• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1599-1601
• /
• 1999

The characteristics of ultrasonic signal in insulation oil were investigated by optical fiber sensor(OFS) utilizing Mach-Zehnder interferometer. For checking the response properties of OFS ultrasonic signal was generated by function generator in various kinds of insulation oil. The attenuation of ultrasonic signal linearly increased with the increase of viscosity of insulation oil in log scale. Discharging signal was produced by neele-sphere electrode system. Intensity of discharging signal was plotted in terms of cumulative $y^2$ and the intensity of discharging signal in new oil was little bigger than that in serviced one.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.48-52
• /
• 2005

The research topic of super-RENS technology is shifting from the signal intensity (CNR; Carrier to Noise Ratio) to the signal uniformity (Jitter or bER). To achieve an uniform signal characteristics, it is important to reduce signal fluctuation in a super-RENS disc. In this study, we investigated the relation between signal fluctuation and low frequency noise (LFN), and analyzed LFN increase in recording and readout processes. It was found that signal fluctuation had a close relationship with the LFN. Also, it was found that the recorded mark shape such a bubble type and high readout power increased the LFN in recording and readout process of a super-RENS disc. So, using non-bubble type recording material and low super-resolution readout material, we markedly improved the LFN in a super-RENS disc.

• Korean Journal of Optics and Photonics
• /
• v.2 no.2
• /
• pp.67-73
• /
• 1991

The unsaturated signal gain, signal gain bandwidth, and saturation power which are important parameters determining characteristics of the semiconductor laser amplifier were measured for an AlGaAs Fabry-Perot cavity type laser amplifier and compared with the results of Fabry-Perot formula. The unsaturated signal gain 25 dB is obtained near oscillation thereshold current at $0.7\mu\textrmW$ input power. The corresponding signal gain bandwidth was about 3 GHz. Also. We measured the variation of the saturation signal gain and saturation power.

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.29-44
• /
• 1997

The purpose in this study was to review the travel characteristics of the left-turn signal system on the signalized intersections under the study in Pusan area, construct the appropriate transportation systems under the different left-turn signal system : Protected Left-Turn signal system, Permissive Left-Turn signal system, and Protected-Permissive Left-Turn signal system based upon the travel characteristics reviewed, and finally suggest the optimal left-turn signal system which could reduce traffic delay and fuel consumption. and also improve traffic safety on the signalized intersections based upon the optimal transportation system constructed. Based upon the results, it was concluded that the Protected-Permissive Left-Turn signal system would be better and safer than the Permissive Left-Turn signal system in the aspects which could reduce decrease delay and fuel consumption, and simultaneously increase traffic safety on the signalized intersections, even if the optimal Permissive Left Turn signal system was found to be the best left-turn signal system in the aspects of the Measures of Effectiveness(MOE) on the intersections under the study.

• Ocean Science Journal
• /
• v.41 no.1
• /
• pp.1-10
• /
• 2006

Total sea surface temperature (SST) in a coupled GCM is diagnosed by separating the variability into signal variance and noise variance. The signal and the noise is calculated from multi-decadal simulations from the COLA anomaly coupled GCM and the interactive ensemble model by assuming both simulations have a similar signal variance. The interactive ensemble model is a new coupling strategy that is designed to increase signal to noise ratio by using an ensemble of atmospheric realizations coupled to a single ocean model. The procedure for separating the signal and the noise variability presented here does not rely on any ad hoc temporal or spatial filter. Based on these simulations, we find that the signal versus the noise of SST variability in the North Pacific is significantly different from that in the equatorial Pacific. The noise SST variability explains the majority of the total variability in the North Pacific, whereas the signal dominates in the deep tropics. It is also found that the spatial characteristics of the signal and the noise are also distinct in the North Pacific and equatorial Pacific.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.789-796
• /
• 2012

Fingerprinting is a widely used positioning technology for received signal strength (RSS) based wireless local area network (WLAN) positioning system. Though spatial RSS variation is the key factor of the positioning technology, temporal RSS variation needs to be considered for more accuracy. To deal with the spatial and temporal RSS characteristics within a unified framework, this paper proposes an extended signal propagation mode (ESPM) and a fingerprint generation method. The proposed spatiotemporal fingerprint generation method consists of two algorithms running in parallel; Kalman filtering at several measurement-sampling locations and Kriging to generate location fingerprints at dense reference locations. The two different algorithms are connected by the extended signal propagation model which describes the spatial and temporal measurement characteristics in one frame. An experiment demonstrates that the proposed method provides an improved positioning accuracy.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.366-368
• /
• 2006

Electronic warfare Support(ES) system measures pulse characteristics for received RF signals that received from all directions. ES system discriminates the pulse trains that have a rule, correlationship, continuance from collected data and analyze the characteristics of the data, and identify the emitters by comparison with emitter identification data(EID). Because pulse density is very high and various signal source exists at modem signal environments, high-speed and accurate signal analysis is needed for realtime countermeasure to emitters. Grouping alleviates the load of signal analysis process and supports reliable analysis. In this paper, we suggest an adaptive clustering scheme regarding signal patterns.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.6
• /
• pp.572-579
• /
• 1992

In this thesis, feedback circuit and FM detector applied to superheterodyne receiver to extract audio signal without random noise Is implemented. The feedback loop circuit converts 45MHz received signal to 4SiKHz If signal containing mess-age without random noise. Also the feedback loop provides the End local frequency, so narrowband BPF which is containing maximum Doppler frequency without message Is needed. Finally, quadrature FM detector extract audio signal by synthesis o350" shifted signal and ampli-tude limited signal. RSSI characteristics is measured and audio characteristics Is compared with existing If module.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.6 s.123
• /
• pp.507-514
• /
• 2007

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acousto-ultrasonic sensors were set on the finish and the rough bite of the CNC machine. It was first evaluated that one source was affected by the other. It was found that two signals were little affected each other, and that the acoustic signal from the finish bite was more related to the surface defects. Signals from the finish bite only were then analyzed in order to observe several types of surface defects. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signals. The analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.159-161
• /
• 2003

Electrode movement signal has been widely used in resistance spot welding system This study is to compare accelerometer signal with gap sensor signal in servo gun system. This study propose that accelerometer output signal is a useful technique of quality monitoring in resistance welding processes.