• 제목/요약/키워드: Sieve

검색결과 526건 처리시간 0.026초

한반도 특산식물 개느삼의 개체군 특성 (Population Characteristics of Echinosophora koreensis (Nakai) Nakai, a Endemic Plants in Korea)

  • 김소담;문애라;안종빈;정지영;박완근;손성원
    • 한국환경생태학회지
    • /
    • 제34권1호
    • /
    • pp.18-26
    • /
    • 2020
  • 개느삼은 한반도의 일부 지역에 제한적으로 분포하는 특산식물이며, IUCN Red List의 'Endangered'로 지정된 희귀식물이다. 본 연구는 자생지의 환경변화로 쇠퇴 위협이 있는 개느삼의 분포 패턴과 개체군 구조를 조사 분석하여 향후 개느삼 개체군의 동태 및 지속성 파악을 위한 기초 자료 활용에 목적이 있다. 개느삼 개체군의 특성을 파악하기 위해 양구, 춘천, 홍천 3개 지역에 각각 2~3개의 대방형구(20m×30m)를 능선을 기준으로 설정하고, 대방형구 안에 4~7개 Transect상의 소방형구(1m×1m)를 2m 간격으로 각각 10개씩 총 530개를 설정하여 출현 개체 수 및 결실 개체 수, 개체 높이 등을 측정하였다. 확보된 종발생정보를 IUCN Red List ver 3.1의 평가기준 B를 적용하여 기존 IUCN에 평가된 범주와 비교분석하였다. 조사된 세 개 지역의 평균 개체 밀도는 3.47본/㎡로 나타났으며, 지역별로 양구 3.95본/㎡, 춘천 3.37본/㎡, 홍천 2.87본/㎡이었다. 한편, 개체군의 결실률(결실 수/개체 수)은 0.0038으로 전체 출현 개체 1,837본 중에 7본만이 결실된 것으로 나타나 생식생장(sexual reproductive) 보다는 영양생장(vegetative reproduction) 비율이 매우 높을 것으로 추정된다. 조사된 세 지역의 소방형구 개체 밀도의 분포 경향을 분석한 결과, 개느삼은 수관 열림이 높은 산지 능선을 중심으로 수관 열림이 낮은 숲 중심부로 갈수록 개체 밀도가 감소하는 경향을 보여줌으로써, 광량이 개느삼 개체의 생육에 매우 중요한 요소일 것으로 추정된다. 한편, 방형구내 출현하는 전체 개체의 높이를 분석한 결과 2.3~68.5cm로 나타났으며, 평균 20.1cm로 조사되었다. 개체 높이를 바탕으로 개느삼 개체군의 stage-structure를 분석한 결과 15~20cm를 기점으로 개체 높이가 높아질수록 점차 출현빈도가 감소하는 경향을 보여주었으며, seedling으로 추정되는 10cm 이하의 개체들의 비율도 매우 낮게 나타남으로써 향후 모니터링 자료를 바탕으로 개체군의 지속성에 대한 분석이 필요할 것으로 보인다. 한편, 확보한 종발생정보를 바탕으로 산출된 점유면적은 200㎢로 나타나 IUCN Red List 기준(criteria) B 적용 시 EN 범주를 충족하는 것으로 나타났다.

묽은황산(黃酸) 및 Cellulase에 의(依)한 목재당화(木材糖化)에 관(關)한 연구(硏究) (Studies on the Hydrolysis of Wood with Dilute Sulphuric Acid Solution and Trichoderma viride Cellulase)

