• 한국연초학회:학술대회논문집
• /
• 한국연초학회 2000년도 24회 정기총회 및 43회 학술발표회
• /
• pp.12-21
• /
• 2000

The smoke from a burning cigarette is classified as mainstream, which is the smoke inhaled by the smoker during a puff, and sidestream, which is defined by ISO 10185 as all smoke which leaves a cigarette during the smoking process other than from the butt end. Most of the sidestream smoke is generated during static burn, that is, in between puffs. The amount of sidestream smoke generated by a cigarette depends on the cigarette construction, tobacco blend, and properties of the cigarette paper, The main paper properties affecting sidestream smoke generation are: porosity, basis weight, type and amount of filler, type and amount of burn additive.Sidestream smoke is composed of a visible phase (small liquid droplets) and an invisible phase (gaseous molecules). This paper focuses on the visible portion of the sidestream smoke. Optical methods, which are based on the relationship between light scattering and density of the rising plume of smoke, have been used successfully by the industry. However, the present trend is to use gravimetric methods where the particulate matter is captured on a Cambridge(R) filter pad and weighed. The gaseous portion of the sidestream smoke, which does not contribute to the visible sidestream smoke, passes through the Cambridge filter pad.Sidestream smoke reduction is achieved by modifying certain mass transport processes occurring in a smoldering cigarette. There are four main pathways for reducing sidestream smoke: A) less tobacco burned, B) slower rate of tobacco combustion, C) more efficient trapping of smoke by the cigarette paper, and D) more complete combustion of tobacco. This paper discusses how the physical properties of paper and cigarette construction affect sidestream smoke reduction via the above four mechanisms.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.763-768
• /
• 2009

Ozone is a strong oxidant and a powerful disinfectant. In general, it has been used in drinking water treatment during last 100years. Ozone dissolution features are defined by the two categories of ozone contactors, bubble-diffuser and sidestream ozone contactor. Currently, sidestream-injection systems are gaining in popularity but operating cost might be slightly higher. Sidestream ozone system dissolve ozone into a sidestream flow via an injection setup or in the main process flow stream in some sidestream arrangements. The sidestream flow is subsequently mixed with the main process flow stream, which is directed to a reation tank or pipeline for oxidation and disinfection reactions. The purpose of this study is to suggest optimal operating pressure, to figure out the static-mixer effect and to understand the microbubble characteristics of ozone to improve dissolution efficiency.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.128-135
• /
• 1999

This study was conducted to determine the sidestream smoke concentration, nicotine, tar, and CO, by the characteristics of tobacco leaves and their combinations. 20 kinds of tobacco leaves and 15 types of their combinations were selected for this study. After collecting the sidestream smoke by fishtail chimney, the concentrations of nicotine, tar, and CO in sidestream smoke were analyzed. Variation in nicotine concentration of sidestream smoke among tobacco leaves and their combinations was as much as 9-times. Heavy leaves and burley leaves were higher in nicotine concentration than light leaves and flue-cured leaves, respectively, the reconstituted tobacco leaf had the minimum concentration of nicotine. Tar concentration of sidestream smoke also was changed by the characteristics of tobacco leaves and their combinations. As the american C4F had the maximum concentration of tar in sidestream smoke, the reconstituted tobacco leaf showed the minimum concentration. Blending 50 % flue-cured B1-0 plus 50% burley B1-T grade showed the highest value in the nicotine concentration. Also, in case of adding B3K and izmir tobacco leaves, the nicotine concentration was decreased. The tar concentration in the sidestream smoke increased as increasing the amount of flue-cured heavy leaf. The CO concentration was not so much Changed by the characteristics of tobacco leaves and their combinations.

