• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.1
• /
• pp.11-16
• /
• 2014

Objectives: The aim of this study was to evaluate the pattern of lingual split line when performing a bilateral sagittal split osteotomy (BSSO) for asymmetric prognathism. This was accomplished with the use of cone-beam computed tomography (CBCT) and three-dimensional (3D) software program. Materials and Methods: The study group was comprised of 40 patients (20 males and 20 females) with asymmetric prognathism, who underwent BSSO (80 splits; n=80) from January 2012 through June 2013. We observed the pattern of lingual split line using CBCT data and image analysis program. The deviated side was compared to the contralateral side in each patient. To analyze the contributing factors to the split pattern, we observed the position of the lateral cortical bone cut end and measured the thickness of the ramus that surrounds the mandibular lingula. Results: The lingual split patterns were classified into five types. The true "Hunsuck" line was 60.00% (n=48), and the bad split was 7.50% (n=6). Ramal thickness surrounding the lingual was $5.55{\pm}1.07$ mm (deviated) and $5.66{\pm}1.34$ mm (contralateral) (P =0.409). The position of the lateral cortical bone cut end was classified into three types: A, lingual; B, inferior; C, buccal. Type A comprised 66.25% (n=53), Type B comprised 22.50% (n=18), and Type C comprised 11.25% (n=9). Conclusion: In asymmetric prognathism patients, there were no differences in the ramal thickness between the deviated side and the contralateral side. Furthermore, no differences were found in the lingual split pattern. The lingual split pattern correlated with the position of the lateral cortical bone cut end. In addition, the 3D-CT reformation was a useful tool for evaluating the surgical results of BSSO of the mandible.

• Journal for History of Mathematics
• /
• v.23 no.3
• /
• pp.45-56
• /
• 2010

Sequent Calculus is a symmetrical version of the Natural Deduction which Gentzen restructured in 1934, where he presents 'Hauptsatz'. In this thesis, we will examine why the Cut-Elimination Theorem has such an important status in Proof Theory despite of the efficiency of the Cut Rule. Subsequently, the dynamic side of Curry-Howard correspondence which interprets the system of Natural Deduction as 'Simply typed $\lambda$-calculus', so to speak the correspondence of Cut-Elimination and $\beta$-reduction in $\lambda$-calculus, will also be studied. The importance of this correspondence lies in matching the world of program and the world of mathematical proof. Also it guarantees the accuracy of program.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.987-992
• /
• 1997

Burrs always come out with the machining of ducterial with small size. Though the size of burrs is small, burrs dominate deterioration of the accuracy of the micro grooves. So the burr generation model especially side burr generation model was investigated to predict the size of the burrs at the given cutting conditions. The side shear plane is introduced to build the burr generation model and the width of side shear plane nomalized with cutting depth is defined with the shear angle. From the theoretical observation, the width of side shear plane can vary up 40% of the cutting depth. To determine the size of burr and stiffness, single groovings were carried out and it was found that there exist a critical depth of cut that the size or stiffness of the burr vary.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.943-948
• /
• 2006

This study carried out to investigate the effect of cutting stimulation on time of cutting, yield and length of antler in Sika deer. There was no significance between surgical stimulation and length of antler, but length was the longest in one side cutting group and the shortest in both side cutting group. Development of point was increased as the number of wounds in the second year (P<0.05). Time of casting was 2 weeks earlier in one side cutting group (P<0.05) than in both sides cutting group. Yields of velvet antler were 148±23g when pedicle was not cut, and 126±61g, 179±63g, 170g, and 48±25g when pedicle was cut by 0.3cm, 0.4cm, 0.5cm and 0.6cm thickness, respectively. In case of 0.6cm, yield was significantly smaller than others (P<0.05). The most desirable thickness of pedicle cut was 0.4～0.5mm. Yield of antler was increased as the size of wound in the first year, and 588, 790 and 657g in control, one-cut and both-cut, respectively. Yields of antler in one-cut is significantly high (P<0.05).

