• Journal of Korean Physical Therapy Science
• /
• v.22 no.1
• /
• pp.11-17
• /
• 2015

Purpose : The current study examines changes of static uprighting balance in the visual input characteristics. Method : Total 50 person(male 16, female 34) were participated in this study. They were tested with 'hole in the card' for identification of dominant eye's side, then they were divided 3 groups(both visual input group, dominant visual input group, and non-dominant visual input group). 3 groups were measured with Romberg test on the force platform device to compare the static uprighting balance characteristics ; moving distance, mean velocity, and sway area of the CoM(center of mass), during 20 seconds. Results : The results by one-way repeated measure ANOVA were as follows. In moving distance and mean velocity of CoM, non-dominant visual input group was unstable than dominant visual group and both visual input group(p<0.05). But, in sway area of CoM, significant difference was not existed statistically. Conclusion : These result can be applied to design the static uprighting balance program using visual input mediation.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.46-54
• /
• 2015

SAR is a Radar to obtain the video information using a radio wave. Platform emit the radio wave, depending backscattered waves returned from the target object the signal to the distance, to create a topographical map is recorded in two-dimensional image. In this paper, through a simulation to apply a variety of window in the SAR image processing for SAR image recovery is to study the application effect of the window, as a result, at the side of the signal of the SNR, Flattop window to improve the best performance it was confirmed to show.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1015-1022
• /
• 2010

USN(Ubiquitous Sensor Network) environment that provides the service measured from sensors in real-time the information is delivered to application service. However, domestic service, application service provider environment between providers and users, most of the research are on the service platform architecture, and process the information detected by sensors between the providers of standard services platform architecture, which is a very weak level. In this paper, we proposed new service architecture though analysis of the OGC SWE(Sensor Web Enablement) with standards and research analysis of domestic standards. And we designed and implemented to each component of provider side.

• Journal of Platform Technology
• /
• v.11 no.4
• /
• pp.80-88
• /
• 2023

To construct a learning model in the field of artificial intelligence, a dataset should be collected and be delivered to the central server where the learning model is constructed. Federated learning is a machine learning method building a global learning model without transmitting data located in a client side in a collaborative manner. It can be used to protect privacy, and after constructing a local trained model on individual clients, the parameters of the local model are aggregated centrally to update the global model. In this paper, we reuse the existing learning parameter to improve federated learning, describe incremental federated learning. For this work, we do experiments using the federated learning framework named Flower, and evaluate the experiment results with regard to elapsed time and precision when executing optimization algorithms.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.8
• /
• pp.245-250
• /
• 2014

In recent years, the developments of medical technology and emergency medical services have been changed to home from the hospital. In this regard, the researches for the prevention or early diagnosis have become actively. In particular, bio-signal monitoring is applied to a variety of u-healthcare application services. The proposed system in this paper is to provide a security technology to protect the medical information measured from the various sensors. Especially, bio-signal information is privacy-sensitive personal information that must be protected. We applied a two-dimensional code technology, QR code, for the protection and management. In the client side, it can analyze the QR code and confirm the results on devices. Finally, with this proposed platform, we show the results of application service to verify the creation and distribution of integrated image file between the bio-signal and medical image information.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1738-1748
• /
• 2019

Previous research has shown that the inclined condition has an impact on the natural circulation (natural circulation) mode operation of Floating Nuclear Power Plant (FNPP) mounted on the movable marine platform. Due to its compact structure, small volume, strong maneuverability, the Integral Pressurized Water Reactor (IPWR) is adopted as marine reactor in general. The OTSGs of IPWR are symmetrically arranged in the annular region between the reactor vessel and core support barrel in this paper. Therefore, many parallel natural circulation loops are built between the core and the OTSGs primary side when the main pump is stopped. and the inclined condition would lead to discrepancies of the natural circulation drive head among the OTSGs in different locations. In addition, the flow rate and temperature nonuniform distribution of the core caused by inclined condition are coupled with the thermal hydraulics parameters maldistribution caused by OTSG group operating mode on low power operation. By means of the RELAP5 codes were modified by adding module calculating the effect of inclined, heaving and rolling condition, the simulation model of IPWR in inclined condition was built. Using the models developed, the influences on natural circulation operation by inclined angle and OTSG position, the transitions between forced circulation (forced circulation) and natural circulation and the effect on natural circulation operation by different OTSG grouping situations in inclined condition were analyzed. It was observed that a larger inclined angle results the temperature of the core outlet is too high and the OTSG superheat steam is insufficient in natural circulation mode operation. In general, the inclined angle is smaller unless the hull is destroyed seriously or the platform overturn in the ocean. In consequence, the results indicated that the IPWR in the movable marine platform in natural circulation mode operation is safety. Selecting an appropriate average temperature setting value or operating the uplifted OTSG group individually is able to reduce the influence on natural circulation flow of IPWR by inclined condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.985-992
• /
• 2020

