• ETRI Journal
• /
• v.22 no.2
• /
• pp.11-19
• /
• 2000

If the right and left signals of a binaural sound recording are reproduced through loudspeakers instead of a headphone, they are inevitably mixed during their transmission to the ears of the listener. This degrades the desired realism in the sound reproduction system, which is commonly called 'cross-talk.' A 'cross-talk canceler' that filters binaural signals before they are sent to the sound sources is needed to prevent cross-talk. A cross-talk canceler equalizes the resulting sound around the listener's ears as if the original binaural signal sound is reproduced next to the ears of listener. A cross-talk canceler is also a solution to the problem-how binaural sound is distributed to more than 2 channels that drive sound sources. This paper presents an effective way of building a cross-talk canceler in which geometric information, including locations of the listener and multiple loudspeakers, is divided into angular information and distance information. The presented method makes a database in an off-line way using an adaptive filtering technique and Head Related Transfer Functions. Though the database is mainly concerned about the situation where loudspeakers are located on a standard radius from the listener, it can be used for general radius cases after a distance compensation process, which requires a small amount of computation. Issues related to inverting a system to build a cross-talk canceler are discussed and numerical results explaining the preferred configuration of a sound reproduction system for stereo loudspeakers are presented.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.1 s.94
• /
• pp.29-38
• /
• 2005

The track pull-in behavior analysis in an optical disk drive (ODD) using plane phase and the evaluations for effecting parameters of it are discussed. Track pull-in, track capture procedure to do track following control, is a key factor to increase data transfer rate. First, the relative velocity between the beam spot of an optical pick-up and the target track of an optical disk is analyzed during the track pull-in procedure. In this process, it is showed that the track error signal has nonlinear characteristics which are depending on the time. Second, Runge-Kutta method to solve the nonlinear equation is applied to find the track pull-in behavior, and some optimal parameters to get stable and fast pull-in condition are obtained. Then, the phase plane analysis for track pull-in procedure is presented. Finally, some comments for the simulated results are discussed briefly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.3
• /
• pp.280-289
• /
• 2008

This paper presents design of the quantitative feedback control system of the three axes hydraulic road simulator with respect to the dummy wheel for uncertain multiple input-output(MIMO) feedback systems. This simulator has the uncertain parameters such as fluid compressibility, fluid leakage, electrical servo components and nonlinear mechanical connections. This works have reproduced the random input signal to implement the real road vibration's data in the lab. The replaced $m^2$ MISO equivalent control systems satisfied the design specifications of the original $m^*m$ MIMO control system and developed the mathematical method using quantitative feedback theory based on schauder's fixed point theorem. This control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) having the minimum bandwidth for parameters of uncertain plant. The efficacy of the designed controller is verified through the dynamic simulation with combined hydraulic model and Adams simulator model. The Matlab simulation results to connect with Adams simulator model show that the proposed control technique works well under uncertain hydraulic plant system. The designed control system has satisfied robust performance with stability bounds, tracking bounds and disturbance. The Hydraulic road simulator consists of the specimen, hydraulic pump, servo valve, hydraulic actuator and its control equipments

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.293-297
• /
• 1997

Using trace etching method in this study, we measure the energy of argon ions generated in VEBA System which is composed of Marx Generater and Pulse Forming Line. In this system the electron beam of 240 kV, 30 kA, 60 ns is generated. Argon ions are formed through the electron beam ionization of a gas cloud injected by a fast puff valve. Thus argon ions are accelerated into vacuum drift tube by a virtual cathode and seperated with electron beam, consequently, they heat the trace etching plates made of aluminum thin films. The energy of argon ions are determined by the number of aluminum thin films penetrated by the ions. This experimental value corresponds with the theoretical value.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.3
• /
• pp.372-378
• /
• 2016

Clutch torque control is the key to the ride comfort improvement of a vehicle equipped with AMT (automated manual transmission). For such control, the torque transfer starting point, known as the "kiss point," should be indicated or at least estimated to compensate for the clutch torque. The kiss point changes due to wear, high temperature, and fatigue; as such, it should be estimated while the vehicle is being driven. In this study, the method of kiss point active estimation for an AMT vehicle with a dry-type clutch was devised. The kiss point is learned while the engine is in an idle state and while the transmission is at a neutral gear position. It is determined when the input shaft of the transmission starts to rotate by slowly engaging the clutch. The noise of the shaft speed signal during the slow engagement process is filtered for accurate control. The kiss point estimation at various clutch engagement speeds was analyzed via a vehicle test.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.6
• /
• pp.989-996
• /
• 2008

