• Journal of Technologic Dentistry
• /
• v.8 no.1
• /
• pp.85-90
• /
• 1986

The effect of splinting on aqbutment tooth distal movement was performed in vitro study. An acrylic resin mandibular model with missing 2nd premolars, molars and a removable partial denture framework were constructed. The roots of the canines, 1st premolars and edentulous ridges were coated with silicone rubber. A modified Ney Surveyor was used for vertical load appkication, and abutment tooth distal movement were measured with a dial gauge with four conditions of splinting methods were tested by applying unilateral vertical loadings. The results are follows; 1. The magnitude of abutment tooth distal movement on the non-load side was less 40$\sim$69% than that occurred on the load side. 2. On the load side, reducing effect of splinting on abutment tooth movement in the condition of load side double abutment(30%), non-load side double abutment(10%), double abutments of both sides(40%) was compared with single abutments of both sides. 3. On the non-load side, reducing effect of splinting on abutment tooth movement in the condition of load side double abutment(5%), non-load side double abutment(22%), double abutments of both sides(59%) was compared with single abutments of both sides. 4. The magnitude of abutment tooth distal movement in the condition of double abutments of both sides was less 40$\sim$59% than that in the condition of single abutments of both sides.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.243-248
• /
• 2014

PURPOSE: This study was aim to the change of muscle activities of lower extremity and waist during lifting a small object on the floor according to different foot position of women in their twenties wearing a skirt. METHODS: 9 women in their twenties wearing a skirt were selected and were measured the muscle activities of medial gastrocnemius (MG), tibialis anterior (TA), vastus lateralis (VL) and iliocostalis (IC) when they lifted a small object on the floor. The two different foot position employed were "both feet posed straight side by side" (condition 1) and "both feet posed diagonally to 45 degree" (condition 2) used. The order of feet position was selected randomly and the subject took a rest for 30 min between tests to prevent muscle fatigue. We calculated the mean and standard deviation of muscle activities and used Mann-Whitney U test to compare the difference between the two foot positions with SPSS(IBM Korea) RESULTS: The muscle activity of condition 2 was greater than that of condition 1 in right side of TA, VL, and IC and left side of TA, VL, MG and IC. The right side of TA, VL and left side VL were significant difference between condition 1 and condition 2(p<.05). CONCLUSION: We suggest "both feet posed straight side by side" position is better if a woman wearing a skirt lift the small object and it will help prevent the low back and lower limb problems in the future.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.31-69
• /
• 1996

The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.37-43
• /
• 2008

Working condition is one of the most important factors in precision working. In this study, we optimized the vibration acceleration level(VAL) of Al 2024 alloy to select optimum working condition of side wall end-milling using RSM(Response Surface Methodology). RSM was well adapted to make analytic model for minimizing vibration acceleration, created the objective function and saved a great deal of computational time. Therefore, it is expected that the proposed optimization procedure using RSM can be easily utilized to solve the optimization problem of working condition. The experimental results of the surface roughness and VAL showed the validity of the proposed working condition of side wall end-milling as it can be observed.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.967-973
• /
• 2004

Rock socketed drilled shafts transfer significant portion of structural loads at the socketed part. Therefore, a proper design of side and base resistances of a shaft at the socket is a major concern for the geotechnical engineers. In this study, we modified the Hoek-Brown criterion to estimate side resistance of rock socketed drilled shafts. Earlier method to compute side resistance of a shaft is linear or power functions of intact rock masses. However, side resistance is mobilized like shearing which influenced by the mechanical properties of concrete and rock masses, adhesion of rock/concrete interface, roughness of rock socket. Therefore, a single coefficient or power of uniaxial compressive strength of intact rock cannot provide accurate values of side resistance in a wide range of the uniaxial compressive strength. A new approach proposed in this study can consider in situ rock mass condition (frequency or discontinuities, weathering condition), and rock types thus, it has a wider applicability than the earlier models.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.6 s.261
• /
• pp.671-678
• /
• 2007

Front-side members of automobile, such as the hat shaped section members, are structures with the greatest energy absorbing capability in a front-end collision of vehicle. This paper was performed to analyze energy absorption characteristics of the hat shaped section members, which are basic shape of side member. The hat shaped section members consisted of the spot welded side member which was utilized to an actual vehicle and CFRP side member for lightweight of vehicle structural member. The members were tested under static axial loading by universal testing machine. Currently, stacking condition related to the collapse characteristics of composite materials is being considered as an issue fer the structural efficiency and safety of automobiles, aerospace vehicles, trains, ships even elevators during collision. So, energy absorption characteristics were analyzed according to stacking condition and shape of section and compared the results of spot welded side member with those of CFRP side member.