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.115-121
• /
• 2006

This study carried out to investigate the effect of cutting stimulation on time of cutting, yield and length of antler in Sika deer. There was no significance between surgical stimulation and length of antler, but length was the longest in one side cutting group and the shortest in both side cutting group. Development of point was increased as the number of wounds in the second year (P<0.05). Time of casting was 2 weeks earlier in one side cutting group (P<0.05) than in both sides cutting group. Yields of antler were $148{\pm}23g$ when pedicle was not cut, and $126{\pm}61g$, $179{\pm}63g$, 170g, and $48{\pm}25g$ when pedicle was cut by 0.3cm, 0.4cm, 0.5cm and 0.6cm, respectively. The most desirable thickness of pedicle cut was 0.4-0.5mm. Yield of antler was increased as the size of wound in the first year, and 588, 790 and 657g in control, one-cut and both-cut, respectively. Yields of antler in one-cut is significantly high (P<0.05).

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2666-2671
• /
• 2011

In this paper, a theoretical approach was studied to make a baseline box type model satisfying the stiffness condition of a cut-out model. First, we compared the sum of the sectional theoretical deflections and the FEM result of the cut-out model under the static load test conditions, and we obtained good correlations from both the results. Second, To obtain the thickness of the baseline model, we used the mean value of geometric moment of intertia of the side wall and roof structure. Also, we compared the theoretical results and the FEM result of a baseline model, and we obtained good correlations. It is considered that the developed theoretical approach can be used for the weight reduction of train carbodies.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.103-108
• /
• 1999

A problem in the grinding with a small diametric wheel is the decrease of wheel speed. In order to resolve this problem, an accelerating unit which increases the wheel speed is recommended. In this paper, the accelerating effect of an accelerating unit has been investigated through the side-cut grinding experiments performed with a vitrified bonded CBN wheel in a machining center(MC). The static stiffness, normal force, and machining error were measured in the experiments. As the accelerating unit is attached on the column of machining center, the static stiffness of tool system is largely decreased. But as the wheel speed increased by the accelerating unit, this problem is overcome and machining efficiency is improved. The lesser the quill stiffness was, the higher the accelerating effect became.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.68-72
• /
• 2012

Al2017 is typical Duralumin of self-hardening aluminum alloy. It is lightweight, formability and machinability so throughout the industries have widely used automobile, electronics, semiconductor and aircraft as material. A variety of CNC machine tool processing technology, scientific principles and experience have been studied in order to increase accuracy and productivity. Using a machining center is to constant amount of side step and cutting characteristics studied changing depth of cut, revolution per minute and feed rate.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.371-376
• /
• 1986

This study to elucidate concentrations of impurities such as methanol and fusel oil formed during fermentation process among the different materials and has been applied technical seperation for processing improvement by continuous distillation of super-allospas type. Methanol was formed high concentrations of cutting dried sweet potato and tapioca in order among the different materials during fermentation process. n-Propanol oil was formed high concentration of rice, cutting dried sweet potato, corn, naked barley and tapioca in order among the those materials. I-Buthanol showed high concentration of tapioca, corn, rice, cutting dried sweet potato and naked barley in order and isoamyl-alcohol showed high concentration of tapioca, rice, cutting dried sweet potato, corn and naked barley in order. Using the continuous distillation of super-allospas type, the following are collection ratios of n-propanol, iso-butanol, n-butanol and iso-amylalcohol: 37.9％, 28.6％, 37.4％, and 56.1％ when 78.25％ (v/v), 68.54％ (viv), 50.0％ (viv), and 50.0％ (v/v) alcohol are used, respectively. Fusel oil and bad alcohol put into the recovery column and then seperated directly by side cut of fusel oil partially from plate of tower bottom after concentration again. Extra impurities seperated by fusel oil seperator when 20 ％ (v/v) alcohol adjusted with water.