• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.327-328
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation - reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that alumina-oriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.455-456
• /
• 2006

We have demonstrated that textured $Al_2O_3-mullite-SiC$ nanocomposites can be fabricated by slip casting followed by partial oxidation. reaction sintering of mixed suspensions of $Al_2O_3$ and SiC powders in a high magnetic field. The sintered density was changed by the degree of oxidation at 1200C and 1300C. The degree of orientation of alumina in the nanocomposite was examined on the basis of the X-ray diffraction patterns and scanning electron micrographs. It is confirmed that aluminaoriented nanocomposites were fabricated. The three-point bending strength at room temperature was observed for the nanocomposites.

• Journal of the Optical Society of Korea
• /
• v.11 no.1
• /
• pp.34-39
• /
• 2007

Laser-induced breakdown of colloidal suspensions, such as polystyrene, $ZrO_2$, and $SiO_2$ particles in diameters of 100-400 nm in water is investigated by nanosecond flash-pumped Nd:YAG laser pulses operating at a wavelength ${\lambda}$= 532 nm. The breakdown threshold intensity is examined in terms of breakdown probability as a function of laser pulse energy. The threshold intensity for $SiO_2$ particles ($1.27{\times}10^{11}\;W/cm^2$) with a size of 100 nm is higher than those for polystyrene and $ZrO_2$ particles with the same size, namely $5.7{\times}10^{10}$ and $5.5{\times}10^{10}\;W/cm^2$, respectively. Results indicate that the absorption of five photons is required to induce ionization of $SiO_2$ particles, whereas the other particles necessitate four-photon absorption. These breakdown thresholds are compared with those measured by nanosecond pulses from a diode-pumped Nd:YAG laser having a different focusing geometry.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.569-574
• /
• 2001

The crystal structure, surface morphology and preferred orientation of the copper electrodeposit were investigated by the using sulfate bath with $SiO_2$suspensions and the cathode substrate Au sputtered. As by the addition of colloidal silica in copper electrolytic bath and Au pre-coating on substrate, the crystal particles of deposits was fined-down, made uniform and the account of particles were increased. Hardness of copper electrodeposits with colloidal silica increased about 15% in comparison with that of pure copper deposit film and (111), (200) and (311) plane of X-ray diffraction patterns were almost swept away, so preferred orientation of the copper deposits changed from (111) to (110) plane by codeposit $SiO_2$ and precoating the substrate.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.210-219
• /
• 1999

The fundamental dispersion property of Si2N4 and a combination of AlN and Nd2O3 as sintering additives in a variety of organic solvents such as alcohols, hydrocarbons, ketones, and ethers was investigated. The stabilization mechanism and interaction between organic functional groups of the various organic additives were studied to clarify the dispersibility of the ceramic particles in the nonaqueous suspending medium. characterization of the suspensions was based mainly on electrokinetic sonic amplitude(ESA) measurements and the flow curves obtained from the rheological studies as well as estimated Hamaker constants. It was found that the contribution of electrostatic repulsive forces to the Si3N4, AlN and Nd2O3 stabilization in organic media is appreciably greater than anticipated and is dependent on the physicochemical properties of organic solvents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.1-11
• /
• 2016

The effect of the migration of nanoparticles near the wall of a channel on the convective heat transfer in a laminar flow of $SiO_2$ nanoparticle suspensions (nanofluids) under constant wall heat flux boundary conditions was numerically and experimentally investigated in this study. The dynamic thermal conductivity of the aqueous $SiO_2$ nanofluids was measured using T-type thermocouples attached to the outer surface of a stainless steel circular tube (with a length of 1 m and diameter of 1.75 mm). The nanofluids used in this study were synthesized by dispersing $SiO_2$ spherical nanoparticles with a diameter of 24 nm in de-ionized water (DIW). The enhancement of the thermal conductivity of the nanofluids (e.g., an increase of up to 7.9 %) was demonstrated by comparing the temperature profiles in the flow of the nanofluids with that in the flow of the basefluids (i.e., DIW). However, this trend was not demonstrated in the computational analysis, because the numerical models were based on continuum assumptions and flow features involving nanoparticles in a stable colloidal solution. Thus, to explore the non-continuum effects, such as the modification of the morphology caused by nanoparticle-wall interactions on the heat exchanging surfaces (e.g., the isolated and dispersed precipitation of the nanoparticles), additional experiments were performed using DIW right after the measurements using the nanofluids.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.413-418
• /
• 2001

We investigated change of crystal structure, surface morphology and crystal orientation of the electrodeposited film from dispersed $SiO_2$ suspensions (colloidal silica) copper sulfate bath and arse corrosion potentials and physical specific properties. As addition of colloidal silica in copper electrolytic hath, the crystal Particles on filial was fined-down, made uniform and account of particles were increased. Hardness of copper electrodeposited film ascended about 15% and (111), (200) and (311) plane of X-ray diffraction patterns were almost swept away, so preferred orientation chanced from (111) to (110) plane. Also, corrosion potential of electrodeposited copper film was noble with colloidal silica addition.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.4
• /
• pp.321-325
• /
• 1986

A laboratory experiment was conducted to investigate silica solubility in soil with specific reference to the characteristics of iron refinery slag and wollastonite. The results are as follows; 1. The slilia concentrations successively extracted by distilled water and N-NaOAc (pH 4.0) in soil treated with the two silicate fertilizers, is higher in iron refinery slag than in wollastonite, while the pH values of soil-fertilizer suspensions successively extracted by distilled water were the opposite. 2. Silica concentrations due to increasing of fertilizer application were decreased in iron refinery slag-soil suspensions but the concentrations were increased in wollastonite-soil suspensions. 3. The amounts of silica adsorbed in different pH of soil suspension were maximized under the condition maintained pH of near to 9.4.