• 한국유체기계학회 논문집
• /
• 제12권6호
• /
• pp.47-53
• /
• 2009

Ozone is a strong oxidant and a powerful disinfectant. In general, it has been used in drinking water treatment during last 100years. Ozone dissolution features are defined by the two categories of ozone contactors, bubble-diffuser and sidestream ozone contactor. Currently, sidestream-injection systems are gaining in popularity but operating cost might be slightly higher. Sidestream ozone system dissolve ozone into a sidestream flow via an injection setup or in the main process flow stream in some sidestream arrangements. The sidestream flow is subsequently mixed with the main process flow stream, which is directed to a reation tank or pipeline for oxidation and disinfection reactions. The purpose of this study is to suggest optimal operating pressure, to figure out the static-mixer effect and to understand the microbubble characteristics of ozone to improve dissolution efficiency.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.120-126
• /
• 2005

The Fishtail Chimney system mounted on 1 channel smoking machine is not appropriate for the routine analysis of sidestream smoke, because of its low repeatability and very long time required for smoke collection. To overcome this inconvenience, we developed a new sidestream smoke collecting apparatus compatible for 8 channel linear smoking machine. An electric motor driven stroke and automatic control system were adopted in this device to maximize convenience and efficiency of its operation. Also, we carried out the international collaborative study on monitoring sidestream smoke analysis to test the performance of this system. From the statistical analysis of the data obtained in our laboratory and other participating labs, it has been indicated that the newly developed sidestream smoke collection apparatus could be applicable to the routine analysis of sidestream smoke.

• Membrane and Water Treatment
• /
• 제9권3호
• /
• pp.181-188
• /
• 2018

A sidestream contains the filtrate or concentrate from the belt filter press, filter backwash and supernatant from sludge digesters. The sidestream flow, which heads back into the sewage treatment train, is about 1-3% less than the influent flow. However, the sidestream can increase the nutrient load since it contains high concentrations of phosphorus and nitrogen. In this study, the removal of PO4-P with organic matter characteristics and bacteriological changes during the sidestream treatment via ladle furnace (LF) slag was investigated. The sidestream used in this study consisted of 11-14% PO4-P and 3.2-3.6% soluble chemical oxygen demand in influent loading rates. LF slag, which had a relatively high $Ca^{2+}$ release compared to other slags, was used to remove $PO_4-P$ from the sidestream. The phosphate removal rates increased as the slag particle size decreased 19.1% (2.0-4.0 mm, 25.2% (1.0-2.0 mm) and 79.9% (0.5-1.0 mm). The removal rates of dissolved organic carbon, soluble chemical oxygen demand, color and aromatic organic matter ($UV_{254}$) were 17.6, 41.7, 90.2 and 77.3%, respectively. Fluorescence excitation-emission matrices and liquid chromatography-organic carbon detection demonstrated that the sidestream treatment via LF slag was effective in the removal of biopolymers. However, the removal of dissolved organic matter was not significant during the treatment. The intact bacterial biomass decreased from $1.64{\times}10^8cells/mL$ to $1.05{\times}10^8cells/mL$. The use of LF slag was effective for the removal of phosphate and the removal efficiency of phosphate was greater than 80% for up to 100 bed volumes.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.109-120
• /
• 2018

Sidestream in domestic wastewater treatment plants contains high concentration of ammonium, which increases nitrogen loading rate in the mainstream. The process for deammonification consisting of partial nitritation-anaerobic ammonium oxidation (ANAMMOX) and heterotrophic denitrification is an economical method of solving this problem. Currently, about 130 full-scale deammonification plants are fully operating around the world, but none is in Korea. In order to transfer the principal information about sidestream deammonification processes to researchers and operators, we summarized basic concepts, processes type, and key influence factors (e.g., concentration of nitrogen compounds, dissolved oxygen (DO), temperature, and pH). This review emphasis on the processes of single-stage sequencing batch reactor (SBR) deammonification, which are widely used as full-scale plants. Since simultaneous processes of partial nitritation, ANAMMOX and heterotrophic denitrification occur in a single reactor, the single-stage SBR deammonification requires appropriate control/monitoring strategies for several operating factors (DO and pH mostly) to achieve efficient and stable operation. In future, AB-process consisting of A-stage (energy harvesting from organics) and B-stage (ammonium removal without organics) will be applied to the wastewater treatment process. Thus, we suggest mainstream deammonification for B-stage connected with the sidestream deammonification as seeding source of ANAMMOX. We expect that many researchers will become more interested in the sidestream deammonification.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.83-93
• /
• 2005

