• 전자공학회논문지B
• /
• 제28B권5호
• /
• pp.369-381
• /
• 1991

In this paper, design algorithms for SMP(Single Mated Pair) and MMP (Multipli Mated Pair) structure of CCS (Common Channel Signaling) network are proposed through the study of the structure of CCS network. High reliability and fast messagy transfer time are the most important requirements for the CCS network. Based on it, three parameters such as monotraffic, reliability (maximum isolated SP(Signalling Point) number when any two STP(Signalling Transfer Points) fail and total network cost are defined. And the proposed algorithms different from preexisted algorithm that minimizes total network cost, maximize monotraffic with two constraints, reliability and total network cost. Comparing the experimental results of the proposed algorithms with those of the preexisted algorithm that minimizes total network cost, shows that the proposed algorithms produce a more reliable topology that has more monotraffic and a little higher total network cost. Additionaly, with the results of the proposed algorithms, SMP and MMP structures are compared.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1269-1274
• /
• 2011

To cut down the maintenance expenses at branch lines, the foreign developed countries have developed the low-cost signalling on low-density lines. These examples are FFB(FunkFahrBetrieb) Radio based train operation by German railways(Deutsche Bahn AG), ERTMS REGIONAL by Europe and LOCOPROL system using a GPS. Also, Korea is developing Information and Communication Technology based low-cost signalling on low-density lines. The characteristics of this system are directly controled switch and crossing by driver. For the purpose of this paper, we reviewed the business process for switch and crossing control. Specially, we compared and analysed both methods whether the driver takes control over the operation procedures of switch or the control message is carried by the command of the controller. And by utilizing the instrument of UML, I planned the switch according to the control authority and the operation procedures needed for the control of crossing.

• 한국통신학회논문지
• /
• 제39C권9호
• /
• pp.880-886
• /
• 2014

열차제어시스템은 최근의 컴퓨터 기술의 발달에 따른 자동화 및 지능화에 따라 소프트웨어에의 의존성이 더욱 증가하고 있으며, 동시에 소프트웨어의 오류 내재 가능성이 높아지고 실제 장애발생으로 인한 위험비용도 증가하고 있다. 이에 따라 열차제어시스템 소프트웨어의 무결성 검증이 매우 중요한 이슈가 되고 있으며, 이 중에서 열차제어 소프트웨어 기능안전성 검증을 위한 블랙박스 테스팅 도구의 필요성이 제기되고 있으나, 기존 상용도구들은 사용하기 어렵고 복잡하여 실제 현장에서 적용이 거의 되지 않고 있다. 본 논문에서는 이러한 분석을 바탕으로 열차제어시스템 소프트웨어 기능안전성 검증을 위한 실제 사용하고 있은 인터페이스를 통한 새로운 개념의 블랙박스 테스팅 도구를 제안하였다. 현재 제안한 도구의 설계 및 프로토타입이 개발되어 열차제어시스템 소프트웨어 테스팅에 시범적용 중에 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1060-1063
• /
• 2005

Growing qualitative and cost-based competition with the roads and air modes will be oblige the railways to make better use of their existing infrastructure than present. Development and use of new signalling and safety systems and introduction of wide-area control systems may make it possible to operate railway efficiently. Therefore. a comprehensive series of measures must be developed in the fields of technology, planning and management, measures which can operate today's korean railway systems intelligently and achieve cost savings, better quality services and improved results.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.37-44
• /
• 2009

AiPi technology incorporates an embedded clock and control scheme with a point-to-point bus topology, thereby having the smallest possible number of interface lines between a timing controller and column drivers. A point-to-point architecture boosts the data rate and reduces the number of interface lines, because impedance matching can be easily achieved. An embedded clock and control scheme is implemented by means of multi-level signalling, which results in a simple clock/data recovery circuitry. A 46" AiPi-based 10-bit FHD prototype requires only 20 interface lines, compared to 38 lines for mini-LVDS. The measured maximum data rate per data pair is more than 800 Mbps.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1297-1302
• /
• 2004

