• 한국항행학회논문지
• /
• 제20권4호
• /
• pp.367-373
• /
• 2016

우리는 도래각 (DoA; direction of arrival) 추정 방법 중 하나인 서로소 배열 기반의 프로퍼게이터 방법을 개선시키는 알고리즘을 제안한다. 서로소 배열 기반의 프로퍼게이터 방법은 특이값 분해없이 도래각을 추정하는 방법으로 서로소 배열 기반의 MUSIC에 비하여 현저히 낮은 복잡도를 지녔으나, 다소 저하된 도래각 추정 성능을 보인다. 우리는 이러한 성능 저하의 원인 중 하나로 잡음의 파워 스펙트럼 밀도를 포함하고 있는 신호의 자기상관행렬의 대각 성분이 사용되고 있지 않음에 있음을 파악하고, 잡음의 파워 스펙트럼 밀도가 장기간에 걸쳐 추정이 가능하다는 사실에 착안하여 신호의 자기상관행렬의 대각 성분을 사용하는 도래각 추정 방법을 제안한다. 우리는 시뮬레이션을 통해 우리가 제안한 방법이 기존의 서로소 배열 기반의 프로퍼게이터 방법보다 연산량을 4배정도 증가시키지만 탐지확률 95% 기준 하에 신호대 잡음비를 1.5dB, 도래각 분해능을 $0.7^{\circ}$ 만큼 개선시켜 그 성능이 서로소 배열 기반의 MUSIC에 보다 근접함을 관찰한다.

• 한국통신학회논문지
• /
• 제37C권11호
• /
• pp.1077-1083
• /
• 2012

GNSS의 재밍에 대응하는 기법은 입사되는 재밍 전력을 억제하는 항재밍 기법과 재밍신호원의 위치를 찾아내는 재머위치결정 기법이 주로 사용된다. 두 방법 모두 재밍신호의 방향을 탐지해야 하며 일반적으로 대표적인 도래각 결정알고리즘인 MUSIC이 사용된다. 그러나 MUSIC은 높은 분해능을 가짐에도 불구하고 모든 후보각에 대한 검색을 수행하므로 검색시간이 길다는 단점이 있다. 본 논문에서는 MUSIC의 목적함수를 Cholesky 분해를 이용하여 제곱 항들의 합 형태로 나타내고, 목적함수 계산 도중 일부의 합이 이미 기존의 최소값 보다 크면 계산을 중단함으로써 검색속도를 향상시키는 새로운 알고리즘을 제안하였다. 제안한 알고리즘의 동작은 소프트웨어 기반의 모의실험을 통하여 검증하였으며 기존 MUSIC 알고리즘과 비교하여 도래각 추정 성능은 같으나 검색속도가 최대 1.15배 향상됨을 확인하였다.

• 인터넷정보학회논문지
• /
• 제2권5호
• /
• pp.49-58
• /
• 2001

Mobile positioning measurement is the most important technology for Location Based Services in the cellular networks. Generally, we are expecting to use GPS to guarantee high accuracy of the mobile position, A CDMA network-based technique for the Mobile Station position calculation needs to be implemented in the cdma2000 network whether the handsets have GPS or not, The most reliable methods of the network-based location technologies are based on the estimation of time of signal traveling between MS and B18 in a network whose coordinates are identified, Other signal parameters such as the power of the received signal and the signal arrival direction cannot be used as main data for a location system because adoption of only the signal parameters will not meet the FCC requirements, In practice, the estimates of the time of signal propagation between MS and BTS always have errors resulting from low-resolution power of measurements and multi path signal propagation, This paper describes the combined network-based location technology in the cdma2000 1× necessary to meet US FCC requirements. The issues of a calibration table and statistic processing based on the pilot strength as well as combined network-based location technologies(TOA/ TDOA) will help to achieve higher location accuracy than specified in the US FCC Rule.

