods: This study used AR-based motion analysis and a Y-balance test to measure the range of motion (ROM) of each joint: the hip joint and the knee joint. After the measurements, an exercise program was applied to the subjects, using the knee motion program function, and the muscles of the quadriceps femoris and the hamstring were stretched or strengthened. Results: Our results showed knee joint extension at the dominant hip joint flexion position. While there was no significant difference (p>.05) at this position, there were significant differences in the non-dominant hips, unbalanced knee joint flexion, and superior knee joint flexion (p<.05). The Y-balance test using the non-dominant leg supported by the dominant legs showed that the absolute reach was $69.70{\pm}7.06cm$ before the exercise, and the absolute reach after the exercise was $77.56{\pm}6.09cm$ (p<.05). Conclusions: There was a significant difference when the movement of the lower limbs supported the superior limbs, and a significant difference was found in the ROM when the non-dominant side supported the dominant side. Therefore, the AR-based exercise program improves the balance of the human body and the range of motion of the joints, and research that aims to improve patients abilities should continue.

• The Journal of Korean Physical Therapy
• /
• v.28 no.5
• /
• pp.279-285
• /
• 2016

Purpose: This study was conducted to investigate the effects of joint mobilization and kinesio taping on pain, range of motion and knee function in patients with knee osteoarthritis. Methods: Thirty subjects were selected and divided into three groups: group 1 was treated with joint mobilization, group 2 was treated with kinesio taping and group 3 was treated with joint mobilization and kinesio taping. Joint mobilization was performed for 20 minutes three times a week for a period of 4 weeks, after which tape was applied for the same period of time and it was not exceeded 24 hours. Pain, range of motion and knee function were then assessed to identify the effectiveness. A visual analog scale (VAS) was used for pain assessment, while active and passive range of motion (AROM, PROM) were assessed using smart phones application, and knee injury and osteoarthritis outcome score (KOOS) was used to assess knee function. Results: After intervention, the joint mobilization group and kinesio taping group showed significant improvements in VAS, AROM, PROM and KOOS (Symptom, Pain, ADL, QOL), whereas no significant difference was found in sport/recreation. The joint mobilization with kinesio taping group showed significant improvements in all items, and a significant increase was found in AROM and PROM compared to the other two groups. Conclusion: We found that joint mobilization and kinesio taping effectively improved pain, range of motion and knee function in patients with knee osteoarthritis, but that application of joint mobilization with kinesio taping was most effective.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.948-960
• /
• 2018

Many mobile sensing frameworks have been developed to help researcher doing their mobile sensing research. However, energy consumption is still an issue in the mobile sensing research, and the existing frameworks do not provide enough solution for solving the issue. We have surveyed several mobile sensing frameworks and carefully chose one framework to improve. We have designed an adaptive sampling module for a mobile sensing framework to help solve the energy consumption issue. However, in this study, we limit our design to an adaptive sampling module for the location and motion sensors. In our adaptive sampling module, we utilize the significant motion sensor to help the adaptive sampling. We experimented with two sampling strategies that utilized the significant motion sensor to achieve low-power consumption during the continuous sampling. The first strategy is to utilize the sensor naively only while the second one is to add the duty cycle to the naive approach. We show that both strategies achieve low energy consumption, but the one that is combined with the duty cycle achieves better result.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2023

The motion of small fishing vessels is significantly affected by small waves, leading to accidents, such as capsizing or sinking. This paper presents the results of two types of basin tests. The first test analyzed the characteristics of roll and pitch motions among regular waves with the same wave steepness using the drifting state of three (3G/T, 7G/T, 10G/T) small fishing vessels. The second test analyzed the motion characteristics of the 7G/T fishing vessel under different wave steepness. The first test showed that heave and roll motions are significant in the beam sea, while pitch motion is significant in the bow and stern seas. The second test shows that wave steepness has a linear relationship with roll and pitch motions in the bow and stern seas.

