• Journal of Biosystems Engineering
• /
• 제7권1호
• /
• pp.33-41
• /
• 1982

When wet-paddy is threshed by conventional auto-fed thresher, the threshed material under the concave is difficult to separate with pneumatic separation only. The development of thresher with an oscillating sieve in addition to the conventional pneumatic separation has been recommanded to improve the separation of grains from straw and chaff having high moisture content. This study was intended to evaluate the separating performance of an oscillating sieve and to obtain the effective operation conditions of the sieve separation. The sieve with oscillating in an elliptical motion was developed and installed in the experimental unit which can simulate the separating operation of the conventional auto-fed thresher. Results of the study are summarized as follows: 1. The flowing velocity of grains on oscillating sieve was increased as the sieve frequency increased but the feed rate did not significantly affect the flowing velocity of grains on sieve. 2. The effects of sieve frequency and the direction of sieve rotation on the separating performance by oscillating sieve show that increasing the frequency of sieve driving crank above the 460 rpm in the same direction of material flow (con-flow) improved the separating performance. 3. The height of grain guide plate and air velocity through the sieve to optimize the separating performance of oscillating sieve were experimentally determined to give about 10cm above the sieve and 7 m/s, respectively.

• 식물조직배양학회지
• /
• 제28권2호
• /
• pp.109-112
• /
• 2001

사부에서 사부영역 또는 사공은 원형질 연락사로부터 형성된다. 사공의 형성은 원형질 연락사에 작은 소포체의 융합 또는 새로 형성된 세포벽의 특정한 장소가 먼저 분해된 후 소포체와 세포벽의 융합으로 형성되었거나, 또는 세포질에서 여러개의 작은 소포체들이 원형으로 모여 서로 융합되면서 형성되었다. 소포체들은 세포 내에 산재해 있는 인이나 이질염 색질에서 합성되었다. 조직배양 세포로부터 유도된 사부나 사공은 일반 식물에 존재하는 사부와 마찬가지로 원통모양이었다. 사공이 다양한 방법으로 형성되며, 사공형성에 필요한 재료는 소포체에서 유래되는 것으로 추정된다.

• Journal of Plant Biotechnology
• /
• 제29권1호
• /
• pp.41-44
• /
• 2002

Streptanthus 조직배양 세포에서 유조직 세포로부터 사부 세포의 발달 동안 설탕 운반자는 유도되었고, 단당류인 포도당의 운반자는 사라졌다 (Cho 1998). Streptanthus 조직배양 세포에서 유도된 사부영역과 사공은 sieve endoplasmic reticulum (SER)과 p-protein 합성이 거의 완성되는 시기에 형성되며, SER이 새로 합성된 세포벽을 에워싼 후에 세포벽이 분해되기 시작하였다. 세포벽의 분해와 사공의 형성은 비교적 규칙적으로 진행되었다. 사공의 모양은 계란형이었고, 사공의 외부크기는 세로 1.2 $\mu\textrm{m}$~l.6 $\mu\textrm{m}$, 가로 0.8 $\mu\textrm{m}$~l.3 $\mu\textrm{m}$, 다양하고 사공의 내부크기는 별모양과 유사한 불규칙한 형태였다. 두 사부세포 사이에서 사공의 수는 $\mu\textrm{m}$$^2$당 2개~7개였고, 육상체를 포함한 사공벽에 두께는 0.05 $\mu\textrm{m}$~0.07 $\mu\textrm{m}$,의 두꺼운 벽으로 구성되었다. 사공영역과 사공의 형성에 필요한 에너지는 세포벽 가까이에 위치하고 있는 미토콘드리아에서 얻을 것으로 추측하며, 사공 형성에 대한 SER의 역할은 아직까지 설명할 수 없었다.

• Journal of Biosystems Engineering
• /
• 제6권2호
• /
• pp.33-47
• /
• 1982

To modernize the conventional rice post production technology and reduce grain losses, a transition toward the wet-paddy threshing system has been strongly demanded. The head-feeding type thresher with pneumatic separation has been used dominantly for threshing dried-paddy, but some adverse effects in separation performance for threshing wet-paddy is encounterred. In order to solve the problems, the development of thresher with an additional oscillating sieve to the conventional pneumatic separation has been recommanded. This study was intended to evaluate the separating performance of thresher with oscillating sieve which was attached additionally to the conventional auto-thresher equipped with separation system of blower and suction fan. For different feed rates and rice varieties, wet-and dry-material were tested with threshers attached with and without oscillating sieve. Results of the study are summarized as follows: 1. When the feed rates were 480 and 640 kg/hr, there was no statistically significant difference in power reqirements between the threshers with and without an additional sieve device for both dry-and wet-threshing. However, when the feed rate was 960 kg/hr, power requirements of thresher without sieve were greater for wet-paddy threshing than the thresher with the additional sieve separator by about 20% points. 2. With additional oscillating sieve device, the ratios of total weights of whole grains including grains with branch let and damaged grains to the total output did not show statistical difference among the feed rates. However, with pneumatic separation the ratio was decreased as the level of feed rate increased. 3. The total amount of grains with branchlet (including broken panicle) increased with the moisture content. For both the wet-and dry-material threshing with the additional oscillating sieve, the percent of grains with branchlet to the total output decreased greatly as the feed rate increased. 4. The output of the damaged grains increased as moisture content decreased. Especially, for the dry-paddy threshing, the additional sieve separating device produced more damaged grains than the pneumatic separation at all feed rates. 5. Generally, for dry paddy threshing, the separating performance of the thresher with the additional sieve device was better at all feed rates, showing greater difference with increasing feed rates. 6. Separating losses were greater with the pneumatic than sieve separation for both the wet-and dry-threshing. 7. The overall comparison of separating performance of threshers tested with and without an additional sieve device showed that the former was more effective than the latter for the dry-material threshing. However, for the wet-paddy threshing, the separation performance with a sieve device was better than the pneumatic only when the feed rate was high.

