• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.470-487
• /
• 1996

The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.

• 대한치과교정학회지
• /
• 제54권2호
• /
• pp.108-116
• /
• 2024

Objective: A three-dimensional-printed individual titanium plate was applied for maxillary protraction to eliminate side effects and obtain the maximum skeletal effect. This study aimed to explore the stress distribution characteristics of sutures during maxillary protraction using individual titanium plates in various directions and locations. Methods: A protraction force of 500 g per side was applied at forward and downward angles between 0° and 60° with respect to the Frankfort horizontal plane, after which the titanium plate was moved 2 and 4 mm upward and downward, respectively. Changes in sutures with multiple protraction directions and various miniplate heights were quantified to analyze their impact on the maxillofacial bone. Results: Protraction angle of 0-30° with respect to the Frankfort horizontal plane exhibited a tendency for counterclockwise rotation in the maxilla. At a 40° protraction angle, translational motion was observed in the maxilla, whereas protraction angles of 50-60° tended to induce clockwise rotation in the maxilla. Enhanced protraction efficiency at the lower edge of the pyriform aperture was associated with increased height of individual titanium plates. Conclusions: Various protraction directions are suitable for patients with different types of vertical bone surfaces. Furthermore, when the titanium plate was positioned lower, the protraction force exhibited an increase.

• Geomechanics and Engineering
• /
• 제38권4호
• /
• pp.397-408
• /
• 2024

Buried box culverts are crucial elements of transportation infrastructure. However, their behavior under foundation loads is not well understood, indicating a significant gap in existing research. This study aims to bridge this gap by conducting a detailed numerical analysis using the Finite Element Method and Abaqus software. The research evaluates the behavior of buried box culverts by examining their interaction with surrounding soil and the pressures from surface foundation loads. Key variables such as embedment depth, culvert wall thickness, concrete material properties, foundation pressure, foundation width, soil elastic modulus, and friction angle are altered to understand their combined effects on structural response. The methodology employs a validated 2D numerical model under plane strain conditions. Parametric studies highlight the critical role of culvert depth (H) in influencing earth pressure and bending moments. Foundation pressure and width demonstrate complex interdependencies affecting culvert behavior. Variations in culvert materials' elastic modulus show minimal impact. It was found that the lower wall of the buried culvert experiences higher average pressure compared to the other two walls, due to the combined effects of the culvert's weight and down drag forces on the side walls. Furthermore, while the pressure distribution on the top and bottom walls is parabolic, the pressure on the side walls follows a different pattern, differing from that of the other two walls.

• 보존과학회지
• /
• 제38권4호
• /
• pp.277-288
• /
• 2022

'Eve 58-1', the subject of this study is a statue made of plaster and its structural stability was evaluated by utilizing the CAE program in order to prevent the risk of damage arising from impact and vibration that are generated during the packaging and transportation process given its material characteristics. CAE is an abbreviation for Computer Applied Engineering for realization by predicting changes at the time of application of virtual physical energy. It is applied by reflecting the physical property conditions and each boundary condition of plaster, and the digital images of the internal and external structure of the work were acquired through 3D scanning and CT analysis for interpretation by executing finite element modeling. When acceleration is applied to the work in the direction of its own weight, the left-right side and the front-rear side, it was possible to confirm a maximum displacement value of 15.24 mm in the head section of the front-rear side direction that has been tilted by approximately 27° from the Y-axis and the largest stress value of 12.46 MPa was at the left ankle section. The corresponding results confirmed that the left ankle section is the most vulnerable area and the section for which precautions need to be exercised and supplemented at the time of transporting the work by means of objective values.

• 동아시아경상학회지
• /
• 제4권3호
• /
• pp.1-17
• /
• 2016

Businesses are using culture marketing as a new promotional tool and as a marketing strategy since consumers have desire for not only economical fulfilment, but also emotional and psychological fulfilment. Similar to service industry, medical service industry has started to use culture marketing on its service industry management side. Therefore, this paper will propose necessity and usable culture marketing in hospitals to identify the current position of culture marketing in medical service industry. In conclusion, the present research offers the following implication. First, culture marketing has a partial offsetting impact to those who have negative emotion regarding the medical service industry. This is because of the positive impact of culture marketing on a customer response and customer satisfaction. Moreover, by considering the fact that only a culture synthesis and a culture style have a positive impact, focusing on a culture synthesis and a culture style would be treated as an advantageous strategy.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.144-151
• /
• 2002

