• 전기의세계
• /
• v.22 no.1
• /
• pp.35-41
• /
• 1973

An automatic point traffic control method is recommended for more idealistic traffic flow over coarse road netowrks. The automatic control apparatus recommended, consists of a transceiver, amplifier, digital-to-analog converter, signal light controller for emergency and steady state, and digital counter as monitor. The transmitter sends a signal to the target vy means of Microwave-FM-CW and a diode detector picks up the echo signal. Thus the operation of the entire system will be carried out through an open loop state. Some factors necessary for an ideal detector system are rapid response, longevity and stability. An analytical method of the Doppler effect substitutes the conventional frequency deviation into the amplitude of detector output. The changing rate of amplitude is proportional to the voltage of the detector output. Some induced formula from Maxwell's radiation field theory ensures this new method, and, new method, and proves the fact with an experimental data presentation. Stability depends upon Klystron as an oscillator and a diode as a detector. the transceiver installation affects on the response and sensitivity of the system. In accordance with the detector output, several targets are easily classified by amplitudes on the scope. The traffic flow, i.e., target movement which is analyzed by the amplitude method, is shown through the scope and indicates it on the digital counter. The best efficiency for the amplitude analysis can be attained through use of an antenna having the highest sensitivity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.505-508
• /
• 2014

Transmission error (TE) is defined as "the angular difference between the ideal output shaft position and actual position". As TE is one of the major source of the noise and vibration of gears, it is originally studied with relation of the noise and vibration of the gears. However, recently, with the relation of mesh stiffness, TE has been studied for fault detection of spur gear sets. This paper presents a physics-based theory on fault diagnostics of a planetary gear using transmission error. After constructing the lumped parameter model using DAFUL, multi-body dynamics software, we developed a methodology to diagnose the faults of the planetary gear including phase calculation, signal processing. Using developed methodology, we could conclude that TE could be a good signal for fault diagnostics of a planetary gear.

• The Journal of Korea Robotics Society
• /
• v.6 no.4
• /
• pp.334-343
• /
• 2011

This paper presents a new approach for mobile robot heading detection using MEMS Gyro north finding method in the indoor environment. Based on this, the robot heading angle measurement scheme is proposed; improved north finding theory and algorithm are also explained. Several approaches are applied to confirm system's precision and effectiveness. In order to find out the heading angle, a single axis MEMS gyroscope to sense the angle between the robot heading direction and the north is used. To reach enough estimation accuracy and reduce detection time, the least square method (LSM) for the signal fitting and parameter estimation is applied. Through a turn-table, we setup a carouseling system to decrease the substantial bias effect on gyroscope's heading angle. For the evaluation of the proposed method, this system is implemented to the Pioneer robot platform. The performance and heading error are analyzed after the test. From the simulation and experimental results, system's accuracy, usefulness and adaptability are shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.221-230
• /
• 2002

This paper presents a new moving object segmentation algorithm using markov random field. The algorithm is based on signal detection theory. That is to say, motion of moving object is decided by binary decision rule, and false decision is corrected by markov random field model. The procedure toward complete segmentation consists of two steps: motion detection and object segmentation. First, motion detection decides the presence of motion on velocity vector by binary decision rule. And velocity vector is generated by optical flow. Second, object segmentation cancels noise by Bayes rule. Experimental results demonstrate the efficiency of the presented method.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.806-816
• /
• 2022

Purpose: In this study, the luminance measurement analysis results of the smoke generation state are considered for visual signal display light color for real-time escape guidance in the underground common area. Method: We will analyze the scattering characteristics of light in the atmosphere and optical technology based on the visibility theory, and try to classify the elemental technology as a guidance function through a prototype of a visual signal display device for evacuation guidance. Result: In the experiment conducted under the smoke-generating condition, the results were derived with low luminance ratio and good visibility in the order of red, green, and yellow. However, this result is different from general lighting in which color rendering is considered, and is limited to signals for signals and detection. Conclusion: A conclusions were drawn by reflecting both the luminance measurement results in the smoke generation situation and the preference survey results conducted in previous studies for the light color of the visual signal for signal and detection. When events such as smoke occur, it is better to use the escape guidance visual signal in red or green.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.1-14
• /
• 2014

The expansion of the physical road in response to changes in social conditions and policy of the country has reached the limit. In order to alleviate congestion on the existing road to reconsider the effectiveness of this method should be asking. Currently, how to collect traffic information for management of the intersection is limited to point detection systems. Intelligent Transport Systems (ITS) was the traffic information collection system of point detection method such as through video and loop detector in the past. However, intelligent transportation systems of the next generation(C-ITS) has evolved rapidly in real time interval detection system of collecting various systems between the pedestrian, road, and car. Therefore, this study is designed to evaluate the development of an algorithm for queue length based real-time traffic signal control methodology. Four coordinates estimate on time-space diagram using the travel time each individual vehicle collected via the interval detector. Using the coordinate value estimated during the cycle for estimating the velocity of the shock wave the queue is created. Using the queue length is estimated, and determine the signal timing the total queue length is minimized at intersection. Therefore, in this study, it was confirmed that the calculation of the signal timing of the intersection queue is minimized.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.4
• /
• pp.103-117
• /
• 2008