  • 정인표;김홍은;민두식
    • 한국산림과학회지
    • /
    • 제41권1호
    • /
    • pp.1-6
    • /
    • 1979
  • 1. 본시험(本試驗)은 당화기질(糖化基質)로 산오리나무재(材)를 묽은황산(黃酸)으로 전처리(前處理)한 후(後) Trichoderma viride 16374호균(號菌)에서 얻은 cellulase를 작용(作用)시켜 환원당(還元糖)을 생성(生成)할 수 있는 최적조건(最適條件)을 조사(調査)한 것이다. 즉(卽) 산오리나무(10~15년생(年生))의 톱밥을 전처리(前處理)할 때 황산농도(黃酸濃度) 0.3%, 0.6%, 0.9%, 1.2%, 1.5%로 구분(區分)하고 열압시간(熱壓時間)은 $1.5kg/cm^2$에서 15분(分), 30분(分), 45분(分), 60분(分)으로 각각(各各) 구분(區分) 처리(處理)하여 건조(乾燥)시킨것을 다시 $190^{\circ}C$에서 30분간(分間) 열처리후(熱處理後) 60mesh로 분쇄(粉碎)한 것을 당화기질(糖化基質)로 사용(使用)하였다. 그리고 cellulase 반응조건(反應條件)은 0.1M황산완충액(黃酸緩衝液)(pH 5.0) 50ml, 기질량(基質量) 0.5g, 고근효소액(盬析酵素液) 0.5ml를 100ml용(用) 삼각(三角) flask에 넣고 잘 혼합(混合)한 후(後) $40^{\circ}C$에서 96시간(時間) 반응(反應)시켜 이때 생성(生成)된 환원당량(還元糖量)을 조사(調査)하였다. 2. 고근효소액(盬析酵素液)의 조제(調製)는 밀기울액체진탕배양법(液體振盪培養法)에 의(依에) 하여 생성(生成)된 조효소액(粗酵素液)을 유안절포도(硫安飽和度)에 의(依)한 고근효소액(盬析酵素液)을 만들었다. 3. 환원당정량(還元糖定量)은 DNS법(法)에 의(依)하였다. 4. 묽은황산(黃酸)으로 처리(處理)한 톱밥의 환원당(還元糖) 생성량(生成量)은 황산농도(黃酸濃度) 1.5%, $1.5kg/cm^2$에서 열압시간(熱壓時間)은 45분(分)으로 처리(處理)한 것이 16.0%로 최대량(最大量)을 나타냈으나 작용(作用)함으로서 생성(生成)된 환원당량(還元糖量)은 황산농도(黃酸濃度) 0.9%, 열압시간(熱壓時間) 60분(分) 처리(處理)한 것이 23.6%로(본시험(本試驗) 범위(範圍)에서는 47.5% 증가(增加)) 나타났다.

  • PDF

벼 품종별 입형분리기 최적 가동조건 (The Optimum Operating Conditions of Indented-Cylinder Length Grader to Remove Broken Rice based on Varietal Characteristics)

  • 이춘기;송진;윤종탁;서종호;이재은;김정태;정건호;김정곤
    • 한국작물학회지
    • /
    • 제54권4호
    • /
    • pp.366-374
    • /
    • 2009
  • 벼 품종특성을 고려한 입형분리 최적조건을 설정하기 위하여 다양한 입형 특성을 갖는 41품종의 쌀을 입형분리의 체눈 직경 3.5, 3.8 및 4.2 mm, 싸라기 수거함의 각도 5, 15, $30^{\circ}$ 조건에서 싸라기 분리능을 비교시험 하였고 다음과 같은 결과를 얻었다. 1. 싸라기 제거율은 기기적 측면에서 체눈의 직경과 깊이 및 싸라기 수거함의 각도, 품종적 측면에서 쌀알의 폭, 길이 및 천립중에 의해 주 영향을 받았다. 2. 싸라기 수거함의 각도는 지면과의 수평한 입형분리체 원통직경을 0도로 할 때 +5도와 +15사이에서 분리능이 좋았으며, +5도 이하에서는 완전미손실율 증가하고 각도가 높아질수록 완전미 손실율은 감소하나 분리된 싸라기 량도 감소되었다. 3. 기존 벼 품종에서 쌀알 기준으로 폭과 길이가 각각 2.9와 5.2 mm이상이고, 천립중이 22g 이상일 경우 4.2 mm이상, 폭이 작고 소립인 경우 3.8 mm, 그 밖의 중소립종은 3.8~4.2 mm의 체눈 직경이 적합할 것으로 판단되었다. 4. 립장이 작고, 립폭은 상대적으로 크면서 두께가 얇은 품종은 그렇지 않은 품종보다 싸라기 분리능이 떨어지는 경향이었으며, 품종에 따라 입형분리기 체눈의 직경은 크고 깊이는 얕은 체 눈 규격이 필요한 것으로 생각되었다. 5. 싸라기 비율이 상대적으로 지나치게 높을 경우에는 다소 완전미율의 소실이 있더라도 권장 체눈 크기보다 큰 쪽을 택하는 것이 싸라기 제거량을 높일 수 있었다.