• Journal of International Academy of Physical Therapy Research
• /
• v.3 no.1
• /
• pp.364-369
• /
• 2012

The purpose of this study was to analyze lower limb muscle activity and 3D motion analysis according to change foot arch height during walking. We selected 9 young and healthy people who have been normal foot. And we selected 7 young and healthy people who have been flatfoot. So, people were divided into 2 groups and walked platform during 2 minutes twice for checked by 3D motion analysis. These data were characterized by EMG measurements of three muscles( tibialis anterior, medial and lateral gastrocnemius) while they were walking. The collected data were analyzed by Independent t test using the SPSS statistics program(Ver 12.0). In foot arch change, there were no significant difference in three muscles 3D motion analysis also found that there were no significant difference in joint angles. In this study was to analyze lower limb muscle activity and 3D motion analysis according to change foot arch, but there were no significant difference in 6 muscles neither joint angles.

• Physical Therapy Korea
• /
• v.10 no.1
• /
• pp.63-76
• /
• 2003

This research was performed to compare spinal segment motion angle between low back pain (LBP) group and painless group during trunk flexion-extension and to investigate the effect of transversus abdominis strengthening exercise on spinal segment motion angle in LBP group. Nine subjects with LBP and ten subjects without LBP participated. Transversus abdominis strengthening exercise was performed in LBP group for three weeks, and spinal segment motion angles were compared before and after the exercise performance. Spinal segment motion angles were measured both in sitting and standing position. Results were as followed: 1) Subjects' average age was 24.79 years, height was 167.84 cm, and weight was 59.95 kg. 2) Spinal segment motion angle of T10/l1 was significantly higher in LBP group compared with painless group (p<.05) in sitting position during trunk flexion-extension. 3) In sitting position, whereas entire lumbar segment motion angles were lower in LBP group compared with painless group (p<.05), angle of L4/5 was higher in LBP group compared with painless group (p<.05). 4) There was no significant difference in thoracic segment motion angle in standing position. 5) After three weeks of transversus abdominis strengthening exercise, thoracic segment motion angle increased both in sitting and standing position (p<.05). 6) In painless group, there was no significant difference in entire spinal segment motion angles in sitting and standing position (p>.05). When spinal segment motion angles were compared between sitting and standing position, there were slight differences. In sitting position, there was no difference in spinal segment motion angle between LBP group and painless group while hip joint motion angle and sacral inclination angle of LBP group was lower than those of painless group (p<.05). In standing position, lumbar segment motion angle was significantly lower in LBP group than that of painless group. Transversus abdominis strengthening exercise influenced thoracic segment motion angle more significantly than lumbar segment motion angle.

• The Journal of Korean Physical Therapy
• /
• v.27 no.2
• /
• pp.89-95
• /
• 2015

Purpose: The purpose of this study is to determine the effects of visual information on movement time and each angular velocity of trunk and lower extremity joints while healthy adults are in sitting and squat motion. Methods: Participants consisted of 20 healthy male and female adults; movement time and each angular velocity of trunk, pelvis, hip, knee and ankle of sitting and squat motion according to common vision, visual task and visual block were analyzed using a three dimensional motion analysis system. Results: Each angular velocity of the trunk, pelvis, hip, knee and ankle in phase 2 of the sitting showed significant difference according to the types of visual information (p<0.05). Movement time and each angular velocity of pelvis and hip in phase 2 of squat motion showed significant difference according to the types of visual information (p<0.05). According to the common vision, each angular velocity of knee and ankle in phase 1 was significantly fast in sitting (p<0.05). According to the common vision, each angular velocity of trunk, pelvis, hip, knee, and ankle in phase 2 was significantly fast in sitting (p<0.05). Conclusion: Visual information affects the angular velocity of the motion in a simple action such as sitting, and that in more complicated squat motion affects both the angular velocity and the movement time. In addition, according to the common vision, visual task and visual block, as angular velocities of all joints were faster in sitting than squat motion.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.61-71
• /
• 2006