• 소성∙가공
• /
• 제9권4호
• /
• pp.389-394
• /
• 2000

The studies on gram size refinement for rheocast processing of hypereutectic Al-18%Si alloys have been investigated in the present study. To increase the efficiency of mechanical stirring, sieve type stirrer are newly designed and implemented for rheocasting of hypereutectic Al-18%Si alloy. Mechanical stirring of semi-solid slurry by using sieve type mechanical stirrer results in morphological changes of the primary Si particles, from angular rod shape to near spherical shape and uniform distribution of proeutectic Si. The remarkable spheroidization of Primary Si Particles and distributional uniformity of proeutectic Si show well the efficiency of sieve type mechanical stirring method which can accelerate the coalescence-fracture-wear of the individual particles by strong turbulent flow between lattices during rotation of sieve type stirrer.

• 공업화학
• /
• 제7권2호
• /
• pp.334-340
• /
• 1996

석탄을 원료로 하는 탄화 시료로 분자체 특성을 지닌 탄소 흡착제를 제조하였다. 변형제를 사용하여 탄소 분자체를 만들었으며, 변형제 농도 변화에 따른 분자체 특성에 관해 연구하였다. 그리고 탄소 분자체의 성능을 측정키 위해 산소와 질소가스를 사용하였으며, Cahn microbalance(D-200)를 사용하여 탄소 흡착제의 흡착 속도를 측정하였다. 이 실험치를 흡착 속도식에 대입하여 탄소 분자체에 따른 가스의 확산도를 구하였으며, 분자체 성능에 대한 변형제 분자량과 농도의 영향을 나타내었다.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.10-18
• /
• 2015

Purpose: The study was conducted to investigate the proper working conditions like the mesh size of the concave and the chaffer angle of the oscillating sieve, and the fan speed of the head-feeding rice combine for foxtail millet harvesting. Methods: The study aimed to determine the harvesting conditions for the rice combine harvester at a 0.5 m/s working speed and at $40^{\circ}$ and $55^{\circ}$ sieve chaffer angles. The harvesting loss of the foxtail millet based on the speed of the fan and the oscillating speed of the sieve was measured at three levels of fan speed and oscillating sieve speed. Results: The threshing rates of different foxtail millet varieties were 64.1~83.5% at a mesh size of 7 mm of the concave. In experimental foxtail millet harvesting, the optimal operating condition of the rice combine harvester included a $40^{\circ}$ sieve chaffer angle and a 4.8 Hz oscillating sieve (cleaning shoe) frequency. The grain loss was found to be lower at a $40^{\circ}$ than at a $55^{\circ}$ sieve chaffer angle. In field harvesting using the combine harvester, the lowest harvesting grain loss rate of the foxtail millet varieties ranged between 0.2~0.5% at a 7 mm mesh concave, $40^{\circ}$ chaffer angle, 4.8 Hz sieve frequency, and a 20 m/s fan speed at an engine speed of 2,000 revolutions per minute (RPM). Conclusions: Findings showed that foxtail millet could be harvested using the combine harvester.

• 대한수학회보
• /
• 제36권1호
• /
• pp.161-169
• /
• 1999

Generalized nonnegative trigonometric polynomials are defined as the products of nonnegative trigonometric polynomials raised to positive real powers. The generalized degree can be defined in a natural way. We improve and extend the large sieve involving pth powers of trigonometric polynomials so that it holds for generalized trigonometric polynomials.

• 정보처리학회논문지A
• /
• 제8A권1호
• /
• pp.36-41
• /
• 2001

본 논문에서는 첫째로 큰 정수의 소인수 분해를 위한 병렬 이차선별법(parallel quadratic sieve) 알고리즘을 제시한다. 이 알고리즘을 반복적으로 사용하여, 분산 메모리 모델(DMM)을 갖는 SIMD구조의 병렬 컴퓨터 상에서 분할정복기법을 사용하는 병력 소인수 분해(parallel factoring) 알고리즘을 제시한다. 또한 이러한 알고리즘이 시간과 프로세서의 곱의 관점에서 최적화 알고리즘임을 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1400-1402
• /
• 2001