CBTC(Communication Based Train Control) System has many superior train control performances than conventional track-circuit-based train control system with higher train operation efficiency, and less installation and maintenance cost. It is expected that CBTC will replace the conventional train control systems in near future. As CBTC has different mechanisms from conventional track-circuit-based train control systems in identifying train positions, and communicating information between train and ground facility, we have to pay a earful attention to making the interface between CBTC equipments and other signalling devices. This paper provides the construction of the interface between CBTC equipment and other signalling equipments such as TTC(Total traffic Control) system. ATO. electronic interlocking devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.814-817
• /
• 2003

Assuming that life of urban transit signalling is about 20 years with the flow of technology development, Seoul urban transit will be required to prepare for improvement soon. The highly developed countries preceding several levels rather than Korea are faced with commercial service which uses RF, ATC and ATO in Train Control System. European highly developed countries in the field of railroad have been progressing standardization and technology development of signalling associated with related manufacturers for direct operation between nations. For that, a effective train control system with radio beyond control levels by the existing wayside-onboard communication is in a developed and used stage. The systems which advanced countries have been progressing seem to be applied to domestic within 5 years from now. At present, there are no countries using CBTC for service throughout the world. So, this is investigated to focus on the routes ready to be installed with completed CBTC and trying to introduce the technology. Especially, considerations for economic aspect are mainly reviewed about controlling ability of headway, flexibility, extension aspect and construction cost on the basis of paper examined in NYCT.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.937-942
• /
• 2002

As the subway composed of rolling stock, power supply, signalling, infrastructure is complex system, the optimization through standardization is one of the most effective way to reduce the cost of construction and operation. However, the subway in Korea has been built and operated in different kinds of system. In this paper, review for standardization of urban transit in Korea is executed and presented direction to standardization.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.98-103
• /
• 2003

Recently, to solve the urban transportation problem, the introduction of Light Rail Transit system has been proceeded positively. therefore, development of the Korean standard LRT system in which safety, efficiency and cost effectiveness are emphasized. The Korea Railroad Research institute study on Rubber Tired AGT system of Light Rail Transit to obtain the essential technology and engineering know-how, which leads lower LRT construction cost. In the development procedure, SE(system Engineering) is needed for combination of subsystem and optimum operation effect. This study is focused on the interface of LRT subsystem(Development of the rubber tired LRT, Power supply system, signalling and train control system, Elevated track structure for the rubber tired LRT), a important part of SE, to develop of the driverless LRT system and establish the test and evaluation.

• 정보처리학회논문지C
• /
• 제19C권3호
• /
• pp.191-208
• /
• 2012

PMIPv6(Proxy Mobile IPv6)는 MN(Mobile Node)의 이동성을 지원하기 위한 망 기반의 이동성관리 기술이다. PMIPv6의 구성 요소는 네트워크 기반 이동성 지원 프로토콜로서 도메인을 관리하는 LMA(Local Mobility Anchor)와 MN의 이동을 감지하고 MN의 위치 정보를 등록하는 MAG(Mobile Access Gateway) 그리고 MN으로 구성되어 있다. PMIPv6는 LMA와 MAG 사이의 터널을 형성하고 패킷이 LMA를 통하여 전달되도록 설계하여, LMA 병목현상 및 종단 간 지연이 증가하는 문제점이 있다. 이러한 문제점을 해결하기 위해 경로 최적화 수행 가능 감지, 경로 최적화 절차 등의 많은 연구가 진행되고 있으나 추가적인 시그널링으로 인한 오버헤드가 증가하고 다중 LMA 환경에 적용하기에 어려움이 있다. 따라서 본 논문에서는 다중 LMA 환경을 고려한 PMIPv6 기반의 향상된 경로 최적화 방안을 제안한다. PMIPv6 도메인의 모든 LMA는 PIG(Proxy Internetworking Gateway)에 연결되어 PMIPv6 도메인 간 분산 이동성 제어를 수행한다. PMIPv6 도메인 내 모든 LMA의 정보를 MAG가 유지하도록 하여 신속하게 경로 최적화를 수행하도록 하였으며, LMA에 경로 최적화 상태 정보를 PIG로부터 수신 받아 저장하여 추가적인 시그널링없이 경로 최적화를 지원하도록 한다.