The purpose of this study was to compare kinematic characteristics on the limbs at 3 different walking speed during the energy and the normal walking. Eight subjects performed energy walking and normal walking at the slow speed(65 beats/min), the normal speed(115beats/min), the fast speed(160 beats/min). The 3-d angle was calculated by vector projected with least squares solution with three-dimensional cinematography(Motion Analysis corporation). The range of motion was calculated on the trunk, shoulder, elbow, hip, knee joint. The results showed that stride length was no difference of the two walking pattern. The duration of support phase was also no difference of the two walking pattern. The range of motion of shoulder joint significantly increased in the sagittal and frontal planes, and the range of motion of elbow joint significantly increased as the energy walking. The range of motion of hip joint had no significant difference in the any planes in changing of walking speed. But the most remarkable difference of the two walking patterns revealed at the trunk. The range of flexion/extension angle had significant increasing $2.36^{\circ}$ at normal speed, and the range of the right/left flexion angle had significant increasing below $4^{\circ}$ at the 3 walking speed, and The range of rotation angle had significant increasing $7.35^{\circ}$, $9.22^{\circ}$, respectively at the normal and slow speed. But there was no significant difference of range of motion at the hip and knee joints between energy walking and normal walking.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.4
• /
• pp.333-340
• /
• 2013

Objective: The aim of this study is to provide a current knowledge of the multiple issues regarding motion effects on crew performance. Background: The motions of the ship may create motion sickness, nausea and vomit. Also, these motions also disturb the balance of crew members, increase the energy expenditure of crew for shipboard work, and result in increased levels of injury and fatigue. However, the motion effects of the ship on crew performance has not been thoroughly investigated. Method: Participants(N=10) were engaged in an experiment in 2 experimental environments(training ship and ship handling simulator) and 2 navigational conditions(day and night). The COP(Center of Pressure) data were recorded as an objective measure of postural balance control and the SSQ(Simulator Sickness Questionnaire) was used as a subjective measure of sickness. Results: The results showed that COP has a no significant difference based on experimental environments, but significant effect on SSQ. Conclusion: During the virtual simulator navigation, subjects showed significant SSQ level changes, which included decreased SSQ data. But, there is no significant difference of COP between training ship and ship handling simulator. Application: The results of this study could be applied to the next generation of ship design to decrease effect of motion at sea and to increase performance of ship crew.

• Journal of muscle and joint health
• /
• v.2 no.2
• /
• pp.147-159
• /
• 1995

Although there are many research studies on the effectiveness of heat and cold therapy for patients with arthritis at home or health care center, little attention has been paid to determining which therapy associates with season is effective for patients with chronic arthritis. The purpose of this study was to explore the effectiveness of heat and cold therapy associated with season for patients with arthritis. An experimental design using replications with intervention was employed. A total of 27 female arthritic patients were selected. Data were collected in summer and winter. Hot bag and ice bag were applied on each patient's knee for each 20 minutes alternatively. Joint pain, discomfort and range of motion were measured. Data were analyzed using paired t-test, and two-way ANOVA. The results of this study were ; 1. Joint pain Heat therapy was effective for pain relief, as compared with cold therapy. Heat therapy was more effective for pain relief in winter than in summer. Cold therapy was effective for pain relief, but there was no statistically significant difference of pain relief between summer and winter. 2. Discomfort Discomfort was decreased using heat therapy, whereas it was increased using cold therapy. Although discomfort was decreased using heat therapy in both summer and winter, there was no statistically significant difference of discomfort between summer and winter. Using cold therapy, discomfort was decreased in summer, but increased in winter. and season had effect on discomfort. 3. Range of motion Although there was no statistically significant difference between the range of motion for both heat and cold therapy, range of motion was Increased using both heat and cold therapy. In winter, range of motion was increased rather than in summer by using heat therapy. Using cold therapy, The range of motion was decreased in both summer and winter. There was no stastistically significant difference of range of motion between heat therapy and cold therapy. Furthermore, there was no statistically significant difference of range of motion between summer and winter. In conclusion, both heat and cold therapy were effective for pain relief, discomfort, and range of motion, especially heat therapy. Heat therapy was effective for pain relief, discomfort, and range of motion in winter, as compared with summer. Cold therapy, however, was effective for only pain relief in winter, The findings suggest the use of heat therapy for patients with arthritis especially in winter.