• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.549-556
• /
• 1993

Interfacial shear strength plays an important role in determining the mechanical properties of a fiber-reinforced ceramic composites. In this study, the effect ofinterlayer thickness on mechanical properties of Nicalon-fiber-reinforced SiC composites fabricated via polymer solution infiltration/chemical vapor infiltration (PSI/CVI) was studied. It was found that the flexural strength and fracture toughness of the composites were increased with the interlayer thickness and showed maximum value at the interlayer thickness of 0.66${\mu}{\textrm}{m}$. Typical flexural strength and fracture toughness of Nicalon-fiber-reinforced SiC composites with interlayer thickness of 0.66${\mu}{\textrm}{m}$ were 391.7$\pm$34.6MPa and 15.1$\pm$1.8MPa.m1/2, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.157-157
• /
• 2000

The adsorption processes of methyl chloride on Si(100)-2$\times$1 have been studied by low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and semiempirical PM3 calculations. The dissociative adsorption of the methyl chloride on Si(100) takes place without breaking of the silicon dimer with high efficiency. For adsorption at the room temperature, the existence of a precursor state is confirmed by the behavior of the sticking probability depending on the coverage and temperature. From AES measurements, the determined activation barrier of adsorption ($\Delta$ Hads) is -28.4 kj/mol. This results indicate that the dissociative process is nonactivated. The optimized precursor state of CH3Cl on the Si(100)-2$\times$1 surface was determined by PM3 calculations based on a cluster model.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권4호
• /
• pp.1589-1595
• /
• 2014

Objective: Forkhead box C2 (FOXC2) is a member of the winged helix/forkhead box (Fox) family of transcription factors. It has been suggested to regulate tumor vasculature, growth, invasion and metastasis, although it has not been studied in cervical cancer. Here, we analyzed FOXC2 expression in cervical tissues corresponding to different stages of cervical cancer development and examined its correlation with clinicopathological characteristics. In addition, we examined the effects of targeting FOXC2 on the biological behavior of human cervical cancer cells. Methods: The expression of FOXC2 in normal human cervix, CIN I-III and cervical cancer was examined by immunohistochemistry and compared among the three groups and between cervical cancers with different pathological subtypes. Endogenous expression of FOXC2 was transiently knocked down in human Hela and SiHa cervical cells by siRNA, and cell viability and migration were examined by scratch and CCK8 assays, respectively. Results: In normal cervical tissue the frequency of positive staining was 25% (10/40 cases), with a staining intensity (PI) of $0.297{\pm}0.520$, in CIN was 65% (26/40cases), with a PI of $3.00{\pm}3.29$, and in cancer was 91.8% (68/74 cases), with a PI of $5.568 {\pm}3.449$. The frequency was 100% in adenocarcinoma (5/5 cases) and 91.3% in SCCs (63/69 cases). The FOXC2 positive expression rate was 88.5% in patients with cervical SCC stage I and 100% in stage II, showing significant differences compared with normal cervix and CIN. With age, pathologic differentiation degree and tumor size, FOXC2 expression showed no significant variation. On transient transfection of Hela and SiHa cells, FOXC2-siRNA inhibition rates were 76.2% and 75.7%; CCK8 results showed reduced proliferation and relative migration (in Hela cells from $64.5{\pm}3.16$ to $49.5{\pm}9.24$ and in SiHa cells from $60.1{\pm}3.05$ to $44.3{\pm}3.98$) (P < 0.05). Conclusion: FOXC2 gene expression increases with malignancy, especially with blood vessel hyperplasia and invasion degree. Targeted silencing was associated with reduced cell proliferation as well as invasion potential.