탈곡기의 제작동요인이 벼의생탈곡성능에 미치는 영향 (Factors Affecting Wet-Paddy Threshing Performance)

  • 남상일;정창주;류관희
    • Journal of Biosystems Engineering
    • /
    • 제5권1호
    • /
    • pp.1-14
    • /
    • 1980
  • Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

  • PDF

차근육묘를 위한 배지의 깊이 및 착근 시기가 '설향' 딸기 자묘 소질과 정식 후 초기 생장에 미치는 영향 (Medium Depths and Fixation Dates of 'Seolhyang' Strawberry Runner Plantlets in Nursery Field Influence the Seedling Quality and Early Growth after Transplanting)

  • 박갑순;최종명
    • 원예과학기술지
    • /
    • 제33권4호
    • /
    • pp.518-524
    • /
    • 2015
  • '설향' 딸기 차근육묘에서 팽연왕겨 배지의 깊이 및 착근시기가 자묘의 생장과 본포 정식 후 초기 생장에 미치는 영향을 구명하고자 본 연구를 수행하였다. 배지 깊이에 따른 자묘 생장에서 초장은 50, 70, 및 90mm 처리가 컸고, 엽수, 관부 직경, 및 1차 근수는 처리별 차이가 인정되지 않았다. 뿌리 생체중은 배지 깊이를 70, 90, 및 110mm로 조절한 처리가 30 또는 50mm로 조절한 처리들 보다 뚜렷하게 무거웠고, 근장은 90과 110mm 처리가 가장 길었다. 지상부 생체중은 70mm 처리에서 가장 무거웠고 이 보다 얕거나 깊은 배지 깊이 처리들에서 생장량이 적어졌다. 착근시기에 영향을 받은 자묘의 생장에서 착근 시기가 빠를수록 초장, 엽면적, 관부 직경 및 생체중 등 생장이 우수하였다. 그러나 1차 근수 및 뿌리 생체중은 7월 1일, 7월 15일 및 8월 1일의 세 처리간 통계적인 차이가 인정되지 않았다. 착근시기가 빠를수록 근권의 왕겨 부착량이 많았으며, 체 진동기를 사용하여 왕겨의 제거율을 조사한 결과 7월 1일과 7월 15일 처리는 40% 미만, 8월 1일 및 8월 15 처리는 각각 64% 및 70%로써 정식 시 왕겨 제거를 위한 노동력 요구도가 높았다. 착근시기가 다른 자묘를 본포에 정식하고 45일 후 생육을 조사한 결과 7월 1일 및 15일 그리고 8월 1일 착근한 처리의 1화방 출뢰율은 93-100%, 8월 15일 처리는 67% 였다. 본 실험 결과 팽연왕겨 차근육묘의 적절한 배지 깊이는 70mm, 그리고 착근시기는 7월 20-25일이며, 이상의 결과를 활용하여 육묘농가의 시행착오가 감소하고 양질묘가 생산될 수 있다고 예상한다.

