• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.75-78
• /
• 2002

Thirty three layer $TiO_2/SiO_2$ coating mirrors with high reflectance through a 620~820nm wavelength range have been designed and fabricated by electron beam evaporation method. Multilayer films were deposited on glass(BK7) and sequentially. The high reflector design is based on alternating high and low refractive index layers. $n_H$ and $n_L$ such that a "stopband"(or area of high reflectivity) is created that is centered around the design wavelength. ${\lambda}_0$. The measured transmittance spectrum with an incident wavelength at an incident angle of $40^{\circ}{\pm}7^{\circ}$ exhibited a reflectance of 99.9% at the wavelength of 620~820nm but high peak transmittance in the wavelength region from 700 to 740nm.

• Journal of Information Technology Services
• /
• v.21 no.4
• /
• pp.27-61
• /
• 2022

In order to improve project performance by analyzing the effects of the project manager's leadership competency and the individual competency of the project participants on the project performance, this study examines the effect. In this study, a research model and hypothesis were established to understand the causal relationship between leadership competency, individual competency, and project performance, and a survey was conducted based on this. Overall, it was found that the leadership competency of the project manager and the individual competency of the project participants had a positive effect on the project management performance, the project leadership competency had a positive effect on the completion performance, and the project participant individual competency had a negative effect on the completion performance. As a result of analyzing the effect of the project manager's core competency on the project management performance according to the amount or period of the project type, which is the moderating variable, it was found that there was no moderating effect on the management performance. For the success of the SI project, it is most important to understand the project characteristics well and select a PM suitable for the characteristics, and methods for nurturing excellent project managers should be further studied. In addition, it is expected that it will be possible to identify the effect of project manager leadership competency and participant competency on project performance based on sophisticated research design for more competent PM selection.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.21-27
• /
• 2015

In this study, interfacial characteristics between SOFC and Ag paste as current collector was estimated in the high temperature environment. The Ag paste was used to connect the unit cell of SOFC strongly with interconnector and provide the electrical conductivity between them. To confirm electrical conductivity, Ag paste was treated in the furnace at $800^{\circ}C$ for 48 hours. The sheet resistance of Ag paste was measured to compare the resistance values before and after the heat treatment. Also, the four-point bending test was performed to measure the interfacial adhesion. The unit cell of SOFC and $SiO_2$ wafer were diced and then attached by Ag paste. The $SiO_2$ wafer had the center notch to initiate a crack from the tip of the notch. The modified stereomicroscope combined with the CCD camera and system for measuring the length was used to observe the fracture behavior. To compare the characteristics before heat treatment and after heat treatment, the specimen was exposed in the furnace at $800^{\circ}C$ for 48 hours and then the interfacial adhesion was evaluated. Finally, the interfacial adhesion energy quantitatively increases $1.78{\pm}0.07J/m^2$ to $4.9{\pm}0.87J/m^2$ between the cathode and Ag paste and also increase $2.9{\pm}0.47J/m^2$ to $5.12{\pm}1.01J/m^2$ between the anode and Ag paste through the high temperature. Therefore, it is expected that Ag paste as current collector was appropriate for improving the structural stability in the stacked SOFC system if the electrical conductivity was more increased.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.371-379
• /
• 1989

Peak or near-peak metamorphic temperatures and pressures for Seosan area could be estimated from major element method. Temperatures calculated from garnet-biotite geothermoneter(Ferry and Spear, 1978; Ganguly and Saxena, 1984) are $620{\pm}40^{\circ}C$ and $520{\pm}20^{\circ}C$ for Seosan and Daesan Formation respectively. Presures derived from garnet-plagiciase-$Al_2Si_O_2$-quartz geobarometer(Newton and Haselton, 1981; Ganguly and Saxena, 1984)suggest 5-6kb for both of Seosan and Daesan Formation. These results suggest that under isobaric, Seosan Formation underwent relatively high temperature metamorphism compared with Daesan Formation. Chemical zonations of garnet for major elements such as Fe, Mg, and Mn in Seosan and Dasan Formation show different patterns each other probably caused by different thermal history.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.74-84
• /
• 2005

Understandings of adsorption characteristic of interface are very important in several advanced materials processes, related to NT and BT technology. Volumetric gas adsorption method, suitable for absolute measurements, is regarded as the standardized measurement technique for specific surface area. In order to verify the reliability of commercial equipments, certified reference materials (called CRM) of specific surface area are developed and evaluated its uncertainty factors by standard equipment which has traceability to SI units. Specific surface areas of developed materials are $10.72{\pm}0.46m^2g^{-1}$ for silicon nitride powders and $149.50{\pm}3.44m^2g^{-1}$ for alumina. These disseminations of CRMs would result in improved reliability chains in industrial processes, and lead eventually to contribution to productivity improvement, quality management, safety evaluation, and possibly to new material development.

• Mycobiology
• /
• v.28 no.1
• /
• pp.27-32
• /
• 2000

The ectomycorrhizal roots were collected from the soils around the bases of basidiocarps of the four edible mushrooms in the stands of Pinus densiflora or Querus acutissima communities (Mt. Wol-Ak in Eastern Chung-Puk): The basidiocarps of Tricholoma matsutake (TM), Sarcodon asparatus (SA), S. imbricatum (SI), and Polyozellus multiplex (PM) are usually collected. The ectomycorrhizal roots of TM, PM and SI were related to the roots of P. densiflora, but the other to the roots of Q. acutissima in Korea. Particularly, the basidiocarps of PM were collected in the mixed stand of both P. densiflora and Q. acutissima. The morphologies of the ectomycorrhizal roots were observed to be the yellowish brown coral (dichromatous) or pyramid types in the roots of the pine, but dark brown un-branched sticks (roots) in the ends of ectomycorrhizal roots of Querus plants. The un-branched roots were covered with the dark mycelia (rhizomorph) around them. Therefore, the ectomyorrhizal roots of PM were observed to have two kinds of types; The single blackish un-branched roots were observed to be attached to the yellowish coral type roots. The bundles of TM mycelia were filled with cortical cells (in the roots of P. densiflora), but the mycelia of the other fungi (Aphylloporales) were massed between the cortical cells of P. densiflora or Q. acutissima. Their anatomical and gross features were considered to be simailar but very important in the ectomycorrhizal roots for these edible mushrooms.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.57-66
• /
• 1988