Recently, a few types of fish-cage in open sea are researched. This fish-cage has to operate monitoring system for keeping an optimum living condition for fish. The most efficient monitoring system is WVMS(Wireless Vision Monitoring System) for fish-cage in open sea. WVMS should be able to transmit video signal and communicate with each controller. So. it needs to be based on WLAN(Wireless LAN) which has characteristic of higher transfer-rate, In this paper, we propose a structure of WVMS using WLAN equipments for maritime environment and prove its effectiveness. We present the propagation loss model of WVMS's communication channel. measured by field test, and discuss its validity compared with the predictive value based on the Friss propagation model and Plane earth reflection model. We present the number of frames that is received from WLAN modem connecting with underwater-camera in field test spots. As a result, we confirmed that proposed WVMS is suitable for maritime environment and it is possible to be applied to fish-cage in open sea on 'seogwipo'.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.124-131
• /
• 2003

In this paper, we propose a Progressive scalable video coding algorithm using frequency weighting in the DCT domain. Since the human visual system (HVS) can be modeled as a nonlinear point transformation, called the modulation transfer function (MTF), we tan use the frequency weighting matrix to enhance the video image quality. We change this frequency weighting matrix into the frequency shift matrix to apply to the bit-plane coding method for the fine granular scalable (FGS) video coding We also define a new error metric JNDE (just noticeable difference) to measure the perceptual image quality in terms of human vision.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.199-205
• /
• 2004

This paper describes the fault diagnosis method to order to construct CIM in complex system with hierarchical structure similar to human body structure. Complex system is divided into unit, item and component. For diagnosing this hierarchical complex system, it is necessary to implement a special neural network. Fault diagnosis system can forecast faults in a system and decide from the signal information of current machine state. Comparing with other diagnosis system for a single fault, the developed system deals with multiple fault diagnosis, comprising hierarchical neural network (HNN). HNN consists of four level neural network, i.e. first is fault symptom classification and second fault diagnosis for item, third is symptom classification and forth fault diagnosis for component. UNIX IPC is used for implementing HNN with multitasking and message transfer between processes in SUN workstation with X-Windows (Motif). We tested HNN at four units, seven items per unit, seven components per item in a complex system. Each one neural network represents a separate process in UNIX operating system, information exchanging and cooperating between each neural network was done by message queue.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.74.2-74.2
• /
• 2016

It is important to know how well observation errors are removed in the calibration process prior to ensuing scientific research. In mm-VLBI observations, a radio wave suffers from an atmospheric propagation delay due to the rapid change of atmospheric refraction. It makes phases of VLBI correlation output fluctuate rapidly, which essentially decreases the coherence of phases and reduces the integration time. Consequently, it is challenging to achieve a high signal-to-noise ratio and enhance the quality of scientific output. Among the causes of the atmospheric propagation delay, water vapor in the troposphere is the most decisive factor to affect phase errors in the high frequency range (> 10GHz). It is expected to have the non-dispersive characteristic that enables to introduce new calibration strategy, Frequency Phase Transfer (FPT). This new method utilizes low frequency phases to compensate phase errors in high frequency bands. In addition, Korean VLBI Network (KVN) which benefits from the simultaneous 4-channels (22/43/86/129 GHz) observations is ideal to probe FPT performance. In order to evaluate FPT performance of KVN, we present the results of FPT phase analysis and discuss its performance.

• Journal of the Korean Magnetics Society
• /
• v.22 no.4
• /
• pp.136-141
• /
• 2012

In the this research, two simultaneous peaks of radial artery pulse wave and ECG pulse wave measured by using clip-type pulsimeter and ECG were investigated in order to analyze pulse wave velocity. The measured value of a pulse wave velocity is about 5~7 m/s, it is proved one new method to measure an exact value of pulse wave velocity more than the typical biomedical signal monitoring system. This result implies that data measured by the oriental medical diagnosis apparatus as pulsimeter is clinically used in future.