표준 시비에 따른 '신고'배 수체 및 재배지 토양의 탄소 및 질소 저장량 변화 (Annual Increase in Carbon and Nitrogen Stocks of Trees and Soils in a 'Niitaka' Pear Orchard Following Standard Fertilization Recommendations)

  • 노희명;최진호;이서연;이태규;김종성;박지숙;최장전;이민진
    • 원예과학기술지
    • /
    • 제33권4호
    • /
    • pp.591-597
    • /
    • 2015
  • IPCC 2006 지침에서 제시한 Tier 3 수준에 맞게 배나무 과수원의 온실가스 저장량을 산정하기 위하여, '신고(Pyrus pyrifolia Nakai cv. Niitaka)' 배 재배지를 대상으로 1년 시비에 따른 과수와 재배지 토양의 총 탄소와 질소 저장량을 평가하였다. 이를 위해 전라남도 나주에 위치한 농촌진흥청 배시험장 재배포장에서 $5.0{\times}3.0$으로 재식된 Y수형의 16년 생 '신고'배에 질소와 인, 칼륨비료를 각각 $200kg\;N{\cdot}ha^{-1}$, $130kg\;P{\cdot}ha^{-1}$, $180kg\;K{\cdot}ha^{-1}$ 시비하였다. 2013년 8월, 배나무 수체와 토양의 총탄소와 질소 함량을 평가하기 위해 샘플을 채취하였다. 과수는 굴취하여 주간, 주지, 측지, 잎, 과일, 뿌리로 분류하여, 총탄소와 질소 함량, 건중량을 조사하였다. 토양은 과수 주간으로부터 약 0.5m 떨어진 지점에서 0.6cm 깊이까지 0.1m 간격으로 토양을 채취하여, 풍건한 뒤 2mm체에 통과시킨 시료를 채취하여 총 탄소와 질소 함량을 분석하였다. 나무 한 그루당 건중량은 주간은 5.6kg, 주지는 12.0kg, 측지는 15.7kg, 잎은 5.7kg, 과일은 9.8kg, 뿌리가 10.5kg 이었다. 나무 한 그루당 총탄소와 질소 함량은 주간에서 2.6C kg, 0.02N kg였고, 주지는 5.5C kg, 0.04N kg, 측지는 7.2C kg, 0.07N kg, 잎은 2.6C kg, 0.11N kg, 과일은 4.0C kg, 0.03N kg, 뿌리에서는 4.8C kg, 0.05N kg이였다. 재식밀도(667trees/ha)를 기준으로 산정하였을 때, 토양에 저장되는 탄소량은 155.7Mg, 질소량은 14.0 Mg이였으며, 수체에 저장되는 탄소량은 $17.8Mg{\cdot}ha^{-1}$, 질소량은 $0.2Mg{\cdot}ha^{-1}$이였다. 따라서 배나무 재배지 내에 저장되는 총탄소량은 173.6Mg였으며, 질소량은 14.2Mg이었다. 이를 작년 2012년 결과와 비교하였을 때, 1년 시비 결과 배 과수원의 탄소 저장량은 $17.7Mg{\cdot}ha^{-1}$ 증가하였으나, 질소 저장량은 변화가 거의 없었다($0.66Mg{\cdot}ha^{-1}$).

축류(軸流) 콤바인의 개발(開發)에 관(關)한 기초(基礎) 연구(硏究)(I) -조선별장치(粗選別裝置)의 설계변수(設計變數)의 평가(評價)- (Fundamental Studies on the Development of Axial-Flow Combine(I) -Evaluation of the Design Parameters of Grain-Straw Separator-)

