• 한국표면공학회지
• /
• 제20권2호
• /
• pp.49-59
• /
• 1987

The properties of $Cr_2O_3-Al_2O_3-SiO_2$ composite oxide coatings on steel surface were investigated. The results obtained were as follows: The microhardness of oxide coating layer increased with increasing heat-treatment temperature and $Cr_2O_3$ content in coating layer. The hardness showed the highest value (850Hv) treated at 700$^{\circ}C$ for $SiO_2:Al_2O_3:Cr_2O_3$=1:1:4. Increasing heat-treatment temperature, corrosion current density became lower and coating layer became denser. The corrosion current density showed the lowest value $(6.5{\times}10^{-5}\;Acm^2)$ treated at 750$^{\circ}C\;for\;SiO_2:Al_2O_3:Cr_2O_3$=1:1:3. These results were explained by protective layer which was formed during heat-treatment. The bonding between matrix and coating layer is expected to be made mechanically and chemically by the inter diffusion of Ni and Fe. The composite oxide coating was formed by softening of the binder with increasing heat-treatment temperature. The strengthening of coating layer is to be resulted from the dispersion of major oxide particles.

• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.38-44
• /
• 2017

PURPOSE. The objective of this study was to investigate the effect of surface treatments on microtensile bond strengths (MTBSs) of two types of indirect resin composites bonded to a conventional direct resin composite. MATERIALS AND METHODS. Indirect resin composite blocks of Ceramage and SR Nexco were prepared in a plastic mold having a dimension of $10{\times}10{\times}4\;mm$. These composite blocks were divided into three groups according to their surface treatments: Group1: Sandblast (SB); Group2: Sandblast and ultrasonically clean (SB+UL); Group3: Sandblast plus silane (SB+SI). After bonding with direct resin composite, indirect-direct resin composite blocks were kept in distilled water for 24 hours at $37^{\circ}C$ and cut into microbars with the dimension of $1{\times}1{\times}8\;mm$. Microbar specimens (n = 40 per group) were loaded using a universal testing machine. Failure modes and compositions were evaluated by SEM. The statistical analyses of MTBS were performed by two-way ANOVA and Dunnett's test at ${\alpha}=.05$. RESULTS. Surface treatments and brands had effects on the MTBS without an interaction between these two factors. For SR Nexco, the MTBSs of SB and SB+SI group were significantly higher than that of SB+UL. For Ceramage, the MTBSs of SB and SB+SI were significantly higher than that of SB+UL. The mean MTBS of the Ceramage specimens was significantly higher than that of SR Nexco for all surface treatments. CONCLUSION. Sandblasting with or without silane application could improve the bond strengths of repaired indirect resin composites to a conventional direct resin composite.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.283-293
• /
• 2019

우주공간, 고에너지 플라즈마, 방사선 조사 환경과 같은 극한환경에서의 응용 분야가 증가함에 따라 더 높은 용융점 및 기계적 강도, 열전도도의 향상을 필요로 하는 재료에 대한 수요가 계속적으로 증가하고 있다. 이에 따라 대표적인 내열 소재인 탄소-탄소 복합체의 내산화/내삭마 특성을 개선하기 위하여 초고온 세라믹스를 이용하는 방법에 대하여 리뷰하였다. 초고온 세라믹스를 합성하는 가장 간단한 방법인 CVD 코팅법과 다른 코팅법인 pack cementation, 용사법의 장단점을 서로 비교하였다. 복잡한 형상의 C/C 복합체에 CVD 코팅법을 적용하기 위한 방법으로 열역학 계산 및 CFD 시뮬레이션의 활용 가능성을 제안하였다. 또한 이런 방법을 통하여 제작한 TaC/SiC 이중 층 코팅과 TaC/SiC 다중 층 코팅의 내산화 특성을 비교한 결과, 다중 층 코팅을 적용하였을 때 더 뛰어난 내산화성을 보이는 것을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.148-153
• /
• 2007

The effect of silicon carbide (SiC) and graphite fillers incorporation on the abrasive wear behaviour of glass-vinyl ester (G-V) composites have been investigated. The three-body abrasive wear behaviour was assessed by rubber wheel abrasion tests (RWAT). The worn surfaces were examined using scanning electron microscopy (SEM). The addition of SiC and graphite fillers in G-V composite improves the abrasion resistance under different loads/abrading distances. The SEM studies indicate the reasons for failure of composites and influencing parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.41-53
• /
• 1994

In this paper, rotating-bending fatigue tests of the SiC-whisker- reinforced 6061-T6 aluminum alloy and 6061-T6 alumiunm alloy made by power metallurgy were carried out to investigate the fatigue characteristics of plain and notched specimens at room temperature. The fatigue mechnisms in both materials were clarified through successive surface observations using the plastic replica method. In the case of the SiC-whisker-reinforced composites, there are whisker rich and poor zones and the fatigue crack is nucleated from the end of whiskers near the boundary. On the other hand, in the case of the 6061-T6 aluminum alloy, the fatigue crack is nucleated from defects and propagates by shear. Moreover, the results were discussed based on linear notch mechanics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.166-172
• /
• 2000

