• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.317-318
• /
• 2006

The towfish oi a side scan sonar is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. It used to find objects and Investigate on the seabed surface. But, recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. So, it needs various filtering technique and image processing techniques development to acquire high resolution image. Therefore, this research develops a side scan sonar using multi-beam sensors that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1135-1144
• /
• 2016

Fractal antenna arrays are geometry-based thinned arrays having multiband applications. The major challenge of these arrays is their large number of elements at higher expansion factors. This article presents the thinning of fractal antenna arrays while maintaining an appropriate balance between the side lobe level and beam width by using various quantized fractal distribution functions. A 2D square fractal antenna array and 3DSierpinski gasket antenna array are considered in this article to validate the proposed distribution functions. Nearly one third of the antenna elements are thinned in each successive iteration except in the case of a one-count distribution function. The proposed technique can simplify practical implementation and exhibits better performance for various parameters such as the side lobe level, side lobe angle, and half power beam width than fully populated fractal antenna arrays.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.80-87
• /
• 2020

The currently observed trend in car manufacturing is to increase energy-efficiency by producing lighter cars. This study examines the replacement of particular parts, specifically around the impact beam, with material composites 30% lighter than conventional steel currently used. The shape of the impact beam was determined as the trapezoidal cross-sectional area with central reinforcement, using three-point bending analysis. A prototype was fabricated based on the findings of our study and its performance was evaluated by the three-point bending analysis; 2 ply of aramid applied for its displacement. The performance of the final prototype for the door assembly was evaluated using a side-door strength test, which resulted to measured initial strength of 10.5 KN and intermediate strength of 15.6 KN. This research provides a promising solution for better impact beam manufacturing.

• Composites Research
• /
• 제30권2호
• /
• pp.158-164
• /
• 2017

섬유금속적층판은 금속 판재와 섬유 강화 플라스틱을 적층한 하이브리드 소재 중 하나다. 섬유금속적층판은 부품 경량화 측면을 고려했을 시, 뛰어난 충격흡수능력을 가지고 있기 때문에 자동차 및 항공우주 산업에서 적용 및 연구를 진행하고 있는 추세다. 특히, 자동차의 측면 도어 임펙트 빔의 경우, 기존의 금속소재에서 복합재료로 대체하기 위한 연구가 활발히 진행 중이다. 본 연구에서는 자동차의 측면 도어 임펙트 빔을 금속소재와 자기 강화형 폴리프로필렌을 적층한 섬유금속적층판으로 대체하는 것이 목표다. 3가지 종류의 임펙트 빔의 3점 굽힘 시험 수치해석을 통해 단면적 대비 굽힘 저항력의 크기를 비교하였다. 그 후, 제작 실현성을 고려하여 굽힘 저항력이 우수한 이중모자형 임펙트 빔을 순수 DP 980과 섬유금속적층판으로 제작하여 자동차 측면 도어에 설치된 모델을 상정하고 충돌 해석을 수행하였다. 결과적으로 섬유금속적층판을 사용한 임펙트 빔은 기존의 DP 980보다 무게 대비 충격 에너지 흡수 능력이 약 7배 높음을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.86-92
• /
• 2017

본 연구에서는 사이드 빔이 1차 현가장치 역할을 수행하도록 설계된 복합소재 대차프레임의 적용성 검토를 위해 동특성 해석과 성능평가를 수행하였다. 대차프레임에 적용된 소재는 GEP224 유리섬유/에폭시 프리프레그이다. 성능검증을 위해 복합소재 대차프레임의 사이드 빔의 두께를 50mm, 80mm, 150mm로 변화시키면서 강성을 조절한 모델에 대해서 주행성능을 해석적으로 평가하였다. 주행성능평가에서 사이드 빔의 두께가 80mm인 모델은 모든 성능조건을 만족하였고, 사이드 빔 두께가 50mm인 경우 역시 모든 성능조건을 만족하지만 임계속도가 요구조건에 2%정도의 여유 밖에 없어 적합하지 않았다. 사이드 빔 두께가 150mm인 모델의 경우 공차시 수직방향 승차감 지수가 기준을 만족하지 못해 부적합한 것을 확인하였다. 또한, 사이드 빔의 두께가 80mm인 모델을 제작하여 대차에 설치하고, 주행시험대 시험을 통해 임계속도를 시험적으로 평가하였다. 주행시험대 시험에서는 휠세트에 횡방향 가진을 부과하고, 목표속도까지 증속과정에서 횡방향 가진에 의한 휠세트 횡변위의 발산현상은 발생하지 않았다. 또한, 횡방향 가진이 제거된 이후 휠세트의 횡변위 역시 수렴하여 최대 임계속도는 차량 동역학 해석에서 예측된 최대 임계속도와 유사함을 확인 할 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.401-413
• /
• 2015