  • 이승규;김성태;최규홍
    • Journal of Biosystems Engineering
    • /
    • 제11권2호
    • /
    • pp.31-40
    • /
    • 1986
  • 우리 나라나 동남아(東南亞) 실정(實情)에 적합(適合)한 콤바인 개발(開發)에 관(關)한 기초(基礎) 자료(資料)를 얻기 위하여, 고정(固定)된 선별망(選別網) 속에서 로우터를 회전(回轉)시켜 짚 속에 섞여 있는 곡립(穀粒)을 선별(選別)할 수 있는 원뿔형과 원통형의 2 종(種)의 모형(模型) 축류(軸流) 조선별장치(粗選別裝置)를 제작(製作)하였다. 선별성능실험(選別性能實驗)을 통하여 여러 가지 설계변수(設計變數)가 선별특성(選別特性)에 미치는 영향(影響)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. (1)시작기(試作機)의 경사각(傾斜角)이 증가(增加)할수록, 또 선별실(選別室) 덮개 내표면(內表面)의 깃 피치가 감소(減少)할수록 곡립회수율(穀粒回收率)은 증가(增加)하고, 짚제거율(除去率)은 감소(減少)하였다. 선별망(選別網) 길이가 증가(增加)함에 따라 곡립회수율(穀粒回收率)과 전효율(全效率)은 지수함수적(指數函數的)으로 증가(增加)하였으나, 짚제거율(除去率)은 감소(減少)하였고 교반판(攪拌板)은 없는 경우(境遇)가 유리(有利)하였다. (2)로우터 회전속도(回轉速度)의 증가(增加)에 따라 곡립회수율(穀粒回收率)과 전효율(全效率)은 감소(減少)하였으나, 짚제거율(除去率)은 원통형과 원뿔형 시작기(試作機)가 서로 상반(相反)되는 경향(傾向)을 나타내었다. 또 공급속도(供給速度)의 증가(增加)에 따라 곡립회수율(穀粒回收率)과 전효율(全效率)은 감소(減少)하였으며, 짚유량(流量)의 증가(增加)에 따라 모든 효율(效率)이 감소(減少)하였으나, 전유량(全流量)의 영향(影響)은 그다지 크지 않았다. (3)짚낟알비(比)가 곡립회수율((穀粒回收率)에 미치는 영향(影響)은 그다지 크지 않았으며, 짚낟알비(比)가 증가(增加)할수록 짚제거율(除去率)과 전효율(全效率)이 증가(增加)하였다. 품종별(品種別), 수분별(水分別) 곡립회수율(穀粒回收率)의 차이(差異)는 그다지 크지 않았으나, 키가 작은 삼강벼가 곡립회수율(穀粒回收率)과 전효율(全效率)이 약간 높게 나타났고 소요동력(所要動力)도 적었다. (4)두 시작기(試作機)는 작물조건(作物條件)에 따른 선별성능(選別性能)의 변동(變動)이 비교적(比較的) 작았고, 콤바인 조선별장치(粗選別裝置)로서의 활용가능성(活用可能性)이 인정(認定)되었다. 원뿔형 시작기(試作機)는 원통형에 비해 곡립회수율(穀粒回收率)은 낮았으나 소요동력(所要動力)이 적고 짚제거율(除去率)이 높아 전효율(全效率)은 약간(若干) 높았으나 실험조건(實驗條件)에 따른 변화(變化)가 크게 나타났다.

  • PDF

함수비, 양생온도 및 흙의 입도가 Soil-Cement의 압축강도에 미치는 영향에 관한 연구(I) (Studies on the Effect of Water Content, Curing Temperature and Grain Size Distribution of Soils on Unconfined Compressive Strength of Soil-Cement Mixtures.)