Friction characteristics of phenolic resin-based friction composites containing threedifferent relative amounts of graphite and zirconium silicate were investigated by using a pad-on-disk type friction tester. Constant temperature test and constant interval test at three different initial temperatures(100. 200, 300$^{\circ}C$) were performed to examine the effects of friction heat on friction characteristics at elevated temperature. The friction composite(FMO.7) with higher content of ZrSiO$_4$showed unstable friction force at higher temperature and resulted in larger fluctuations of vibration during friction test. The abrasive action of ZrSiO$_4$in friction composite impeded stable transfer film and induced higher friction heat at friction interface. Friction oscillations according to the temperature were associated with the formation of transfer film(i'd body layer) on the friction composite and the counter part.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.298-302
• /
• 2010

We report the effect of surface morphology on the conductivity of the poly-N-vinylcarbazole (PVK)/silica gel ($SiO_2$) nanocomposites as a function of $SiO_2$ weight percentage (%).The polymerization of PVK was initiated by a free-radical polymerization. The surface morphology of the prepared composite shows the incorporation of $SiO_2$ in the prepared PVK-$SiO_2$ (PS) nanocomposites. The conductivity increased from $9.2{\times}10^{-5}S\;cm^{-1}$ to $9.6{\times}10^{-4}S\;cm^{-1}$ with the increase in the percentage of silica gel from 5 to 30%. The nanocomposites show a percolation behavior having a threshold value between 15 and 20%.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.985-994
• /
• 1996

The initiation and growth of $\alpha$-Al2O3/metal composites by the directed oxidation of molten commercial AlZnMg-alloy at 1223-1423K were investigated. Spontaneous bulk growth did not occur on the alloy alone. but the uniform initiation and growth of the composite were obtained by putting a thin layer of SiO2 particles on the surface of the alloy. Without SiO2 the external surface of the oxide layer was convered by MgO and MgAl2O4. But with the SiO2 reaction initiate the porous ZnO layers were found on the growth surface. The higher process temperature yielded a lower metal content. The oxidation product of $\alpha$-Al2O3 was found to be oriented with c-axis parallel to th growth direction. The growth rates increased with temperature and the apparent activation energy was 111.8 kJ/mol.

• 공업화학
• /
• 제7권6호
• /
• pp.1034-1042
• /
• 1996

DCCA로 1-도데카놀을 이용한 수식 졸-겔법에 의한 $TiO_2-SiO_2$계분체를 합성하였으며, 이들 합성분체에 대한 characterization과 광활성촉매에 대해 검토하였다. $500^{\circ}C$까지의 감량변화는 TiO2단독분체가 33.0wt%, $TiO_2/SiO_2$의 몰비가 75/25, 50/50 및 25/75인 분체는 각각 67.0wt%, 70.0wt% 및 73.0wt%, 그리고 $SiO_2$단독분체는 42.5wt%이였다. 이들 탈리는 거의 대부분이 유기물질이였다. 합성직후의 분체는 $TiO_2$단독분체를 제외하고는 무정형화합물이였고, 아나타아제의 루틸로의 상전이는 $SiO_2$에 의해 억제되었다. 합성직후의 분체는 입자의 형태가 관찰되지 않았으나, $600^{\circ}C$, 1시간 가열에 의한 $TiO_2$단독분체, $TiO_2/SiO_2$의 몰비가 75/25 및 50/50인 분체는 모두 서브미크론의 입자를 보였으며, 몰비가 25/75의 분체 및 $SiO_2$단독분체는 여전히 벌크상태였다. 비표면적 역시 $SiO_2$의 증가와 함께 증가하였으며, 세공크기 역시 $SiO_2$성분에 의존하였다. 그리고 이들 가열물의 광촉매활성은, $TiO_2/SiO_2$의 몰비가 75/25인 분체의 경우, 수소발생량으로 $0.240{\mu}mol/h.g-cat.$을 나타내었으며, $TiO_2$단독분체의 그것보다는 약 2.6배, 표준광촉매물질인 P-25(Degussa P-25)보다는 약 2.0배 가량 큰 값을 나타냈다.

• 한국전기전자재료학회논문지
• /
• 제24권10호
• /
• pp.834-838
• /
• 2011

This research shows the electrical characteristic using excellent epoxy nano-composite of MgO 5.0 wt% and $SiO_2$ 0.4 wt% in mechanical strength test depending on nano-additive. First of all, volume resistance depending on nano-additive and temperature using high resistance meter (HP. 4329A) by increasing 10, 100, 1,000 V of applying voltage was measured. Moreover, temperature range of $25{\sim}120^{\circ}C$ with virgin sample was tested using TO-9B oven by Ando Company. The result showed that virgin and the samples added with MgO and $SiO_2$ had similar value of volume resistance in low temperature and low electric field region and reduced with slow slope. The nano-composite's volume resistance of sample added with MgO and $SiO_2$ had higher value than virgin sample's volume resistance in high temperature region more than $80^{\circ}C$. Moreover, the slope has steeply reduced. The volume resistance of sample added with MgO 5.0 wt% was $8.38{\times}10^{13}\;{\Omega}{\cdot}cm$ and it was 6.8 times more than virgin sample in high temperature at $120^{\circ}C$. The insulation characteristics were constant although filler has changed in low temperature region. But, in high temperature region, the value of volume resistance of sample with MgO 5.0 wt% was 7.6 times more than the virgin sample's volume resistance.