• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 춘계학술발표대회 개요집
• /
• pp.65-67
• /
• 2002

The gas metal arc welding(GMAW) is regarded as one of the best candidate for welding automation in industrial joining application. It is important to monitor the weld quality for the high performance of weld automation. The measured analog signal is frequency analyzed by digital signal process method. In order to observe the welding phenomena and control welding condition, arc light, voltage, and current are measured at the same time. They are analyzed and compared with arc sound. for these experiments, a power source of constant voltage characteristics was used in the pure metal transfer mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1140-1141
• /
• 2007

A method of modeling the Smart Power IC is presented in this paper, which is based on the IC's typical operation characteristics and small signal frequency response data. Using the least square identification, the IC's dynamic mathematical model, which is expressed as transfer function, can be synthesized from the experimentally obtained gain and phase data. The practicability and effectiveness of the method are verified by means of experiments.

• 한국광학회지
• /
• 제31권2호
• /
• pp.59-70
• /
• 2020

3차원 플래시 라이다 시스템(3D flash LIDAR system)에서의 대기 산란을 해석하기 위해 몬테 카를로 복사 전달(Monte Carlo radiative transfer, MCRT) 방법을 바탕으로 수정된 수치 해석 모델인 MCRT 행렬 방법을 논의한다. MCRT 방법을 바탕으로 라이다 신호의 복사 전달 함수를 행렬 형태로 구성하며, 이는 특성 응답에 해당한다. 근축 근사에 기반하여 본 특성 응답 행렬의 중첩 및 합성곱 연산을 활용함으로써 확장된 전반적인 플래시 라이다의 전산 모사 모델을 개발한다. MCRT 행렬 방법은 기존의 몬테 카를로 기반 방법들에서 과도하게 증가할 수 있는 개별 라이다 신호의 추적을 대폭 경감시킨다. 그 결과 본 방법은 다양한 산란 조건 및 라이다 시스템 구성 환경에서도 그 신호 응답을 빠르게 획득할 수 있는 특징을 지닌다. 본 논문에서는 MCRT 행렬 방법에 기반한 전산 모델을 이용하여 상이한 대기 환경 조건에서 동작하는 3차원 플래시 라이다 시스템을 그 산란 조건, 즉, 그 가시거리에 따른 산란 계수를 달리하며 모사하고, 플래시 라이다 신호의 신호대잡음비의 악화, 신호 오류, 시공간적 확산 및 시간 지연 등 시스템상에서의 산란 효과에 의해 나타나는 다양한 현상을 수치적으로 분석한다. MCRT 행렬 방법은 자율 주행을 위한 플래시 라이다 시스템을 포함해 다양한 라이다 시스템을 분석하는데 매우 효과적으로 사용될 수 있을 것으로 기대된다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권5호
• /
• pp.222-227
• /
• 2002

Recently, the research on artificial retina for the blind is active. In this paper a new optical link method for the retinal prosthesis is proposed. Laser diode system was chosen to transfer image into the eye in this project and the new optical system was designed and evaluated. The use of laser diode array in artificial retina system makes system simple for lack of signal processing part inside of the eyeball. Designed optical system is enough to focus laser diode array on photodiode array in 20$\times$20 application.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.593-596
• /
• 1994

When a force impulse acting on a massive and plex object is measured with a dynamometer, be resonant vibration of the measurement system often leads to serious inaccuracies. A more accurate measurement is obtained when the transfer function ,of the object-dynamometer system is used to compensate for the error in the dynamometer's output signal. The natural frequency and the damping coefficient of the transfer function are estimated by analyzing the waveform of the free damped vibration period after the loading of the force has ended. The residue of the system is determined such that the compensated force spectrum becomes smooth within a neighborhood of the natural frequency. The effectiveness of this signal processing method is experimentally tested on a hammer impulse, under the assumption that the hammer's high resonant frequency accurately models the problems encountered in force impact measurement. The compensation method is used to derive a improved estimate of the hammer impulse.

• 한국음향학회지
• /
• 제33권1호
• /
• pp.54-59
• /
• 2014

본 논문은 비정상 (nonstationary)특성을 가지는 잡음환경에서 마이크간 전달함수 비 (RTF, Relative Transfer Function) 추정 알고리즘을 제안한다. 음성을 이용한 다양한 기기에 다중 마이크를 이용한 잡음제거 기술은 널리 사용되며, 이때 각 마이크간의 입력 신호 사이의 관계는 필수적으로 추정되어야 한다. 본 논문에서는 기존의 OM-LSA(Optimally-Modified Log-Spectral Amplitude)기반의 추정 방식에 CASA (Computational Auditory Scene Analysis)를 접목시킨 방식을 제안한다. 제안한 방법의 성능 검증을 위하여 비정상 백색 잡음 (nonstationary white Gaussian noise) 환경에서 10명 화자 발음을 이용한 마이크간 전달함수 비 추정 성능 평가 실험을 수행하였다. 잡음 신호가 초당 8dB 증감하는 환경에서 SBF (Signal Blocking Factor)가 평균 2.65dB 개선됨을 확인하였다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.404-406
• /
• 2002

