• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.338-344
• /
• 2010

Both ends of welding line are often closed by wall in the welding of ship blocks. In this research, seam tracking sensing system for butt welding in the condition with wall was developed. Seam tracking sensing system measures position of carriage from wall and detects root-pass of welding line. The system consists of the laser displacement sensors and ultrasonic sensors. The laser displacement sensor reciprocal1y rotates by the motor and measures a distance from laser sensor to the welding material. The ultrasonic sensor measures a distance between welding system and walls. The distance measured by the ultrasonic sensor is used to get X(driving) position and to determine initial and end point of the weld line. Y(weaving) and Z(height) of the weld line are obtained by the distance measured by the laser displacement sensor and the orientation of the sensor. The sensing system includes the controller that is independent from the welding carriage. The seam tracking sensing system is attached to both side of welding carriage so that interference between welding torch and sensing system can be avoided during the welding. And both side sensing system minimize dead zone. Finally, developed sensing system was adhered to welding carriage and verified usefulness by experiments.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.53-61
• /
• 2017

Cityschumers experience the urban with the visual perception while walking an average speed of 4km per hour. At this time, recognition of the color field accounts for more than 70%. Therefore, in this paper the environmental color of urban street is examined by dividing the pedestrian visual field area. In the urban street, the area of the visual field area of the pedestrian is divided into Ground Plane, Roadside, Canopy and Building Wall. In addition, we observe and color survey the environmental color of Exhibition Road, which is the northern side space of South Kensington in London, which adopted the world's first shared space. The color of the visual filed area was dominated as YR, GY, Y, PB. The Ground Pland was dominated by the YR. The reason for this is that the color of the floor has changed due to the shadows of surrounding architecture and facilities. Roadside was dominated in various ways such as GY, BG, PB, B and P. Canopy was mainly composed of PB, GY, etc. It was found that the material color of the lower part of the architecture was reflected. The architecture wall was affected by the reflectance and absorption rate of the transparent material. The first image that comes to mind when thinking about the urban is the street where pedestrians walk, feel and enjoy themselves. Therefore, it is suggested that various policy frameworks for managing and managing urban planning professionals may be different from the perceptions of pedestrians active in mega cities.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.56-70
• /
• 2022

Tombs No. 39 and No. 63 in Gyo-dong, Changnyeong, are unique in the Changnyeong area in that they do not have additional burials because they are hoenggu-style tombs with an entrance on the north side. This study tried to understand the nature and meaning of the two separate stone walls at the entrance of the tomb along with the burial process of the tomb. These two stone walls mark small tombs built independently within a large tomb, with stone wall No. 39 stone wall No. 3 (No.39-3) and No. 63 stone wall No. 3 (No. 63-3). Both units are located in the middle of the northern wall of the burial body part and share one wall with the burial body part wall stone. All animal fluids inside the stone wall were identified. In particular, it was estimated that at least three dogs were buried as a result of identification of animal fluids No. 63-3. Above all, these animals have their heads facing outward with their backs to the main occupants, and do not overlap in a limited space and are placed side by side. Changnyeong Gyo-dong No. 39-3 and 63-3 were created in the process of building the burial body, and although they are independent relics, they form a subordinate relationship in that they were built along the main burial within one tomb. In addition, it is coercive in that it is placed in an orderly manner according to a certain direction in a state that has not been dismantled after killing an animal. Therefore, It is understood to be the SHUNJANG of dogs. Studies on animal fluids excavated from tombs in the Three Kingdoms period are interpreted as animal stewardship, sacrificial collection, and animal sacrifice depending on their location, and this is known as a series of animal sacrifice rites, namely, animal stewardship and sacrifice. This recognition is based on material objectification of animals, such as food or sacrifices. However, Changnyeong Gyo-dong No. 39-3 and 63-3 are different in that they recognize animals as spiritual beings in the process of funeral rites and are closely related to the ideology that there is life after death. In addition, analysis of the location and directionality of the remains is also required from multiple angles. These two SHUNJANG correspond to the entrance to the tomb, and the location is the most open space at the entrance. The appearance of a dog looking outward, etc., can also be interpreted as the meaning of protecting the tombs and byeoksa. This appearance can be compared with the dog depicted in a mural in a Goguryeo tomb that reflects the ancient world's thought and stone figures excavated from the tomb of King Muryeong of Baekje, and it is also consistent with the meaning of the JINMYOSU protecting the ancient tombs. This suggests that a multifaceted study on animal fluid burial remains is needed in the future.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1888-1893
• /
• 2007

In this study, the microchannel plated heat exchanger were numerically studied for the enhancement of heat transfer in the channel configuration. Unit cold and hot fluid region with the microchannel were modeled and periodic boundary condition at the side wall was applied to continuously repeating geometry. The material of micro-structured plate is STS304 and working fluid is water. Triangular obstacles were placed in micro channel to enhance heat transfer. The performance of microchannel plated heat exchangers were numerically investigated with various obstacle configuration and Reynolds number under the parallel and counter flows. Heat transfer rate has increased about 18% compared with straight channel, but pressure drop also increased about 3.5 times. The main factor of increasing of pressure drop and heat transfer rate is considered that the momentum was lost to collide against obstacles, generation of secondary flow and boundary layer separation, wake and vortex forming phenomena.