• Physical Therapy Korea
• /
• v.20 no.4
• /
• pp.47-54
• /
• 2013

The purpose of this study was to investigate the effects of active and passive postural perturbation on ankle dorsiflexor responses in stroke patients. The subjects consisted of 13 stroke patients. Using wireless electromyography, the patients' ankle dorsiflexor muscle responses were measured under the following conditions: active dorsiflexion (AD), active perturbation (AP), and passive perturbation (PP). Tibialis anterior muscle activity increased most significantly during PP of the affected side ($118.64{\pm}56.28$). The most significant increase for the non-affected side was in AD ($72.64{\pm}24.56$). Tibialis anterior muscle activity was compared under each condition. The affected side showed significant differences between PP and AD and between PP and AP (p<.05). The non-affected side showed not significant differences between each condition. The ratios of tibialis anterior muscle activity under AP to that under AD were 1.00 on the affected side and .75 on the non-affected side and the difference was not significant (p>.05). The ratios of tibialis anterior muscle activity under PP to that under AD were 3.30 on the affected side and 1.14 on the non-affected side and the difference was significant (p<.05). Passive perturbation improved tibialis anterior muscle activity on the affected side, and training based on this approach may have the potential to improve the ankle dorsiflexion of people with stroke.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3423-3428
• /
• 2007

This paper shows that inlet humidity condition at cathode side is one of dominant parameters affecting the performance of PEMFC. To investigate effects of inlet humidity condition, the performance measurements were conducted for a single PEMFC with two operating variables : cathode relative humidity and dry condition in anode dry. The fuel cell employed for the experiments is a unit PEMFC with a 25$Cm^2$, Nafion$^(R)$112 membrane. As a result of this study, the cell performance is getting higher by increasing inlet humidity condition at cathode side. The cell performance is different from each operating temperature an it has maximum30% higher than dry condition at 60$^{\circ}C$ operating temperature with 80% relative humidity.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.153-161
• /
• 2003

The purpose of this paper is to investigate the soil-water characteristic curves for an unsaturated soil. To this ends, a series of suction measured test was conducted on the selected 4 kinds of soils taken from different sites of Korea, using modified pressure plate apparatus. Form the test results, the water contents, degree of saturation and volumetric water contents were analyzed with the suction. And the soil-water characteristic curves of unsaturated soil were drawn from the test results for various factors. The characteristic curves drawn with water content vs matric suction were classified certainly the difference in wet side but were not classified in dry side. The characteristic curves drawn with degree of saturation vs matric suction for unsaturated soil were shown the opposite inclination as compared with the former curve. But the characteristic curve with volumetric water content vs matric suction was described suitably not only in wet side condition but also in dry side. And it was found that the volumetric water contents of loose soil was high at the initial condition but that of dense soil was high at final condition (dry side).

• Physical Therapy Korea
• /
• v.19 no.3
• /
• pp.40-50
• /
• 2012

The purpose of this study was to investigate the effect of visual feedback on the postural control of stroke patients, by systematically varying conditions of visual feedback [eye-open condition (EO) vs. eye-closed condition (EC)], and base-support (both-side support, affected-side support, and unaffected-side support). In this study, we allocated 41 stroke patients with no damage in the cerebellum and visual cortex who can walk at least 10 meters independently, and 35 normal adults who have no experience of stroke to the control group. Both groups were asked to perform a "sit-to-stand" task three to five times, and their postural control ability was measured and compared in terms of asymmetric dependence (AD) instead of the traditional symmetric index (SI) in the literature. The results showed that although both subject groups maintained better postural control in the EO condition than in the EC condition, the patient group appeared to be more stable in EC than in EO when they were required to perform the task of the support condition given on the affected side. These results implied that visual feedback can impair stroke patients' postural control when it is combined with a specific support condition.