• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1045-1053
• /
• 2014

In this paper, we assume that the information leakage through side-channel signal may occur from the card payment terminal and newly introduce a real application attack model. The attack model is a side channel attack based on vibration signals, which are detected by a small sensor attached on card terminal by attacker. This study is similar to some other studies regarding side channel attack. However, this paper is different in that it is based on the non-language model. Because the financial transaction information such as a card number, password, mobile phone number and etc cannot have a constant pattern. In addition, there was no study about card terminal. Therefore, this new study is meaningful. We collected vibration signals on card terminal with a small wireless sensor and analyzed signal data with statistical signal processing techniques using spectrum of frequency domain and principal component analysis and pattern recognition algorithms. Finally, we evaluated the performances by using real data from the sensor.

• Journal of Environmental Impact Assessment
• /
• v.19 no.2
• /
• pp.153-168
• /
• 2010

The objectives of this study are to analyze flow characteristics for a side weir, which is an inlet structure for flow discharge reduction in the main channel through 3 dimensional numerical analysis and to understand the efficiency of the overflow effect at the side weir. In this study over 40 simulations using FLOW-3D, a computational fluid dynamics program were conducted, and the results were analyzed to find the influence of the flow hydraulics, geometry, channel and weir shapes on the coefficient. It is especially considered the relatively high stage in downstream that may cause flow within channel to be backed up along the channel. Additionally by setting up the scale of simulations much larger than the existing test equipment designed by other researchers, it is intended to analyze more accurate hydraulic behavior along with the realistic hydraulic features such as structures and volumes of flow. The results show that for design with subcritical flow only if the Froude number of upstream is sustained below 0.5 and the length of weir is 33-100% of the width of channel, it is expected to improve the efficiency of the overflow over a side weir.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1147-1152
• /
• 2009

The objectives of this paper are to study the characteristics of heat transfer and pressure drop of the zigzag channel PCHE using diffusion bonding technology by numerical analysis. PCHE of five types are designed, which are zigzag channel angle $180^{\circ}$, $160^{\circ}$, $140^{\circ}$, $120^{\circ}$ and $100^{\circ}$. The zigzag PCHE was numerically investigated for Reynolds number in a range of $150{\sim}800$. The temperatures of the hot side were performed at $80^{\circ}C$ while that of the cold side was conducted at $20^{\circ}C$. The results show that the performance of heat transfer rate for zigzag channel $100^{\circ}$ increases about 11.5% compared to that of zigzag channel $180^{\circ}$. On the other hand, the performance of pressure drop for zigzag channel $100^{\circ}$ is remarkably higher than that of zigzag channel $180^{\circ}$, about 1.4 times.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.9
• /
• pp.475-482
• /
• 2009

The objectives of this paper are to study the characteristics of heat transfer and pressure drop of the zigzag channel PCHE using diffusion bonding technology by numerical analysis. PCHE of five types are designed, which are zigzag channel angle 180$^{\circ}$, 160$^{\circ}$, 140$^{\circ}$, 120$^{\circ}$ and 100$^{\circ}$. The zigzag PCHE was numerically investigated for Reynolds number in a range of 150$\sim$800. The temperatures of the hot side were performed at 80$^{\circ}$ while that of the cold side was conducted at 20$^{\circ}C$. The results show that the performance of heat transfer rate for zigzag channel 100$^{\circ}$ increases about 11.5% compared to that of zigzag channel 180$^{\circ}$. On the other hand, the performance of pressure drop for zigzag channel 100$^{\circ}$ is remarkably higher than that of zigzag channel 180$^{\circ}$, about 2.4 times.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.8
• /
• pp.1046-1055
• /
• 1997

An anisotropic k-.epsilon. turbulence model for predicting the rotating flows is proposed with the simple inclusion of a new parameter dealing with the extra straining effects in the .epsilon.-equation. This model is employed to compute the effects of Coriolis forces on fully-developed flow in a rotating channel. The predicted results indicate that the present model captures fairly well the striking rotational-induced effects on the Reynolds stresses and the mean flow distributions, including the argumentation of turbulent transport on the unstable side (pressure surface) of the channel and its damping on the stable side (suction surface).