• Journal of Power System Engineering
• /
• v.8 no.3
• /
• pp.52-57
• /
• 2004

A new non-destructive inspection technique has been developed. One characteristic of the technique is that defects are visualized by laser ray. Magnetic domains and domain walls of a magneto-optical sensor(MO sensor) are varied by the magnetic flux leaked by defects, and the variations are observed by the reflected light of the laser ray. The information of defect can remotely be inspected by this technique in a real time. This paper describes the results estimated on the 2-dimensional surface defects and opposite-side defects in a ferromagnetic material and the natural surface defect in a clutch disk wheel. The light region of a visible image and the magnitude of a reflected light increases as the input current of the magnetizer increases. The natural surface defect, that has not the width of crack's open mouth, can be also visualized like as 2-dimensional artificial defects.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.1
• /
• pp.40-47
• /
• 2005

As we know usually architecture of Korea landscape painting inside, pavilion(Jung-ja) and many-storied building(Ru-gak) have painted mainly. But besides general building that home, mountain fortress wall, temple, royal palace was expressed by a real view landscape painting. The main purpose of this research is to enhance the basis that can understand well tradition architecture by korea landscape painting. To achieve this goal, Even if it is same kind of building, a lot of differences become by material of roof, position of building, expenditure of building. Division of inside and outside is precious data that can know life physiognomy of general peoples. In Structural side, Expression of fabrication and value as data that can know composition and arrangement of plane are important.

• Journal of Korea Foundry Society
• /
• v.28 no.1
• /
• pp.25-30
• /
• 2008

To develop a functionally graded microstructure of cylindrical liner, effect of centrifugal casting parameters such as pouring temperature of hyper-eutectic Al-Si alloy melt, mold pre-heating temperature, and rotational frequency of mold on distribution of primary Si particles across wall thickness were investigated. Segregation tendency of Si particles toward inner side of cylindrical liner increased as the increase of rotational frequency of mold, pouring temperature of melt and mold pre-heating temperature. Especially, distribution density of primary Si particles within 1.5 mm from inner surface of cylindrical liner was above 35% under the centrifugal casting condition of $750^{\circ}C$ melt pouring temperature, $300^{\circ}C$ mold pre-heating temperature, and 2500 rpm mold rotational frequency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.1
• /
• pp.117-125
• /
• 2013

Variations of springback in stamped parts are induced by the uncontrollable noises including the variation of incoming material properties, lubrication and other forming process parameters. Reduction of springback variation is very important during springback compensation processes on stamping dies and assembly processes. To reduce the variation of springback, a robust optimization methodology which uses complex method combined with orthogonal array is proposed. The proposed method is applied to the robust design of U-channel die for the reduction of side wall curl. It is shown that the drawbead and die radius of U-channel draw die can be effectively optimized by the proposed method.

• Journal of Surface Science and Engineering
• /
• v.35 no.5
• /
• pp.289-294
• /
• 2002

ZnTe films have been grown on (100) GaAs substrate with two representative problems. The one is lattice mismatch, the other is thermal expansion coefficients mismatch of ZnTe /GaAs. It claims here, the relationship of film thickness and defects distribution with (100) ZnTe/GaAs using hot wall epitaxy (HWE) growth was investigated by transmission electron microscopy (TEM). It analyzed on the two-sort side using TEM with cross-sectional transmission electron microscopy (XTEM) and high-resolution electron microscopy (HREM). Investigation into the nature and behavior of dislocations with dependence-thickness in (100) ZnTe/ (100) GaAs hetero-structures grown by transmission electron microscopy (TEM). This defects range from interface to 0.7 $\mu\textrm{m}$ was high density, due to the large lattice mismatch and thermal expansion coefficients. The defects of low density was range 0.7$\mu\textrm{m}$~1.8$\mu\textrm{m}$. In the thicker range than 1.8$\mu\textrm{m}$ was measured hardly defects.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.24-29
• /
• 1999

The characteristic behaviors of CH3Br were examined first for the dry etching of polysilicon in a Cl2/CH3Br/O2 plasma. CH3Br is revealed one of the excellent additive gases to control anisotropy of etching profile and to give no undercutting for various typed of polysilicons. CH3Br acts as a passivation precursor on the side wall in etch cavity by forming polymer-like films such as CHxBry(x+y=1,2). The decrease of etch selectivity due to the reaction if the C-containing species from CH3Br with the surface O atoms of SiO2 was overcome by the addition of O2 into plasma, resulting that the selectivity increased by 2~3 times. According to the results of optical emission signals, CH3Br should be dissociated into several fragments to give more hydrogen atoms than bromine atoms in our helical resonator system.