• 대한방사선치료학회지
• /
• 제31권1호
• /
• pp.67-74
• /
• 2019

목 적: 폐암 환자의 정위적 체부 방사선 치료를 시행하는 동안 발생할 수 있는 표적의 움직임을 치료 중 CBCT를 사용하여 표적의 위치 변화를 재보정함으로써 긴 치료 시간에 의해 발생하는 치료 중 자세 오차를 교정하는데 목적이 있다. 대상 및 방법: 본원에서 시행한 폐암 정위적 체부 방사선 치료 시 치료 계획상 치료 Arc가 2개로 구성된 환자 14명의 데이터를 후향적으로 분석하였다. 치료 중 CBCT를 사용하여 영상을 획득하여 발생한 치료 중 자세 변화(IntraFraction Motion; IFM)를 분석하고 발생한 오차만큼 Arccheck 팬텀에 역으로 오차를 만들어 선량 분석을 실시하였다. 결 과: 첫번째 치료 중 CBCT의 Translation(x, y, z) 방향의 평균, 표준편차 그리고 최대 오차 값은 x(LR) 축에서 $0.16{\pm}0.05cm$, 0.72 cm, y(SI) 축에서 $0.2{\pm}0.14cm$, 1.26 cm, z(AP) 축에서 $0.24{\pm}0.08cm$, 0.82 cm로 나타났다. Rotation(x, y, z) 방향은 x(pitch) 축에서 $0.84{\pm}0.23^{\circ}$, $2.8^{\circ}$, y(yaw) 축에서 $0.72{\pm}0.23^{\circ}$, $2.5^{\circ}$, z(roll) 축에서 $0.7{\pm}0.19^{\circ}$, $2^{\circ}$로 나타났다. 두번째 치료 중 CBCT의 Translation(x, y, z) 방향의 평균, 표준편차 그리고 최대 오차 값은 x(LR) 축에서 $0.1{\pm}0.04cm$, 0.37 cm, y(SI) 축에서 $0.14{\pm}0.17cm$, 2 cm, z(AP) 축에서 $0.12{\pm}0.04cm$, 0.5 cm로 나타났다. Rotation(x, y, z) 방향은 x(pitch) 축에서 $0.45{\pm}0.12^{\circ}$, $1.3^{\circ}$, y(yaw) 축에서 $0.37{\pm}0.1^{\circ}$, $1^{\circ}$, z(roll) 축에서 $0.35{\pm}0.1^{\circ}$, $1.2^{\circ}$로 나타났다. IFM 값만큼 오차를 적용한 선량 비교에서 점 선량 값은 평균 $5.2{\pm}4.2%$의 차이가 발생했으며 감마 값은 $82.64{\pm}10.51%$로 나타났다. 결 론: 정위적 방사선 치료를 시행하는 폐암 환자의 있어서 치료 시간이 길어짐에 따라 발생하는 치료 중 자세오차의 크기를 줄이기 위해 개별 Arc CBCT를 사용해 추가적 자세 오차 교정을 하는 것이 치료 정확성과 효율성을 높일 것으로 사료된다.

• 한국세라믹학회지
• /
• 제29권5호
• /
• pp.357-366
• /
• 1992

Residual organics were considered as impurity in Sol-Gel method. The purpose of this study was to find the conditions to contain as much residual organics as possible in silica gel prepared from TEOS(tetraethylortho-silicate) by Sol-Gel method. Residual organics are to be expected to have reduction effect on synthesizing Si3N4 from silica gel. The results of this study are follows: 1) The maximum content of entrapped carbon was 19.8 wt.%(C/SiO2=0.25 wt.ratio) in silica gel synthesized under the conditions 1.5 fold mole water for incomplete hydrolysis, 2.5 fold mole phenol as a solvent and 0.1 fold mole HCl as a catalyst to TEOS. 2) Silica gel with organics entrapped by Sol-Gel method had a positive effect on the formation of Si3N4 compared with commercial silica gel. 3) Sintered body of synthesized $\alpha$-Si3N4 with Y2O3 and Al2O3 as additives at 175$0^{\circ}C$ in N2 atmosphere showed bending strength, 602$\pm$20 MPa and frature toughness 4.45$\pm$0.15 MPa.m1/2.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.174-179
• /
• 2000

Ultrafine particles have been used widely in many high technology industrial areas. The spherical nonagglomerated and uniform nanometer-size $SiO_2$ particles are synthesized by the direct injection of TEOS(Tetraethyorthosilicate) using electro-hydrodynamic spray ins method. Electro-hydrodynamic spray can generate in the range of submicron-size TEOS particles with high electric charge by applying a high electric field between the liquid injection nozzle and the reaction tube. This TEOS particles are thermally decomposed or oxidized to produce nanometresized $SiO_2$ particles in the reaction tube. Spherical, nonagglomerated and ultrafine particle generated and examined at furnaced temperature, $800^{\circ}C$ and TEOS flowrate of 0.49 or $1.00cm^3/hr$ using SEM and SMPS. As the total gas flowrate changes from 1.51pm to 5.01pm, the mean diameter of $SiO_2$ particle decreases from 120 nm to 68nm.