• 한국컴퓨터정보학회논문지
• /
• 제15권5호
• /
• pp.75-81
• /
• 2010

적응 배열 안테나 시스템은 간섭신호 방향으로 영점을 형성하여 표적신호를 추정한다. 그러나 적응 배열 안테나 시스템에 상관성 간섭신호가 입사된다면 표적신호를 간섭신호로 간주하여 시스템의 성능이 급격히 감소되고, 지향 오차에 민감하여 주빔이 표적신호의 입사방향을 지향하지 못한다. 본 논문에서는 고차제한조건과 지향오차수정방법을 결합하여 빔형성 알고리즘을 제안하였다. 그리고 제안한 알고리즘으로 자유도 손실을 최소화하고 간섭신호와 지향오차를 감소시켰다. 모의실험을 이용하여 제안 알고리즘과 기존 알고리즘의 성능을 비교 분석하였다. 본 논문에서 제안한 알고리즘은 신호 입사각을 정확히 추정하지만 기존의 알고리즘은 약 $0.8^{\circ}$의 오차가 발생하였다.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.8-13
• /
• 2023

We propose a method for removing interference and noise to estimate target information. In wireless channels, information signals are subject to interference and noise, making it is difficult to accurately estimate the desired signal. To estimate the desired information signal, it is essential to remove the noise and interference from the received signal, extracting only the desired signal. If the received signal noise and interference are not removed, the estimated information signal will have a large error in distance and direction, and the exact location of the target cannot be estimated. This study aims to accurately estimate the desired target in space. The objective is to achieve more presice target estimation than existing methods and enhance target resolution.An estimation method is proposed to improve the accuracy of target estimation. The proposed target estimation method obtains optimal weights using linear constraints and the minimum variance method. Through simulation, the performance of the proposed method and the existing method is analyzed. The proposed method successfully estimated all four targets, while the existing method only estimated two targets. The results show that the proposed method has better resolutiopn and superior estimation capability than the existing method.

• 한국통신학회논문지
• /
• 제33권4B호
• /
• pp.215-223
• /
• 2008

Retransmission signals from relays to destination when the destination fails to decode received signal from the source in Automatic Repeat Request (ARQ) protocol make the destination receive signals more reliably. With using omni -direction antenna in the practical system, in communication range of both the source antenna and the destination antenna, there are some relays that can be used to transmit signal to the destination. However, using all relays to transmit signal consume power and bandwidth. In this paper, we propose a new protocol in which the best relays are chosen based on threshold of distance from the source to the relay and the relay to the destination when the relays use decode- and forward (DF) protocol. Simulation results prove the efficiency of the protocol when we compare using only the best relays with using all relays to transmit signal to the destination.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.44-48
• /
• 2002

This paper describes an adaptive signal processing of digital receiver with DDC(Digital Down Convertor), DDC is implemented by using NCO(Numerically Controlled Oscillator), digital low pass filter. for the passband sampling, we present the results of digital receiver simulation with DDC. We confirm that the low IP signal is converted to zero IF by DDC. DOA(Direction Of Arrival) estimation technique using MUSIC(Multiple SIgnal Classification) algorithm with high resolution is presented. We Cow that an accurate resolution of DOA depends on the input sampling number.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.70-75
• /
• 2000

After the patterning and probe process of wafer have been achieved, the dicing process is necessary to separate chips from a wafer. The dicing process cuts a wafer to lengthwise and crosswise direction to make many chips by using narrow circular rotating diamond blade. But inferior goods are made under the influence of complex dicing environment such as blade, wafer, cutting water and cutting conditions. This paper describes a monitoring algorithm using feature extraction in order to find out an instant of vibration signal change when bad dicing appears. The algorithm is composed of two steps: feature extraction and decision. In the feature extraction, two features processed from vibration signal which is acquired by accelerometer attached on blade head are proposed. In the decision. a threshold method is adopted to classify the dicing process into normal and abnormal dicing. Experiment have been performed for GaAs semiconductor wafer. Based upon observation of the experimental results, the proposed scheme shown a good accuracy of classification performance by which the inferior goods decreased from 35.2% to 12.8%.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.72-78
• /
• 2008

The line-of-sight(LOS) stabilization system is a precision electro-mechanical gimbals assembly for suppressing vibration due to its environment and tracking the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. The controller consists of a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated by the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. The quasi-impulse response through linear element included in the gimbals could be obtained by the signal compression method. The unknown parameter of the linear element could be estimated as comparing the bode plots for impulse response from gimbals with them from model's response.