A series of experiments is performed to measure radon concentration in the near-surface soil gas at the four locations (Cheju-Si, Seoguipo-Si, Taejeong-eup, Seongsan-eup) in Cheju Island, using CR-39 detectors placed inside radon cups. Two types of radon cups are installed in shallow holes of about 15 cm in diameter and 50cm in depth. The optimum etching conditions, i.e., the concentration of NaOH solution, etchant temperature and etching time, are found to be 625N, $70^{\circ}C$ and 5.5 hours for CR-39 detectors. A typical conversion factor of radon cup is calculated as $$1track/mm^3{\cdot}30day=0.059Bq/{\ell}$$. Average radon concentrations over 30 days measured in Cheju Island from May 1, 1987 to April 23, 1988 are $3.1{\pm}0.3Bq/{\ell}$ for open radon cups and $1.7{\pm}0.2Bq/{\ell}$ for closed radon cups.

• Clean Technology
• /
• v.24 no.4
• /
• pp.301-306
• /
• 2018

Recently, due to the increase in the fine dust, regulations on PM generated from diesel cars are strengthened. There is a growing interest in diesel particulate filters (DPFs), a post-treatment device that removes exhaust gases from diesel vehicles. Therefore, one of the enhancements of the DPF efficiency is to reduce the pressure drop in the DPF, thereby increasing the efficiency of the filter and regeneration. In this study, the effect of cell density, channel shape, wall thickness, and inlet channel ratio of 5.66" SiC and Cordierite DPF on the pressure drop in DPF was investigated using ANSYS FLUENT simulator. As a result of the experiment, the pressure drop was smaller at 300 CPSI than 200 CPSI, and the anisotropy and O / S cell showed less than Isotropy by pressure drop of about 1,000 Pa. As the porosity increased by 10% the pressure drop was reduced by about 300 Pa and as the wall thickness increased by 0.05 mm, the pressure drop was increased by about 500 Pa.

• Journal of the Korean Society of Radiology
• /
• v.3 no.3
• /
• pp.5-11
• /
• 2009

When using Image Guided Radiation Therapy, the patient is placed using skin marker first and after confirming anatomical location using OBI, the couch is moved to correct the set up. Evaluation for the error made at that moment was done. Through comparing $0^{\circ}$ and $270^{\circ}$ direction DRR image and OBI image with 2D-2D matching when therapy planning, comparison between patient's therapy plan setup and actual treatment setup was made to observe the error. Treatment confirmation on important organs such as head, neck and spinal cord was done every time through OBI setup and other organs such as chest, abdomen and pelvis was done 2 ~ 3 times a week. But corrections were all recorded on OIS so that evaluation on accuracy could be made through using skin index which was divided into head, neck, chest and abdomen-pelvis on 160 patients. Average setup error for head and neck patient on each AP, SI, RL direction was $0.2{\pm}0.2cm$, $-0.1{\pm}0.1cm$, $-0.2{\pm}0.0cm$, chest patient was $-0.5{\pm}0.1cm$, $0.3{\pm}0.3cm$, $0.4{\pm}0.2cm$, and abdomen was $0.4{\pm}0.4cm$, $-0.5{\pm}0.1cm$, $-0.4{\pm}0.1cm$. In case of pelvis, it was $0.5{\pm}0.3cm$, $0.8{\pm}0.4cm$, $-0.3{\pm}0.2cm$. In rigid body parts such as head and neck showed lesser setup error compared to chest and abdomen. Error was greater on chest in horizontal axis and in AP direction, abdomen-pelvis showed greater error. Error was greater on chest in horizontal axis because of the curve in patient's body when the setup is made. Error was greater on abdomen in AP direction because of the change in front and back location due to breathing of patient. There was no systematic error on patient setup system. Since OBI confirms the anatomical location, when focus is located on the skin, it is more precise to use skin marker to setup. When compared with 3D-3D conformation, although 2D-2D conformation can't find out the rolling error, it has lesser radiation exposure and shorter setup confirmation time. Therefore, on actual clinic, 2D-2D conformation is more appropriate.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.4
• /
• pp.207-217
• /
• 2011

Here we report major element composition, trace and rare earth element abundance, Sm-Nd and Rb-Sr isotopic composition from Deokgu leucogranite. Chondrite-normalized REE pattern and its Eu anomaly are divided into 3 types systematically, and have close relationship with $SiO_2$ contents. Such geochemical characteristic indicates that the leucogranite was derived by feldspar fractionation from a common source magma. Sm-Nd and Rb-Sr whole rock ages are $1,785{\pm}180Ma$ (initial $^{143}Nd/^{144}Nd\;ratio=0.51003{\pm}0.00016,\;2{\sigma}$; ${\varepsilon}_{Nd}(T)=-5.9$) and $1,735{\pm}260Ma$ (initial $^{87}Sr/^{86}Sr\;ratio=0.702{\pm}0.046,\;2{\sigma}$), respectively. Initial ${\varepsilon}_{Nd}$ value indicates that the magma should be derived from the crustal material. This initial ${\varepsilon}_{Nd}$ value also corresponds well with those from the Precambrian granitoids from North-China Craton rather than those of South-China Craton.