This study was conducted to evaluate the effect of additives in low sidestream cigarette papers, such as Mg$(OH)__2,\;TiO_2\;and\;KH_{2}PO_4$ on the delivery of mainstream and sidestream smoke. From the analysis of tar and nicotine in sidestream and mainstream smoke, the delivered ratios of tar and nicotine by sidestream to mainstream smoke in common cigarette paper were 5.32 and 8.60, respectively. However, the delivered ratios of those of the paper containing $Mg(OH)_2\;were\;2.25\~3.23,\;4.86\~7.14,\;Mg(OH)_2\;and\;KH_{2}PO_4\;were\;2.12\~2.92,\;4.67\~6.89,\;TiO_2\;was\;3.21,\;7.51 $ respectively. The deliver patterns of semi-volatile components in the cigarettes were similar each there, but a slight different pattern in the amount was observed depending on the kinds of compounds added in cigarette papers. In the cigarettes made of $Mg(OH)_2$ added paper, the aromatic components such as benzene, toluene and phenol were generated more while the aliphatic components like neophytadiene, ethyl decanoate were delivered less than the cigarettes made of common cigarette papers. However, the cigarettes manufactured with $Mg(OH)_2\;and\;KH_2PO_4$ added paper showed an opposite trend. The cigarettes made of $TiO_2$ added paper showed relatively low delivery in the most compounds measured. In sensory evaluation, cigarette papers tested were noticed a distinguishable sensory character between the low sidestream smokes with additive cigarette papers except $TiO_2$ added one. Moreover, aroma patterns detected by a electronic nose system in TPM were a similar tendency.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.233-241
• /
• 1993

도시 하수처리장에서 발생되는 반송수의 성상과 처리계통에서의 영향을 검토하기 위해 본 연구가 수행되었다. 각 단위 공정별 반송수의 유량과 분석자료를 이용하여 물질수지를 작성한 뒤 반송수의 특성을 결정하였으며 실험실 완전혼합 활성슬럿지 반응조를 현장 운전 조건과 유사한 방법으로 운전하여 반송수의 영향을 살펴보았다. 연구 결과 반송수의 유량은 유입원수량에 대해 1.2-1.8%로 적은 양이지만 높은 농도로 인하여 유기물과 영양소 부하량은 평균 부하시 20-30% 정도로 증가되고 있었으며 충격부하시는 40-70 %까지 증가되고 있었다. 혼합하수의 침전효율은 BOD 30%, SS 45%를 나타내고 있으나, 반송수에 의한 부하증가로 인해 BOD의 제거효율은 원수 기준시 10% 미만으로 떨어져 포기조에 큰 영향을 미치고 있었다. 즉, 반송수의 평균부하가 포기조에 유입되는 경우 반송수의 유입이 없는 경우에 비해 10%의 BOD 제거효율이 저하되었고 충격부하시는 80% 이상의 BOD 제거효율을 얻을 수 없었으며 50% 이하의 질산화율에 불과하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.742-748
• /
• 1993

The dynamics and control of two complex column configurations (sidestream column with stripper; prcfractionater/sidestream column configuration), which are multivariable interacting and nonlinear, have been studied. A new control scheme developed by Hanand Park(1993) to deal with the nonlinear and multivariable nature of distillation processes has been applied to these complex distillation configurations. The control scheme incorporates a nonlinear wave model into a generic model control framework. An observer based on the nonlinear wave model is used to determine the profile positions of distillation column sections. The control scheme enables tight control of the profile position of each column section that leads to fast stabilization of product compositions.