• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.155-162
• /
• 2004

The volume of the metal is not changed for the plastic deformation. For metal forming simulation, rigid-plastic FEM codes are widely used. Updating geometry using Euler method in the simulation, the volume loss is occurred. In this paper, hybrid method is introduced to perform a more accurate simulation reducing computation time. In the proposed hybrid method, RK2 method is used for geometry updating at first time step and after the boundary condition of the node is changed. At the others, Adams-Bashforth or theta method is applied to update geometry. The results show that the simulations of upsetting and side-pressing can be performed within 0.02％.

• Journal of Korea Multimedia Society
• /
• v.25 no.5
• /
• pp.670-675
• /
• 2022

This study proposes an improved binarization method to improve image recognition rate. The research goal is to minimize the information loss that occurs during the binarization process, and to transform the object of the original image that cannot be determined through the transformation process into an image that can be judged. The proposed method uses a stepwise segmentation method of an image and divides blocks using prime numbers. Also, within one block, a trapezoidal type of fuzzy is applied. The fuzzy trapezoid is binarized by dividing the brightness histogram area into three parts according to the degree of membership. As a result of the experiment, information loss was minimized in general images. In addition, it was found that the converted binarized image expressed the object better than the original image in the special image in which the brightness region was tilted to one side.

• The Journal of Korean Physical Therapy
• /
• v.25 no.6
• /
• pp.399-404
• /
• 2013

Purpose: To investigate the effects of initiation side on gait symmetry in the chronic stroke patients. Methods: Twenty one patients with independent gait after stroke were divided into the paretic-leg gait initiation group (PLI) and the nonparetic-leg gait initiation group (NPLI). The symmetry ratio (SR) was calculated from of the spatiotemoral and kinematic parameter which measured by 3D motion analysis. Results: In the spatiotemporal variables, SR-step length and SR-velocity was significantly different between groups (p<0.05). In the kinematic variables, SR-TOAA and SR-SwPAA of the hip joint was significantly different between groups (p<0.05). Conclusion: We suggest that the initiating leg may influence on the gait symmetry of stroke patient These results will be a helpful reference in hemiplegic gait training or intervention.

• Journal of Bio-Environment Control
• /
• v.4 no.2
• /
• pp.232-239
• /
• 1995

This study was carried out to get required torque data needed to design and develop a roll-up ventilation system in a pipe-constructed plastic film green-house. The results obtained from this study are as follows : 1. The required torques of a roll-up ventilation system in greenhouse are the functions of its length. The torques should multiplied by the conversion coefficients (2.0 in ceiling vent, 1.8 in side vent) in case of application. 2. In constructing pipe-constructed plastic film greenhouse, a shaft pipe is the largest essential element in roll - up shaft weight constitution which have an effect on the required torques. Therefore, the pipe should be light using nonferrous materials like aluminum alloy. 3. A planetary reduction ventilator of differential ring gear type is suitable for a roll-up ventilation system, because it can make high efficient reduction just using the first step shift.

• Tribology and Lubricants
• /
• v.23 no.3
• /
• pp.109-116
• /
• 2007

A scroll compressor is on the increase in the use for the cooling and ambition machinery because of the advantages about high efficiency, low vibration and low noise. The design of thrust bearing for scroll compressor has depended on the experience. The lubrication considering the squeeze flow was applied for high side shell and low side shell of scroll thrust bearing. This work was based on governing fluid lubrication equation at the general coordinate. It shows the behavior for an orbiting scroll with direct numerical analysis using FDM. This study obtained the theoretical design value by finding load capacity and tilting angle of an orbiting scroll for thrust bearing in a scroll compressor. Especially this work performed the analysis about the design parameter. The program was written using Visual C++ to enhance user to change the design parameter easily. In particular the result value and the pressure profile were displayed as windows in every step for user to understand without difficulty.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.23-25
• /
• 2007

In this paper an estimation method is proposed to find reasonable load factor of the power system based on the conventional generation mix concept. To find the factor investment costs and operation costs are considered in the estimation. To use feasible results both supply side and demand side of views should be considered. But as a first step of this study only the generation mix is considered in this study.

• Journal of Agricultural Extension & Community Development
• /
• v.12 no.1
• /
• pp.97-107
• /
• 2005

The purpose of this study was to make a survey of the operation of childcare facilities in rural regions through in-depth interviews with 5 facility principals. Owing to regional disadvantages, rural childcare facilities have many problems as follows: uneven distribution of facilities, shortage of teachers, financial difficulties, unsuitable programs for rural regions, insufficient reeducation of principals and teachers, and poor operations and accessibility for handicapped or very young children. The principals proposed that many conditions might be made better as follows: evenly distributing facilities in step with needs and supply, raising the salary of teachers of rural facilities, supporting the facilities themselves side by side with supporting children, improving 'childcare fee supporting system' of the Ministry of Agriculture and Forestry, developing and spreading programs suitable for rural regions, and promoting the reeducation of principals and teachers through online programs.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.372-383
• /
• 2003

The purpose of this study was to assess of cane use on the hemiplegic gait of strock patients in temporal and spatial variables. Subjects were thirteen including 8 men and 5 women. They could walk independently without cane, To compare the effect of walking with and without a cane, temporal and spatial variables was measured using GAITRite. Cane walking demonstrated increased stance time on the affected side, and swing time, step length on the sound side were increased, and base of support was decreased. In conclusion, hemiplegic gait pattern of strock patients were improved with cane than those not using a cane.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.234-235
• /
• 2005

This paper present a new disk-type piezoelectric transformer. The input side of the transformer has a crescent-shaped electrode and the output side has a focused poling direction. The piezoelectric transformers operated in each transformer's resonance vibration mode. The electrodes and poling directions on commercially available piezoelectric ceramic disks were designed so that the planar or shear mode coupling factor ($k_p,\;k_{15}$) becomes effective rather than the transverse mode coupling factor ($k_{31}$).

• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.279-286
• /
• 2008

Numerical analysis is done to investigate which would be the most influencing process parameter in determining the uniformity of deposition thickness in TiN ICP-CVD(inductively coupled plasma chemical vapor deposition). Two configurations of ICP antenna are modeled; side and top planar. Side and top gas inlets are considered with each ICP antenna geometries. Precursor for TiN deposition was TDMAT(Tetrakis Diethyl Methyl Amido Titanium). Two step volume dissociation of TDMAT is used and absorption, desorption and deposition surface reactions are included. Most influencing factors are H and N concentration dissociated by electron impact collisions in plasma volume which depends on the relative positions of gas inlet and ICP antenna generated hot plasma region. Low surface recombination of N shows hollow type concentration, but H gives a bell type distribution. Film thickness at substrate edges is sensitive to gas flow rate and at high pressures getting more dependent on flow characteristics.