• 한국전자통신학회논문지
• /
• 제10권11호
• /
• pp.1251-1256
• /
• 2015

본 논문은 비정질 규소막 성장의 공정 조건이 저장 전극의 표면에 HSG-Si를 형성할 때 미치는 영향을 조사하였다. 그 결과 비정질 규소막의 인 농도가 $5.5{\pm}0.1E19atoms/cm^3$ 이상이면 HSG-Si가 제대로 형성되지 않는 인 농도 의존성을 나타내었다. 또한 HSG 두께가 $500{\AA}$ 이상에서는 전극과 전극을 단락시키는 비트 불량을 유발하기 때문에 비정질 규소막의 인농도는 $4.5E19atoms/cm^3$, HSG 임계 두께는 $450{\AA}$이 최적 조건임을 확인하였다.

• 분석과학
• /
• 제14권4호
• /
• pp.317-323
• /
• 2001

아크릴로니트릴을 제조하기 위한 가암모니아 산화(ammoxidation) 공정에 쓰이는 몬산토 촉매의 용해방법을 연구하였다. 실리카가 지지체인 이 촉매는 마이크로파 용해장치를 이용하여 염산, 플루오르화 수소산 및 과산화수소의 혼합산으로 녹이는 것이 가장 효과적이었다. 이 장치로 녹일 때 용기 내의 압력이 높아 안전장치가 작동될 경우, 규소는 휘발할지라도 안티몬, 몰리브덴, 철, 비스무트 및 우라늄은 휘발하지 않았다. 유도결합 플라스마 원자방출분광법으로 측정한 결과 $SiO_2$ $50.5{\pm}0.4%$, $Sb_2O_3$ $29.6{\pm}0.6%$, $UO_2$ $10.2{\pm}0.1%$, $Fe_2O_3$ $6.1{\pm}0.1%$, $MoO_3$ $0.73{\pm}0.01%$ 및 $Bi_2O_3$ $0.49{\pm}0.01%$이었으며, 기준 값과의 상대 오차는 비스무트를 제외하고 모두 ${\pm}10%$ 이내였다.

• 대한화학회지
• /
• 제26권5호
• /
• pp.320-325
• /
• 1982

황을 분석하기 위하여 준비한 용액을 이용하여 황화광석중 철, 구리, 코발트를 X-선 형광법으로 정량하였다. 시료를 $Br_2$ 와 $HNO_3$의 혼합용액으로 녹인 다음 HF로 처리하여 주성분인 $SiO_2$를 제거한 다음 용액으로 만들었다. 분석결과는 철함량이 20 ~ 50%에서 ${\pm}$1.5%, 구리 함량이 10 ~ 15%에서 ${\pm}$1.0%, 코발트함량이 1 ~ 5% 범위에서 ${\pm}$0.4% 이내로 다른 습식분석법의 data와 일치하고 있으며 재현성에 있어서도 좋은 결과를 얻었다.

• 환경영향평가
• /
• 제12권2호
• /
• pp.99-108
• /
• 2003

We collected and analyzed PM10 samples to account for the characteristics of heavy metallic elements for yellow sand and non-yellow sand during springtime of 2002 at Busan, The mean PM10 mass concentration for springtime of 2002 was $219.82{\mu}g/m^3$ with the maximum $787.50{\mu}g/m^3$ and the minimum $19.44{\mu}g/m^3$. The mean concentration of metallic elements contained in PM10 are shown as follows : Si>Ca>Fe>Al>Na, respectively. The ratio of mean PM10 mass concentration for yellow sand($362.7{\mu}g/m^3$) to that for non-yellow sand($48.3{\mu}g/m^3$) was 7.5, the significant positive correlation (P<0.05) was found between yellow sand and non-yellow sand. The metallic elements concentration ratios of yellow sand to the non-yellow sand were over 10 times for Al, Ca, Mg, 4~8 times for Fe, Si, Mn. But the concentration of Na, Cu, Zn for non-yellow sand was higher than those of yellow sand. The crustal enrichment factor of Cd, Cu, Pb, Zn, Cr, K, Mn, Na, Ni for yellow sand was higher that of non-yellow sand over 10 times, and concentration rate of soil particles of yellow sand was increased 2.3 times that of nonyellow sand.