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.5
• /
• pp.107-112
• /
• 2020

Ultra-lightweight password CHAM is an algorithm with efficient addition, rotation and XOR operations on resource constrained devices. CHAM shows high computational performance, especially on IoT platforms. However, lightweight block encryption algorithms used on the Internet of Things may be vulnerable to side channel analysis. In this paper, we demonstrate the vulnerability to side channel attack by attempting a first power analysis attack against CHAM. In addition, a safe algorithm was proposed and implemented by applying a masking technique to safely defend the attack. This implementation implements an efficient and secure CHAM block cipher using the instruction set of an 8-bit AVR processor.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2847-2858
• /
• 2021

When a nuclear reactor with rectangular fuel assemblies runs for a long time, impurities and debris may be taken into coolant channels, which may cause flow blockage, and the blocked fuel assemblies might be destroyed. Therefore, the purpose of this study is to perform a thermal-hydraulic analysis of a rectangular fuel assembly by STAR-CCM+, under the condition of one subchannel with 80% blockage ratio. A rectangular fuel assembly of the International Atomic Energy Agency (IAEA) 10 MW material test reactor (MTR) is chosen. In view of the gasket material taken into the coolant channel is close to the single side of the coolant channel, in the flow blockage accident of the Oak Ridge Research Reactor (ORRR), a new blockage category called single side blockage is attempted. The blockage positions include inlet, middle and outlet, and the blockage is set as a cuboid. It is found by simulations that the blockage redistributes the mass flow rate, and large vortices appear locally. The peak temperature of the cladding is maximum, when the blockage is located at the single side of the coolant channel inlet, and no boiling occurs in all blockage cases. Moreover, as the height of the blockage increases, the damage caused by the blockage increases slightly.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.31-39
• /
• 2008

The development of next-generation resident registration cards, financial IC cards and administrative agency IC cards based on a smart card is currently coming out in Korea. However, the low-price IC cards without countermeasures against side channel analysis attacks are expected to be used fer cost reduction. This paper has investigated the side channel resistance of financial IC cards that are currently in use and have performed DPA attacks on the financial IC cards. We have been able to perform successful DPA attacks on these cards by using only 100 power measurement traces. From our experiment results, we have been able to extract the master key used for encryption of a count PIN number.

• Journal of Korea Water Resources Association
• /
• v.49 no.11
• /
• pp.941-949
• /
• 2016

The flow characteristics of the broad-crested side weir considering the levee's side slope of main channel ($ES_{ch}$) was investigated through hydraulic experiment in order to estimate the discharge coefficient equation. For applicability to actual river, levee's side slope of main channel 1:0.5, 1:1 and 1:2 were selected. Experimental results show that the new estimated equation for the discharge coefficient including $ES_{ch}$ is reasonable and effective in actual applications by comparing estimated and measured discharge over side weirs. Through a multiple linear regression analysis the importance of variabes were ordered as $ES_{ch}$ > $h/y_u$ > $L/y_u$ > $Fr_u$. Especially the discharge coefficient equation without $Fr_u$ was suggested, and the high applicability was reviewed by comparing the measured and calculated overflow of broad-chested side weir.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.521-524
• /
• 2004

For implementation of Cryptographic algorithms, security against implementation attacks such as side-channel attacks as well as the speed and the size of the circuit is important. Power Analysis attacks are powerful techniques of side-channel attacks to exploit secret information of crypto-processors. In this thesis the FPGA implementation of versatile elliptic crypto-processor is described. Explain the analysis of power consumption of ALTERA FPGA(FLEX10KE) that is used in our hand made board. Conclusively this thesis presents clear proof that implementations of Elliptic Curve Crypto-systems are vulnerable to Differential Power Analysis attacks as well as Simple Power Analysis attacks.