• Composites Research
• /
• 제26권6호
• /
• pp.337-342
• /
• 2013

나노입자를 이용하여 강화 효과를 높이기 위해서는 고분자 기지 내부의 균일한 분산 상태를 확보하여야 한다. 또한 균일분산 조건 확보 후 균일 분산상태를 증명할 평가자료가 필요하다. 본 연구는 에폭시 수지와 SiC 나노입자를 혼합한 SiC/에폭시 복합 수지를 제조할 경우 커패시턴스 측정법을 이용한 강화재 분산도 예측 연구를 진행하였다. 커패시턴스는 전기용량을 의미하며 측정 재료의 내부 전하량과 비례한다. 기존 에폭시 수지에 비해 나노 SiC 입자를 함유할 경우 전하량이 증가되는 이론을 바탕으로 구간별 커패시턴스 측정에 따른 분산도 평가를 진행하고, 커패시턴스 분산도 예측방법에 대한 타당성을 FE-SEM과 물리적 강도 증가 방법으로 평가하였다. 소니케이션 분산 방법과 교반기 분산 방법을 이용하여 분산 방법에 따른 SiC 나노입자 분산도 상태를 비교하였다. 인장강도와 커패시턴스 간의 상관관계가 있었으며, 파단면에 대한 비교를 할 때 분산성 향상에 대한 차이를 확인할 수 있었다.

• Carbon letters
• /
• 제8권2호
• /
• pp.91-94
• /
• 2007

The application of Carbon and graphite based materials in unprotected environment is limited to a temperature of $450^{\circ}C$ or so because of their susceptibility to oxidation at this temperature and higher. To over come these obstacles a low cost chemical vapour reaction process (CVR) was developed to give crystalline and high purity SiC coating on graphite and isotropic C/C composite. CVR is most effective carbothermal reduction method for conversation of a few micron of carbon layer to SiC. In the CVR method, a sic conversation layer is formed by reaction between carbon and gaseous reagent silicon monoxide at high temperature. Characterization of SiC coating was carried out using SEM. The other properties studied were hardness density and conversion efficiency.

• Tribology and Lubricants
• /
• 제4권2호
• /
• pp.44-51
• /
• 1988

Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.309-312
• /
• 2008

Two different anode composite materials comprising of Fe, Cu and Si prepared using high energy ball milling (HEBM) were explored for their capacity and cycling behaviors. Prepared powder composites in the ratio Cu:Fe:Si = 1:1:2.5 and 1:1:3.5 were characterized through X-Ray diffraction (XRD) and scanning electron microscope (SEM). Nevertheless, the XRD shows absence of any new alloy/compound formation upon ball milling, the elements present in Cu(1)Fe(1)Si(2.5)/Graphite composite along with insito generated Li2O demonstrate a superior anodic behavior and delivers a reversible capacity of 340 mAh/g with a high coulombic efficiency (98%). The higher silicon content Cu(1)Fe(1)Si(3.5) along with graphite could not sustain capacity with cycling possibly due to ineffective buffer action of the anode constituents.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.486-491
• /
• 2006

A new $TiN-Ti_5Si_3$ bulk composite was synthesized from preceramic, inorganic polymer (methylpolysilsesquioxane) and $TiH_2$ filler powders via polymer pyrolysis. Using this process, ceramics with high melting points can be produced relatively easily to a near net shape. The $TiN-Ti_5Si_3$ composite oxidized slowly during heating to $1000^{\circ}C$. During heating at the temperatures of at 700 and $800^{\circ}C$, TiN oxidized to Rutile-$TiO_2$ whereas $Ti_5Si_3$ resisted to oxidation. The oxide scale formed consisted primarily of $TiO_2$ containing $Ti_5Si_3$.

