• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.141-153
• /
• 2016

The Manjang deposit is emplaced in Hwajeonri formation comprising limestone that is interbeded with slate and phyllite in the central Okcheon Group. It consists of the Main and the Central orebody of Cu-bearing hydrothermal vein deposit and the Western orebody of iron skarn deposit. Based on coexisting mineral assemblage the skarnization can be divided into prograde skarnization (stage I : clinopyroxene ${\pm}$ magnetite ${\pm}$ quartz, stage II : garnet + clinopyroxene ${\pm}$ magnetite ${\pm}$ quartz) and retrograde hydrothermal alteration (stage III: magnetite + amphibole + quartz ${\pm}$ garnet ${\pm}$ clinopyroxene ${\pm}$ chlorite ${\pm}$ epidote ${\pm}$ fluorite ${\pm}$ calcite, stage IV: fluorite ${\pm}$ pyrrhotite ${\pm}$ chalcopyrite ${\pm}$ amphibole ${\pm}$ quartz ${\pm}$ calcite). Diopside is abundant in stage I, and hedenbergite was produced in stage II and III. Garnet compositions change from grandite to andradite, which suggests a redox transition from relatively reduced to oxidized condition during the skarn formation. Magnetite in stage I and II has relatively constant Fe contents, while in the stage III it has increased Si and Ca concentrations. This variation could indicate that magnetite was more strongly affected by host rocks during the retrograde stage. Sulfur isotope compositions of pyrrhotite and chalcopyrite produced in stage IV are within the range of + 5.9~6.9 ‰, corresponding to igneous origin, but slightly high sulfur isotope values could be attributed to an interaction with host rocks, limestone.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.456-460
• /
• 2020

In this research, a radiation detection backpack to be used discreetly or by a wide range of users was developed using array silicon-photomultiplier (SiPM) and CsI (Tl), and its characteristics were evaluated. The R-squared value, which indicates the responsiveness of a detector based on the signal intensity, was determined to be 0.981, indicating a good linear responsivity. The energy resolutions for gamma radiation energies of Co-57 (122 keV), Ba-133 (356 keV), Cs-137 (662 keV), and Co-60 (1332 keV) were found to be 13.40, 10.50, 6.77, and 3.16%, respectively. These results confirm good energy resolution characteristics. Furthermore, in the case of mixed sources, the gamma radiation peaks were readily distinguishable, and the R-squared value for energy linearity was calculated to be 0.999, demonstrating an exceptional energy linearity. Further research based on the results of this study would enable the commercialization of lightweight SiPM-based wireless radiation detection backpacks that can be used for longer durations by replacing the photomultiplier tube, which is mainly used as the optical sensor in existing radiation detection backpacks.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1760-1768
• /
• 2022

When gamma-camera sensor modules, which are key components of radiation imagers, are derived from the coupling between scintillators and photosensors, the light collection efficiency is an important factor in determining the effectiveness with which the instrument can identify nuclides via their derived gamma-ray spectra. If the pixel area of the scintillator is larger than the pixel area of the photosensor, light loss and cross-talk between pixels of the photosensor can result in information loss, thereby degrading the precision of the energy estimate and the accuracy of the position-of-interaction determination derived from each active pixel in a coded-aperture based gamma camera. Here we present two methods to overcome the information loss associated with the loss of photons created by scintillation pixels that are coupled to an associated silicon photomultiplier pixel. Specifically, we detail the use of either: (1) light guides, or (2) scintillation pixel areas that match the area of the SiPM pixel. Compared with scintillator/SiPM couplings that have slightly mismatched intercept areas, the experimental results show that both methods substantially improve both the energy and spatial resolution by increasing light collection efficiency, but in terms of the image sensitivity and image quality, only slight improvements are accrued.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.28 no.1
• /
• pp.35-40
• /
• 2024

Purpose: To improve the image quality in positron emission tomography (PET), the attenuation correction technique based on the computed tomography (CT) data is important process. However, the artifact is caused by metal material during PET/CT scan, and the image quality is degraded. Therefore, the purpose of this study was to evaluate image quality according to with and without iterative metal artifact reduction (iMAR) algorithm using customized 3D printing phantom. Materials and Methods: The Hoffman and Derenzo phantoms were designed. To protect the gamma ray transmission and express the metal portion, lead substance was located to the surface. The SiPM based PET/CT was used for acquisition of PET images according to application with and without iMAR algorithm. The quantitative methods were used by signal to noise ratio (SNR), coefficient of variation (COV), and contrast to noise ratio (CNR). Results and Discussion: The results shows that the image quality applying iMAR algorithm was higher 1.15, 1.19, and 1.11 times than image quality without iMAR algorithm for SNR, COV, and CNR. Conclusion: In conclusion, the iMAR algorithm was useful for improvement of image quality by reducing the metal artifact lesion.