Edge computing is a technology that can prepare for a new era of cloud computing. Edge computing is not a remote data center where data is processed and computed, but low-latency/high-speed computing is realized by adding computing power and data processing power to the edge side close to an access point such as a terminal device or a gateway. It is possible. The types of edge computing include mobile edge computing, fog computing, and cloudlet computing. In this article, we describes existing open source platforms for implementing edge computing nodes. By presenting and comparing the structure, features of open source edge platforms, it is possible to acquire knowledge required to select the best edge platform for industrial engineers who want to build an edge node using an actual open source edge computing platform.

• Journal of Arbitration Studies
• /
• v.30 no.4
• /
• pp.121-138
• /
• 2020

The O2O services in the healthcare sector have only been in full swing for about three years, and unlike existing O2O consumer goods, the scale and scope of the dispute are more complicated due to restrictions on medical treatment. In this study, O2O service platform operators and medical institutions' roles and responsibilities were redefined as a countermeasure for resolving disputes in healthcare O2O services and the laws for changing the transaction environment. A change in institutional mechanisms was proposed. This study looked at the types of consumer disputes related to healthcare O2O services as insufficient information problems, problems in the course of medical service implementation, problems with immunity provisions for platform operators, cancellations, and non-compliance with refunds. All the information generated during transactions in the healthcare sector was extensive in scale and included the most sensitive information among personal information, stressing the importance of ensuring security. The area that started in the O2O range before the medical institution visit also proposed a plan to establish a system for the delivery of proven information as a pre-medical person. The scale and growth will grow faster, given that consumers can experience the information they want anytime, anywhere they want. However, the platform broker's role, a link player, will become more important because consumers who use the service will have their first meeting with non-face-to-face product providers. On the other hand, service providers may have side effects of misleading consumers by providing false information or misleading consumers through exaggerated advertisements. The O2O service market is expected to expand beyond distribution and dining out to the entire industry. However, since it is challenging to check accurate statistics on the detailed market, various disputes and consumer protection measures will be required for each detailed market, and comprehensive leading solutions will be essential in the future.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.5
• /
• pp.406-418
• /
• 2004

Last days, various kinds of applications and system were individually introduced into specific groups or enterprises by different objective without considering interoperability among those. However, the environment for data processing is changing rapidly in these days. And now the necessity is growing to integrate and couple applications and system in the process dimension for more flexible and quicker data processing on these application programs and system. When integrating these application programs or system, an integration based on XML is recommended as it is one of good methods which will the additional cost and satisfy the requirements of the integration. This is because the XML is not only device-independent data type which can be used any platform, but also it uses XSLT, the document conversion standard established by W3C, which allows easy data conversion from one to another type on occasion of demands. This paper studies a design and implementation of system to convert XML structure. This system shows the structure of source- side providing data and destination-side processing data with using XML schema that defines structural information of a XML document. And this system defines the structure relationship of desired form as mapping structural information and data. This system creates the XSLT document that defines conversion rule between two structures based information which is defined. The XSLT document which is created as described above will convert data to be appropriate to the structure of the destination- side. By implementing this system, it is able to apply a document into various kinds of structure without considering specific system or platform and it is able to construct XSLT document to which meaning of desired form can be given. This paper aims to offer a process conversion between documents and to improve interoperability and scalability, so that we can contribute to build XML document processing environment