  • 김재영;강신업
    • 한국농공학회지
    • /
    • 제19권1호
    • /
    • pp.4312-4322
    • /
    • 1977
  • In order to investigate the effect of the water content and the accelerated curing on the strength of the soil-cement mixtures, laboratory test of soil cement mixtures was performed at five levels of water content, four levels of accelerated curing temperatures, three levels of normal curing periods, and six levels of accelerated curing time. Also this study was carried out to investigate the effect of grain size distribution of 21 types of soils on the strength of soil-cement mixtures at four levels of cement content and three levels of curing time. The results are summarized as follows: 1. Optimum moisture content increased with increase of the cement content, but maximum dry density was changed ununiformly with cement content. Water content corresponding to the maximum strength was a little higher than the optimum moisture content along the increase of cement content. 2. In molding the specimens with the optimum moisture content, the maximum strength appeared at the wet side of the optimum moisture content. 3. According to increase of curing temperature as 30, 40, 50, and 60$^{\circ}C$, unconiiend compressive strength of soil-cement mixtures increased, the rate of increase at the early curing period was large, and approximately 120 hours was suifficient to harden soil-cement mixtures completely. 4. The strength of soil-cement mixtures at the curing temperature of 10$^{\circ}C$ decreased at the rate of 30 to 50 percent than at the curing temperature of 20$^{\circ}C$, and the strength of soil-cement mixtures at the curing temperature of 0$^{\circ}C$ increased a little with increase of curing time. 5. Although the strength of soil-cement mixtures seemed to be a little affected by the temperature difference between day time and night, it was recommended that reasonable working period was the duration from July to August of which average maximum temperature of Korea was approximately 30$^{\circ}C$. 6. Accelerated curing time corresponding to the normal curing time of 28-day was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mixtures for the cement of 9 percent and the curing temperature of 60was shorten with increase of curing temperature, also it was a little affected by the cement. Accelerated curing time that the strength of soil-cement mix- tures for the cement of 9 percent and the curing temperature of 60$^{\circ}C$ was 45 hours at the KY sample, 50 hours at the MH, 40 hours at the SS, and 34 hours at the JJ respectively. 7. Accelerated curing time was depended upon the grain size distribution of soil, it decreased with increase the percent passing of No. 200 sieve. 8. Relationship between the normal curing times and the accelerated curing times showed that there was a linear relationship between them, its slope decreased with increase of curing temperature. 9. The most reasonable soil of the soil-cement mixtures was the sandy loam which was a well graded soil. Assuming the base of road requiring 7-day strength of 21 kg/$\textrm{cm}^2$ being used, the soil-cement mixtures could be obtained with adding 6 percent of cement in such a sails S-7, S-8, S-9, S-10, S-11, S-12, S-13. 10. The regression equation between the 28-day and the 7-day strength was obtained as follow; q28=1.12q7,+6.5(r=0.96).

  • PDF

한반도 동남부 제3기 연일, 어일분지에 나타나는 현무암질암의 암석학적 연구 (Petrology of the Tertiary Basaltic Rocks in the Yeonil and Eoil Basins, Southeastern Korea)

  • 심성호;박병준;김태형;장윤득;김정훈;김정진
    • 암석학회지
    • /
    • 제20권1호
    • /
    • pp.1-21
    • /
    • 2011
  • 한반도 남동부에 자리잡고 있는 제3기 분지 중에서 장기, 어일 분지에 대한 암석학적인 기재 및 지화학적 자료를 바탕으로 과거 조구조적 위치와 현무암질암을 생성한 기원마그마의 특성을 고찰하였다. 어일 현무암질 암내 사장석 반정에서는 여러 형태의 누대구조와 융식구조 및 체구조가 나타나며 반정의 성분변화에서 핵부분은 $An_{63.46-98.38}\;Ab_{1.62-32.96}\;Or_{0-3.58}$의 영역 (anorthite-labradorite)에 도시되고, 최외각은 $An_{40.89-82.44}\;Ab_{17.10-46.43}\;Or_{0-12.68}$의 영역 (bytownite-labradorite)에 해당한다. 주원소 분석결과, 이들 암석들은 현무암질 안산암 영역에 점시되며, 비알칼리암(sub-alkaline)계열에 해당한다. TAS도에 현무암과 현무암질 안산암의 영역에 점시되며, 비알칼리암(sub-alkaline)계열에 해당한다. $SiO_2$ 값이 커질수록 $Na_2O$$K_2O$는 증가하며 $TiO_2$, $FeO^*$, CaO, MgO, $P_2O_5$는 감소하는 경향을 보여준다. $K_2O-SiO_2$도표에서도 중-K계열의 칼크알칼리계열에 해당함을 보여준다. 미량원소 및 희토류 원소의 경향은 분화가 진행됨에 따라 Co, Ni, V, Zn, Sc 등과 같은 호정성 원소는 감소하고, Ba, Rb 등의 불호정성 원소들은 증가하는 특징을 보여준다. 0.81~1.00의 $Eu/Eu^*$값은 사장석 분별작용이 일부 암석에서는 거의 일어나지 않았거나 사장석의 분별이 약했다는 것을 시사한다. 동위원소 분석결과 $^{87}Sr/^{86}Sr$은 0.704090~0.704717, $^{143}Nd/^{144}Nd$은 0.512705~0.512822로서 Nd에 비해 Sr의 변화폭이 크지만 0.0007 내외의 변화폭을 보인다. 이러한 동위원소의 변화는 연구지역 현무암이 해양판의 섭입에 의해 결핍맨틀과 부화맨틀이 혼합되어 형성된 마그마에 기원함을 추정할 수 있게 한다. 동위원소비는 맨틀 경향에 잘 따르며 결핍맨틀(DMM)과 부화맨틀(EM)의 섞임 현상에 의한 맨틀조성을 갖는 마그마에 기원을 두고 있다.