• Journal of Environmental Health Sciences
• /
• v.48 no.6
• /
• pp.298-305
• /
• 2022

Background: The concentration of air pollutants as measured by the Air Quality Monitoring System (AQMS) is not an accurate population exposure level since actual human activities and temporal and spatial variability need to be considered. Therefore, to increase the accuracy of exposure assessment, the population should be considered. However, it is difficult to obtain population data due to limitations such as personal information. Objectives: The existing population defined in this study is the number of people in each region's grid. The purpose is to provide a methodology for evaluating exposure to PM_2.5 through existing population data provided by the National Geographic Information Institute. Methods: The selected study period was from October 26 to October 28, 2021. Using PM_2.5 concentration data measured at the Sensor-based Air Monitoring Station (SAMS) installed in Guro-gu and Wonju-si, the concentration for each grid was estimated by applying inverse distance weights through QGIS version 3.22. Considering the existing population, population-weighted average concentration (PWAC) was calculated and the exposure level of the population was compared by region. Results: The outdoor PM_2.5 concentration as measured through the SAMS was high in Wonju-si on all three days. Wonju-si showed an average 22% higher PWAC than Guro-gu. As a result of comparing the PWAC and outdoor PM_2.5 concentration by region, the PWAC in Guro-gu was 1~2% higher than the observed value, but it was almost the same. Conversely, observations of Wonju-si were 10.1%, 11.3%, and 8.2% higher than PWAC. Conclusions: It is expected that the Geographic Information System (GIS) method and the existing population will be used to evaluate the exposure level of a population with a narrow activity radius in further research. In addition, based on this study, it is judged that research on exposure to environmental pollutants and risk assessment methods should be expanded.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.90-98
• /
• 2004

Nano/micro-scale studies on friction properties were conducted on Si (100) and three self-assembled monolayers (SAMs) (PFOTC, DMDM, DPDM) coated on Si-wafer by chemical vapor deposition technique. Experiments were conducted at ambient temperature $(24{\pm}1^{\circ}C)$ and humidity $(45{\pm}5\%)$. Nano-friction was evaluated using Atomic Force Microscopy (AFM) in the range of 0-40nN normal loads. In both Si-wafer and SAMs, friction increased linearly as a function of applied normal load. Results showed that friction was affected by the inherent adhesion in Si-wafer, and in the case of SAMs the physical/chemical structures had a major influence. Coefficient of friction of these test samples was also evaluated at the micro-scale using a micro-tribotester. It was observed that SAMs had superior frictional property due to their low interfacial energies. In order to study of the effect of contact area on friction coefficient at the micro-scale, friction was measured for Si-wafer and DPDM against Soda Lime balls (Duke Scientific Corporation) of different radii 0.25 mm, 0.5 mm and 1 mm at different applied normal loads $(1500,\;3000\;and\;4800{\mu}N)$. Results showed that Si-wafer had higher friction coefficient than DPDM. Furthermore, unlike that in the case of DPDM, friction was severely influenced by wear in the case of Si-wafer. SEM evidences showed that solid-solid adhesion to be the wear mechanism in Si-wafer.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1545-1551
• /
• 1994

Various kinetic parameters of the nucleation and crystallization in anorthite glass (CaO.Al2O3.2SiO2) were calculated by nonisothermal differential thermal analysis. Base glass and glass with TiO2 were prepared by melting. In base glass, the temperature where nucleation can occur ranges from 85$0^{\circ}C$ to 9$25^{\circ}C$ and the temperature for maximum nucleation was 900$\pm$5$^{\circ}C$. In glass with TiO2, the nucleation temperature range was 800~875$^{\circ}C$ and the maximum nucleation temperature was 850$\pm$5$^{\circ}C$. Kissinger equation, Bansal equation, and modified Ozawa equation were used for calculating activation energy for crystallization, Ec. The results showed the same activation energies for both glasses with and without TiO2 in the different equations. The shape of maximum exotherm peak and Ozawa equation were used for Avrami exponent, n. The n value for each glass was 2, indicating that each glass crystallized primarily by bulk crystallization.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3367-3371
• /
• 2012