This work focuses on finding out the noise source and the method of reducing the noise level of LPG(liquefied petroleum gas) fuel injector. The noise of LPG injector in operating condition is due to the impact between valve and valve seat. This study shows that if the revolution of engine is increased, the noise of LPG injector will be more serious but it is not nearly affected by the increment of fuel pressure. The source and transmission paths of noise are identified through the analysis of noise generation mechanism and noise spectrum. The sound absorbing material is tested to verify its efficiency of sound absorption thor the LPG injector. The effect of noise reduction of absorbing material is remarkable when the engine speed is high. Consequently two methods of reducing the noise level are suggested from the identified results. The one is to equip the absorbing material on the outer side of injector and the other is to coat with a soft material or equip a soft ring on the surface of impact.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.249-257
• /
• 1999

A three dimensional finite model of a human neck has been developed in an effort to study the mechanics of cervical spin while subjected to vertical impact. This model consisting of the vertebrae from C1 through C7 including posterior element and ligaments was constructed by 2mm thick transverse CT cross-sections and X-ray film taken at lateral side. Geometrical nonlinearity was also considered for the large deformation on the disc. ABAQUS package was used for calculation and its results were verified comparing with responses of a model under static loading condition with published in-vitro experimental data. There were more cervical fracture in the restrained (compression) mode than in the nonrestrained (flexion-compression and extension-compression) mode. Upper cervical(C1-C2) injuries were observed under compression-extension modes, while lower cervical injuries occurred undjer compression-flexion modes. Posterior ligament distraction without bony damage at the upper cervical spin(C1-C2) were observed secondary to C5-C7 trauma in compression-flexion modes.

• Asian Journal of Innovation and Policy
• /
• 제10권1호
• /
• pp.68-89
• /
• 2021

The expansion of irrigated agricultural production can be appropriate for the southeast region in the U.S. as a climate change adaptation strategy. This study investigated the effect of supplemental development of irrigated agriculture on the regional economy by applying the supply side Georgia multiregional input-output (MRIO) model. For the analysis, 100% conversion of non-irrigated cultivable acreage into irrigated acreage for cotton, peanuts, corn, and soybeans in 42 counties of southwest Georgia is assumed. With this assumption, the difference in total net returns of production between the non-irrigation and irrigation method is calculated as input data of the Georgia MRIO model. Based on the information of a 95% confidence interval for each crop's average price, the lower and upper bounds of estimated results are also presented. The total impact of cotton production was $60 million with the range of $35 million to $85 million: The total impact of peanuts, soybeans, corn was $10.2 million (the range of $3.28 million to $23.7 million), $6.6 million (the range of $3.1 million to $10.2 million), $1.2 million (the range of -$6 million to $8.5 million), respectively.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.157-164
• /
• 2014

본 연구에서는 2010년부터 2013년까지 4년간 연안개발사업에 따른 일반해역이용협의서 133건을 분석하여 사업유형별 해양환경영향평가 개선방안을 제시하였다. 침식방지사업은 정확한 침식원인 분석이 선행되어야 하고 주변 해안의 상태와 구조물 설치 시 추가적인 문제점 발생 가능성에 대해 정확히 예측해야 하며, 사업시행 후 사후모니터링을 통한 침식방지 효과를 입증하는 체계적인 시스템이 마련되어야 한다. 호안 및 해안도로 건설사업의 경우, 무분별한 해안도로의 건설은 지양하고 구조물 안정성을 충분히 검토하여야 하며 반사파 증가에 따른 해안침식의 문제점을 함께 검토해야 한다. 그리고 침수방지 사업은 평가항목에 파랑을 선정할 필요가 있고 이상 파랑의 영향을 함께 고려해야 한다. 친수공간 조성사업은 종합적이고 체계적인 공간계획이 수립되어야 하고, 자연환경을 최대한 보전하고 자연과 융화될 수 있는 개발이 될 수 있도록 검토를 강화해야 할 것이다. 아울러 연안개발사업과 관련하여 많은 문제점이 내재되어있어 법 제도적 측면에서의 지원과 함께 추후 해역별, 사업별 특성이 다양하게 반영된 추가적인 연구가 필요할 것으로 판단된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.545-552
• /
• 1998

A study on collision analysis of TGV-K using a 2-dimensional model is described to evaluate its crashworthiness. Two-dimensional analysis gives good information on overriding behaviour and impact forces applied to interconnecting devices such as side buffers, ball & socket joints, hooks, pins, and fingers. Since the headstock of TGV-K is not designed in a crashworthy point of view, its conceptual design fur KHST(Korean High Speed Train), under development, is suggested to improve crashworthiness. The suggested design, which adopts an energy absorber and a crashworthy headstock, is compared with the conventional headstock on dynamic behaviour to the vertical direction under the accident scenario of SNCF (collision at 110km/h against a movable rigid mass of 15 ton). It is concluded that the design modification make little difference in vertical motion. To evaluate validation of the 2-dimensional model, the results fur longitudinal motion is compared with those of 1-dimemsional one. It is found that the two results are in good agreements.