Mycoplasma 성(性) 붉나무빗자루병(病)에 관(關)한 연구(硏究) (I) (Studies on Mycoplasma-Like Organism Associated with Witches' Broom of Rhus javanica (I))

  • 김영호
    • 한국산림과학회지
    • /
    • 제47권1호
    • /
    • pp.1-15
    • /
    • 1980
  • 붉나무빗자루병은 국내외적(國內外的)으로 처음으로 발견된 병(病)으로서 그 병원체(病原體), 병징(病徵), 전염경로(傳染經路) 항생물질반응(抗生物質反應) 등을 조사(調査)하였다. 1. 붉나무빗자루병의 병징(病徵)은 지엽(枝葉)의 총생(叢生), 기관(器官)의 위축(萎縮), 위황(萎黃), 화기(花器)의 엽화(葉化) 등 빗자루병 특유(特有)의 양상을 나타내고 있다. 2. 이병주(罹病株)의 총엽병(總葉柄) 및 주맥조직(主脈組織)을 전자현미경(電子顯微鏡)에 의해서 관찰한 결과 사관세포(篩管細胞) 및 사부유세포(篩部柔細胞)에서 mycoplasma-like organism 이 관찰되었다. 3. 본(本) 병원체(病原體)는 unit membrane에 싸여 있고 이분(二分), 출아(出芽)에 의하여 증식(增殖)하며 사공(篩孔)을 통해서 식물체내(植物体內) 이동(移動)을 하는 것이다. 4. 이병엽(罹病葉) 주맥(主脈)의 사관세포(歸管細胞)는 위축(萎縮)되었고 각(各) 유관속(維管束)의 사부(篩部)는 분리(分離)되어 있는데 반하여 목부(木部)는 서로 연결되어 있다. 이병주(罹病株)의 엽내조직(葉內組織)은 선상표피(腺狀表皮)가 나타나지 않았다. 5. 전자현미경관찰결과(電子顯微鏡觀察結果) 도관세포(導管細胞)에는 이상결정물질(異常結晶物質), 호(好) osmium성(性) 과립(顆粒)들이 관찰되었고 엽록체(葉綠體)의 grana 구조(構造)가 미발달(未發達)되어 있었다. 6. 접목전염(接木傳染)이 용이(容易)하며 아접(芽接)이 절접(切接)보다 전염성이 높았고 접아(接芽)나 접수(接穗)가 활착되지 않았어도 전염은 가능했다. 그러나 즙액전염(汁液傳染), 충매전염(虫媒傳染)은 부정적이었다. 7. Teracyclin과 terramycin을 처리(處理)한 효과(効果)는 일시적이었으며 영구치료(永久治療)는 되지 않았다. 또한 근부침지(根部浸漬)가 엽면살포(葉面撒布)보다 반응(反應)이 좋았으며 농도(濃度)는 근부침지(根部浸漬)에서 1,000 ppm이 가장 효과적(効果的) 이었다.

  • PDF