In this study the progressive collapse resisting capacity of a RC beam-column subassemblage with and without strengthening was investigated. Total of five specimens were tested; two unreinforced specimens, the one designed as gravity load-resisting system and the other as seismic load-resisting system, and three specimens reinforced with: (i) bonded strand, (ii) unbonded strand, and (iii) side steel plates with stud bolts. The two-span subassemblages were designed as part of an eight-story RC building. Monotonically increasing load was applied at the middle column of the specimens and the force-displacement relationships were plotted. It was observed that the gravity load-resisting specimen failed by fractures of re-bars in the beams. In the other specimens no failure was observed until the maximum displacement capacity of the actuator was reached. Highest strength was observed in the structure with unbonded strand. The test result of the specimen with side steel plates in beam-column joints showed that the force-displacement curve increased without fracture of re-bars. Based on the test results it was concluded that the progressive collapse resisting capacity of a RC frame could be significantly enhanced using unbonded strands or side plates with stud bolts.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.379-385
• /
• 2016

Door impact beam plays a key role in minimizing the occupant injury within the side impacted vehicle through preventing intrusion of the impacting vehicle. Steel pipe type door impact beam has been widely adopted since it has simple structure and the overall strength is easily determined according to the pipe size. The brackets welded at pipe ends connect the door impact beam and the door panels by spot welds. In this study, first, the effect of pipe thickness, bracket thickness and door mounting stiffness was respectively analyzed. Next, application of the tailor rolled pipe was examined and several alterations of the bracket mounting method were considered. Application of tailor rolled pipes with superior bracket mounting method showed remarkable strength enhancement and weight reduction possibility in comparison with the current door impact beam.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.21-22
• /
• 2015

The CFT(Concrete Filled Tube) system has been developed to behave well in a structural performance such as stiffness, stress, ductility, fire resistance that is derived from its mechanical advantages of composite structure. There were number of studies about unprotected CFT columns for improving their fire resistance through reinforcing bars or plates being placed inside the steel tube. It was also known that reinforcing plates of flat type need stiffeners in a certain distance to avoid their buckling failure so it cost as much as their using consequentially. This paper is planned to test the work of beam elements attached inner side of CFT depending on its shape. More discussions on beam's design could be followed after some fire tests accordingly conducted within this project.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.221-229
• /
• 2004

In this work, an elastic-plastic stress analysis has been conducted for silicon carbide fiber reinforced magnesium metal matrix composite beam. The composite beam has a rectangular cross section. The beam is cantilevered and is loaded by a single force at its free end. In solution, the composite beam is assumed perfectly plastic to simplify the investigation. An analytical solution is presented for the elastic-plastic regions. In order to verify the analytic solution results were compared with the finite element method. An rectangular element with nine nodes has been choosen. Composite plate is meshed into 48 elements and 228 nodes with simply supported and in-plane loading condations. Predictions of the stress distributions of the beam using finite elements were overall in good agreement with analytic values. Stress distributions of the composite beam are calculated with respect to its fiber orientation. Orientation angles of the fiber are chosen as $0^{circ},\;30^{circ},\;45^{circ},\;60^{circ}\;and\;90^{circ}$. The plastic zone expands more at the upper side of the composite beam than at the lower side for $30^{circ},\;45^{circ}\;and\;60^{circ}$ orientation angles. Residual stress components of ${\sigma}_{x}\;and \;{\tau}_{xy}$ are also found in the section of the composite beam.

• Structural Engineering and Mechanics
• /
• 제90권2호
• /
• pp.159-175
• /
• 2024

In order to solve the problem of calculating the reasonable completed bridge state of a self-anchored hybrid cable-stayed suspension bridge (SA-HCSB), this paper proposes an analytical method. This method simplifies the main beam into a continuous beam with multi-point rigid supports and solves the support reaction forces. According to the segmented catenary theory, it simultaneously solves the horizontal forces of the main span main cables and the stay cables and iteratively calculates the equilibrium force system on the main beam in the collaborative system bridge state while completing the shape finding of the main span main cable and stay cables. Then, the horizontal forces of the side span main cables and stay cables are obtained based on the balance of horizontal forces on the bridge towers, and the shape finding of the side spans are completed according to the segmented catenary theory. Next, the difference between the support reaction forces of the continuous beam with multiple rigid supports obtained from the initial and final iterations is used to calculate the load of ballast on the side span main beam. Finally, the axial forces and strains of each segment of the main beam and bridge tower are obtained based on the loads applied by the main cable and stay cables on the main beam and bridge tower, thereby obtaining analytical data for the bridge in the reasonable completed state. In this paper, the rationality and effectiveness of this analytical method are verified through a case study of a SA-HCSB with a main span of 720m in finite element analysis. At the same time, it is also verified that the equilibrium force of the main beam under the reasonably completed bridge state can be obtained through iterative calculation. The analytical algorithm in this paper has clear physical significance, strong applicability, and high accuracy of calculation results, enriching the shape-finding method of this bridge type.