The polygraph test administered by the Korean Prosecutors Office for crime investigations customarily uses the score of -12 as the cutoff point separating the subjects who lie from those who tell the truth. The criterion used by the KPO is different from the one (-13) suggested by Backster (1963) who invented the particular method for lie detection. Based on the signal detection theory applied to the real polygraph test data obtained from real crime suspects by the KPO, the present study identified the score of -8 as an optimal criterion resulting in the highest overall accuracy of the polygraph test. The classification of the subjects with the score of -8 as the criterion resulted in the highest accuracy (83.17%) compared with the accuracies of classifications with the Backster's criterion (76.24%) and the KPO's criterion (80.20%). However, the new criterion was also found to result in more false-positive cases. Based on the results from the present study, it was recommended to use the score of -8 as the criterion when the overall accuracy is important but the score of -12 or -13 when avoiding false-positive is more important than securing the overall accuracy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.566-575
• /
• 2010

In recent, artificial immune system has become an important research direction in the anomaly detection of networks. The conventional artificial immune systems are usually based on the negative selection that is one of the computational models of self/nonself discrimination. A main problem with self and non-self discrimination is the determination of the frontier between self and non-self. It causes false positive and false negative which are wrong detections. Therefore, additional functions are needed in order to detect potential anomaly while identifying abnormal behavior from analogous symptoms. In this paper, we design novel network attack detection and response schemes based on artificial immune system, and evaluate the performance of the proposed schemes. We firstly generate detector set and design detection and response modules through adopting the interaction between dendritic cells and T-cells. With the sequence of buffer occupancy, a set of detectors is generated by negative selection. The detection module detects the network anomaly with a set of detectors and generates alarm signal to the response module. In order to reduce wrong detections, we also utilize the fuzzy number theory that infers the degree of threat. The degree of threat is calculated by monitoring the number of alarm signals and the intensity of alarm occurrence. The response module sends the control signal to attackers to limit the attack traffic.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.329-344
• /
• 2009

Ultrasonic chaotic excitations combined with sensor prediction algorithms have shown the ability to identify incipient damage (loss of preload) in a bolted joint. In this study we examine a physical experiment on a single-bolt aluminum lap joint as well as a three-dimensional physics-based simulation designed to model the behavior of guided ultrasonic waves through a similarly configured joint. A multiple bolt frame structure is also experimentally examined. In the physical experiment each signal is imparted to the structure through a macro-fiber composite (MFC) patch on one side of the lap joint and sensed using an equivalent MFC patch on the opposite side of the joint. The model applies the waveform via direct nodal displacement and 'senses' the resulting displacement using an average of the nodal strain over an area equivalent to the MFC patch. A novel statistical classification feature is developed from information theory concepts of cross-prediction and interdependence. This damage detection algorithm is used to evaluate multiple damage levels and locations.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.1024-1030
• /
• 1999

IEEE 1149.1 바운다리스캔은 보드 수준에서 고장점검 및 진단을 위한 테스트 설계기술이다. 그러나, 바운다리스캔 제어기의 특성상 테스트 패턴의 주입에서 관측까지 2.5 TCK가 소요되므로, 연결선상의 지연고장을 점검할 수 없다. 본 논문에서는 UpdateDR 신호를 변경하여, 테스트 패턴 주입에서 관측까지 1 TCK가 소요되게 함으로써, 지연고장 점검을 가능하게 하는 기술을 소개한다. 나아가서, 정적인 고장점검을 위한 테스트 패턴을 개선해 지연고장 점검까지 가능하게 하는, N개의 net에 대한 2 log(n+2) 의 새로운 테스트패턴도 제안한다. 설계와 시뮬레이션을 통해 지연고장 점검이 가능함을 확인하였다.Abstract IEEE 1149.1 Boundary-Scan is a testable design technique for the detection and diagnosis of faults on a board. However, since it takes 2.5TCKs to observe data launched from an output boundary scan cell due to inherent characteristics of the TAP controller, it is impossible to test delay defects on the interconnect nets. This paper introduces a new technique that postpones the activation of UpdateDR signal by 1.5 TCKs while complying with IEEE 1149.1 standard. Furthermore we have developed 2 log(n+2) , where N is the number of nets, interconnect test patterns to test delay faults in addition to the static interconnect faults. The validness of our approach is verified through the design and simulation.