We have investigated the contribution of the scattered x rays to the signal imaging in the radiographs acquired with anti-scatter grids of several grid ratios by separating the line spread functions (LSFs) derived from the signal edge image into the primary and the scatter components. By using a 1.0-mm lead plate in the scattering material, the blurred signal edge images were acquired by use of an imaging plate at a tube voltage of 80 kV with the anti-scatter grids of grid ratios for 5:1, 6:1, 8:1, 10:1 and 12:1. The edge profiles of the signal images were scanned and those in relative exposure were differentiated to obtain the LSFs. To investigate the contribution of the scattered x rays to the signal imaging, we proposed a method for separating the LSFs derived from the signal images into the primary and the scatter components, where the scatter component was approximated with exponential function. Our basic approach is to separate the area of the LSFs by ratios of the scattered x-ray exposure to the primary x-ray exposure, which were obtained for the grid ratios by use of a lead disk method. The LSFs and the two components were Fourier transformed to obtain the modulation transfer functions (MTFs) and their two components. As the result, we found that, by using the anti-scatter grids, the scattered x rays were reduced, but the shape of the LSFs of the scatter component hardly changed. The contributions of the scatter component to the MTFs were not negligible (more than 10 %) for spatial frequencies lower than about 1.0 mm$\^$-l/ and that was greater as the grid ratio decreasing. On the other hand, for higher frequencies, the primary component was dominant compared with the scatter component.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.962-977
• /
• 2019

The human voice is a convenient method of information transfer between different objects such as between men, men and machine, between machines. The development of information and communication technology, the voice has been able to transfer farther than before. The way to communicate, it is to convert the voice to another form, transmit it, and then reconvert it back to sound. In such a communication process, a vocoder is a method of converting and re-converting a voice and sound. The CELP (Code-Excited Linear Prediction) type vocoder, one of the voice codecs, is adapted as a standard codec since it provides high quality sound even though its transmission speed is relatively low. The EVRC (Enhanced Variable Rate CODEC) and QCELP (Qualcomm Code-Excited Linear Prediction), variable bit rate vocoders, are used for mobile phones in 3G environment. For the real-time implementation of a vocoder, the reduction of sound quality is a typical problem. To improve the sound quality, that is important to know the size and shape of noise. In the existing sound quality improvement method, the voice activated is detected or used, or statistical methods are used by the large mount of data. However, there is a disadvantage in that no noise can be detected, when there is a continuous signal or when a change in noise is large.This paper focused on finding a better way to decrease the reduction of sound quality in lower bit transmission environments. Based on simulation results, this study proposed a preprocessor application that estimates the SNR (Signal to Noise Ratio) using the spectral SNR estimation method. The SNR estimation method adopted the IMBE (Improved Multi-Band Excitation) instead of using the SNR, which is a continuous speech signal. Finally, this application improves the quality of the vocoder by enhancing sound quality adaptively.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.22-25
• /
• 2005

In this research, a wafar-level transfer method of cantilever array on a conventional CMOS circuit has been developed for high density probe-based data storage. The transferred cantilevers were silicon nitride ($Si_3N_4$) cantilevers integrated with poly silicon heaters and piezoelectric sensors, called thermo-piezoelectric $Si_3N_4$ cantilevers. In this process, we did not use a SOI wafer but a conventional p-type wafer for the fabrication of the thermo-piezoelectric $Si_3N_4$ cantilever arrays. Furthermore, we have developed a very simple transfer process, requiring only one step of cantilever transfer process for the integration of the CMOS wafer and cantilevers. Using this process, we have fabricated a single thermo-piezoelectric $Si_3N_4$ cantilever, and recorded 65nm data bits on a PMMA film and confirmed a charge signal at 5nm of cantilever deflection. And we have successfully applied this method to transfer 34 by 34 thermo-piezoelectric $Si_3N_4$ cantilever arrays on a CMOS wafer. We obtained reading signals from one of the cantilevers.

• 한국통신학회논문지
• /
• 제30권12C호
• /
• pp.1214-1221
• /
• 2005

본 논문에서는 DCT 평면에서 modulation transfer function (MTF)을 사용한 정지영상 워터마킹 방법을 제안하였다. 정지영상에 삽입된 워터마크의 가시성을 줄이기 위하여 인간의 시각적 특성을 나타내는 MTF를 사용하였다. 제안한 워터마킹 방법이 lowpass filtering 및 cropping 등의 공격에 강인한 특성을 나타내었다. 공간평면과 DCT 평면 사이의 에너지 상관관계를 이용하여 DCT 평면에서 삽입될 워터마크의 길이와 공간 평면에서 원하는 peak signal to noise ratio (PSNR)가 주어졌을 때 DCT 평면에서 워터마크 weighting factor를 구하는 식을 유도하였으며, 원하는 PSNR과 공간평면 및 DCT 평면에서 계산된 PSNR이 본 실험에서 사용한 7가지 영상에 대하여 최대 0.07dB이내로 오차를 나타내었다.