Objective: To investigate the effects of histone deacetylase 6 (HDAC6) siRNA on cell proliferation and cell apoptosis of the HeLa cervical carcinoma cell line and the molecular mechanisms involved. Methods: Division was into three groups: A, the untreated group; B, the control siRNA group; and C, the HDAC6 siRNA group. Lipofectamine 2000 was used for siRNA transfection, and Western blot analysis was used to determine the protein levels. Cell proliferation and apoptosis were characterized using a CCK-8 assay and flow cytometry, respectively. Results: HDAC6 protein expression in the HDAC6 siRNA-transfection group was significantly lower (P < 0.05) than in the untreated and control siRNA groups. The CCK-8 kit results demonstrated that the proliferation of HeLa cells was clearly inhibited in the HDAC6 siRNA transfection group (P < 0.05). In addition, flow cytometry revealed that the early apoptotic rate ($26.0%{\pm}0.87%$) was significantly elevated (P < 0.05) as compared with the untreated group ($10.6%{\pm}1.19%$) and control siRNA group ($8.61%{\pm}0.98%$). Furthermore, Western blot analysis indicated that bcl-2 protein expression in the HDAC6 siRNA-transfection group was down-regulated, whereas the expression of p21 and bax was up-regulated. Conclusion: HDAC6 plays an essential role in the occurrence and development of cervical carcinoma, and the down-regulation of HDAC6 expression may be useful molecular therapeutic method.

• The Journal of Korean Society of Virology
• /
• v.27 no.2
• /
• pp.227-237
• /
• 1997

In order to search for anti-Herpes simplex virus (HSV) type-1 agents from Korean medicinal herbs and Korean traditional prescriptions (herb complexes), we selected 80 medicinal herbs and 45 prescriptions, based on a review of the Korean traditional medicine books. Both methanol extracts and boiling-water extracts were tested by means of the MTT assay (tetrazolium based colorimetric assay). Ten of the 125 methanol extracts: CM-11, CM-18, CM-19, CM-21, CM-22, CM-39, MM-3, MM-18, MM-29, MM-73 (see explanation of nomenclature below), showed efficacy against HSV-1. Twelve of the water extracts: CW-2, CW-3-I, CW-3-II, CW-18, MW-3, MW-5 MW-6, MW-12, MW-47, MW-69, MW-73 and MW-79 were active. #3 (individual herb) and #73 (individual herb) were interesting because both water and methanol extracts were active. Especially, #3 is a part of composition of Hong-il-$laksamd{\check{u}}ngbang$ and Hojanghaedokt'ang which have anti-HSV-1 activitives. The SI value of MW-69 and CW-18 was relative high as $10.2{\pm}0.7$ and $11.8{\pm}2.2$. The cytotoxic effect on Vera cells of $Panch'{\check{o}}nch'onch'{\check{o}}ngbang$, Taraxacum platycarpum H. Dahlst. and acycloguanosine was determined by MTT assay. Water extracts of $Panch'{\check{o}}nch'onch'{\check{o}}ngbang$ (prescription) and Taraxacum platycarpum H. Dahlst. showed very weak cytotoxic effects on Vero cells at > $100\;{\mu}g/ml$ but acycloguanosine showed strang cytotoxic effects on Vera cells at > $100\;{\mu}g/ml$. As a result, #3, #73, MW-69 and CW-18 are considered as potentially useful for anti-HSV-1 agent and will be the focus of further research. Abbreviations: CM - methanol extracts of traditional prescriptions; CW - water extracts of traditional prescriptions; MM - methanol extracts of individual herbs; MW - water extracts of individual herbs.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1721-1732
• /
• 2020

Elementary school students spend a lot of time in a school and are more exposed to indoor air pollution. Also the students are physically growing and have a relatively high respiratory rate per unit weight compared to adults, so it is known that there is a high sensitivity to indoor air pollution. Therefore, indoor air quality in a school is becoming an important factor for the student's health. In this study, a correlation analysis using levels of indoor and outdoor Particulate Matter (PM) measured from five elementary schools in Seoul was performed to evaluate the effect of outdoor PM on indoor PM. PM ratio and indoor/outdoor (I/O) ratio were also analyzed to investigate the actual condition of indoor air quality and effect of outdoor PM on indoor PM. As a result, the correlation between indoor and outdoor PM in elementary school was more significant in PM2.5 and PM1 than PM10. In the case of I/O ratio, the I/O ratio of PM10 was higher than that of 1 in four elementary schools except SD (BB:2.21, NS: 1.67, IS: 1.73, SI: 1.17). This indicates that the activity of students has a great effect on the concentration of indoor PM10.