• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4628-4636
• /
• 2023

Cables are indispensable in nuclear power plants for transmitting data measured by various types of detectors, such as self-powered neutron detectors (SPNDs). These cables will generate disturbing signals that must be accurately distinguished and eliminated. Given that the cable current is not very significant, previous research has focused on SPND, with little attention paid to cable evaluation and validation. This paper specifically focuses on the quantitative analysis of cables and proposes a theoretical model to predict cable noise. In this model, the reaction characteristics between irradiated neutrons and cables were discussed thoroughly. Based on the Monte Carlo method, a comprehensive simulation approach of neutron sensitivity was introduced and long-term irradiation experiments in a heavy water reactor (HWR) were designed to verify this model. The theoretical results of this method agree quite well with the experimental measurements, proving that the model is reliable and exhibits excellent accuracy. The experimental data also show that the cable current accounts for approximately 0.2% of the total current at the initial moment, but as the detector gradually depletes, it will contribute more than 2%, making it a non-negligible proportion of the total signal current.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2067-2080
• /
• 1994

Recently, joint blind equalization and carrier recovery for digital mobile transmission system is of growing interest. In this paper, we describe new receiver structure of joint godard blind equalizer and various recovery loop for QAM modulated signal. After a brief review of Godard blind equalizer and MAP estimation Costas loop, Generalized Costas loop, Leclert loop, Angular form loop, we present two kinds of receiver structures for joint blind equalization and carrier recovery. Using a Monto Carlo simulation technique, we can confirm that two kinds of receiver structures operate very well in the steady state.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.1
• /
• pp.43-50
• /
• 2013

The narrow dynamic range of most smart phone cameras is severely limited. It usually is narrower than the dynamic range of most scenes. So we proposes a illuminance dynamic range expansion using multi-point knee for smart phone camera. Such as logarithmic functions the proposed method compress the image sensor output signal. Additionally, the proposed method was merged into the gamma that is essential circuit for any cameras. To justifying multi-point knee effectiveness, we configure the control and quality evaluation system for smart phone camera module. Experimental results show that the lost information by cut off and saturated affectively reconstructed in darker and in brighter areas. Finally this methods have advantage to implement without any changing hardware for conventional smart phones.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.500-505
• /
• 2009

The detrimental effect of short-term fading and shadowing can be mitigated using microdiversity and macrodiversity systems, respectively. In this paper, implementation of selection combining at both micro and macro levels to improve system performance is analyzed. An assessment of the performance of such a system is carried out by considering the desired signal as Rician fading with lognormal shadowing and cochannel interference signal as Rayleigh fading superimposed over lognormal shadowing. The proposed analysis is complemented by various performance evaluation results, including the effects on overall system performance of fading severity, shadowing spreads and branch correlation existing at the base station, and correlation between base stations.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.4
• /
• pp.165-172
• /
• 2016

A Global Navigation Satellite System (GNSS), which is typically exemplified by the Global Positioning System (GPS), employs a open signal structure so it is vulnerable to spoofing electronic attack using a similar malicious signal with that used in the GPS. It is necessary to require a spoofing test evaluation environment to check the risk of spoofing attack and evaluate the performance of a newly developed anti-spoofing technique against spoofing attacks. The present paper proposed a simulation method of spoofing environment based on simulator that can be implementable in a test room and analyzed the spoofing simulation performance using commercial GPS receivers. The implemented spoofing simulation system ran synchronized two GPS simulator modules in a single scenario to generate both of spoofing and GPS signals simultaneously. Because the signals are generated in radio frequency, a commercial GPS receiver can be tested using this system. Experimental test shows the availability of this system, and anti-spoofing performance of a commercial GPS receiver has been analyzed.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.15-18
• /
• 2004

A high data rate Wireless Personal Area Networks (WPAN) system is a hot issue in wireless communication communities and being standardized. Multi-band Orthogonal Frequency Division Multiplexing (MB-OFDM) is one of the candidates for WPAN standard. In this paper, we discuss the PLCP (Physical Layer Convergence Protocol) structure for MB-OFDM. Also we evaluate the performance of two signal detection algorithms, which are the method of cross-correlation with the original preamble and the signed preamble. The latter has a low complexity with a little degradation.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.95-101
• /
• 1997

A smart pressure measurement system is described, which provides a precise A/D conversion and is highly suitable for communication with microprocessors. In order to avoid unstable problems of remote pressure sensing we have developed a new interface board which performs the A/D conversion and smart signal processing of the measured pressure data. Serial communication software which is based on ASCII code commands is also developed to process initial setup and calibration functions as well as multi-drop communication with PC. The test and evaluation of the proposed system has been shown as having the better performance compared to the other types of existing pressure measuring systems and will give good applications to the industrial use where a highly precision remote sensing is needed.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.70-75
• /
• 2011

Longitudinal recording has been the cornerstone of all two generations of magnetic recording systems, FDD and HDD. In recent, perpendicular recording has received much attention as promising technology for future high-density recording system Research into signal processing techniques is paramount for the issued storage system and is indispensable like longitudinal recording systems. This paper focuses on the performance evaluation of the various detectors under perpendicular recording system. Parameters for improving the their performance are examined for some detectors. Detectors considered in this work are the partial response maximum likelihood (PRML), noise-predictive maximum likelihood (NPML), fixed delay tree search with decision feedback (FDTS/DF), dual decision feedback equalizer (DDFE) and multilevel decision feedback equalizer (MDFE). Their performances are analyzed in terms of mean squared error (MSE) and noise power spectra, and similarity between recording channel and partial response (PR) channel.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.187-188
• /
• 2016

실내에서 작업자의 위치 정보를 취득하면 사용자의 이동 경로 파악이나 물체의 지역화 및 상황인지 서비스가 가능하다. 최근, BLE(Bluetooth Low Energy) 비콘을 사용하여 작업자의 실내 위치를 파악할 수 있는 여러 가지 연구가 진행되고 있으나 BLE 비콘의 신호세기 강도와 RSSI(Received signal strength indication)의 정확도에 대한 에러율 증가로 인해 실내 작업자 위치 파악 연구에 어려움이 있다. 본 연구에서는 BLE 비콘에서 취득한 RSSI 정보에 대해 PCA, ICA, SVM의 패턴인식 알고리즘을 적용하여 인식정확도를 구하고, 여러 패턴인식 알고리즘 중에서 어떤 알고리즘이 인식정확도 측면에서 적용이 가능한지 제시하였다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.1
• /
• pp.55-64
• /
• 2004

Conventional bipolar surface electromyography(EMG) technique detects only the superimposed electromyographic activity of a large number of motor units due to its low spatial resolution. For the diagnosis of neuromuscular disorder, the information of single MU is required. In this paper, 9 channel array surface electrode system was as designed and MLoG filter was proposed. Also the MCPT(modified convolution processing technique)method was proposed for the improvement of MUAP resolution. For performance evaluation, power spectrum analysis of random data and raw EMG signal comparison of MUAP shape and quantitative estimation of SNR were executed. As a result, the MUAP resolution improvement of 32％ was obtained from the standpoint of the signal-to-noise ratio(SNR).