• 대한기계학회논문집A
• /
• 제40권11호
• /
• pp.927-933
• /
• 2016

고체 추진 기관에서 로켓 노즐은 고온 연소가스에 노출된다. 따라서 고온에서 기능을 발휘할 수 있는 적절한 재료의 선택이 중요하다. 탄소 섬유 강화 실리콘 카바이드 복합재(C/SiC)가 로켓 노즉목에 적용을 위해 연구되어 왔다. 그러나 전형적인 구조 재료들과 비교할 때 C/SiC 복합재는 준취성 거동을 가지고 고온에서 산화의 영향으로 인해 강도와 인성 관점에서 상대적으로 취약한 점이 있다. 그러므로 실제 적용을 위해 C/SiC 복합재의 열, 기계적인 특성을 평가하는 것은 중요하다. 본 논문에서는 액화 실리콘 용침(LSI) 공정을 통해 만들어진 C/SiC 복합재의 고온에서의 파괴 거동을 조사하는 실험적인 방법을 설명한다. 특히 온도와 하중, 산화 조건 그리고 탄소 섬유의 방향을 주요 변수로 설정하여 파괴 특성을 조사하였다. 파단면 분석은 SEM 촬영을 통하여 수행하였다.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.665-670
• /
• 2016

Prevailing dissemination of machine tools and cutting technology have caused drastic developments of high speed dry machining with work materials of high hardness, and demands on the high-hardness-materials with high efficiency have become increasingly important in terms of productivity, cost reduction, as well as environment-friendly issue. Addition of Si to TiAlN has been known to form nano-composite coating with higher hardness of over 30 GPa and oxidation temperature over $1,000^{\circ}C$. However, it is not easy to add Si to TiAlN by using conventional PVD technologies. Therefore, Ti-Al-Si-N have been prepared by hybrid process of PVD with multiple target sources or PVD combined with PECVD of Si source gas. In this study, a single composite target of Ti-Al-Si was prepared by powder metallurgy of MA (mechanical alloying) and SPS (spark plasma sintering). Properties of he resulting alloying targets were examined. They revealed a microstructure with micro-sized grain of about $1{\sim}5{\mu}m$, and all the elements were distributed homogeneously in the alloying target. Hardness of the Ti-Al-Si-N target was about 1,127 Hv. Thin films of Ti-Al-Si-N were prepared by unbalanced magnetron sputtering method by using the home-made Ti-Al-Si alloying target. Composition of the resulting thin film of Ti-Al-Si-N was almost the same with that of the target. The thin film of Ti-Al-Si-N showed a hardness of 35 GPa and friction coefficient of 0.66.

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.696-704
• /
• 1991

ZrO2-Toughened Alumina-Ceramics (ZTA) with SiC Whisker as dispersive additive were prepared by pressureless sintering at 1$600^{\circ}C$ and 1$650^{\circ}C$ and by HIPing at 1$600^{\circ}C$ in Ar atmosphere. Effects of SiC-Whisker addition on microstuructural, mechanical, and thermal properties were investigated and the toughening mechanisms between theory and experiment were compared. Specimens with 15 vol% Whisker prepared by HIPing showed 8.26 MPa.ma1/2 in fracture toughness and 600 MPa in flexural strength owing to contribution of the three mechanisms such as crack deflection, whisker bridging and whisker pullout in spite of difference between the theoretical and experimental values due to the partial inhomogeneous dispersion of SiC-Whisker in the matrix and the processing flaw.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.865-872
• /
• 1995

Ultra-fine $\beta$-SiC powders were fabricated by self-propagating high temperature synthesis process (SHS) using microwave oven. The flexural strength, fracture toughness, and hardness of hot pressed sample at 200$0^{\circ}C$ for 60 min using synthesized SiC powders, which had 2 wt% of Al2O3 and 2.5 wt% of B4C content, showed 438 MPa, 4.15MPa.m1/2 and 28 GPa, respectively. The highest strength, fracture toughness, and hardness of composites containing 4wt% of Al2O3, which had highest relative density of 99.9%, showed 458 MPa, 4.6MPa.m1/2 and 36.2 GPa, respectively.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.237-239
• /
• 2002

The effect of particle sizes of the metal matrix composites containing 10 wt.%SiCp was investigated with using various tools. The results showed that tool life decreased considerably with increasing particle size and cutting speed. The wear resistance of TiC-coated tools was considerably higher than that of the other tools. It was observed that abrasive wear was the main responsible mechanism for wear of the tool thermal cracks were at high speed while a built-edge formation was also evident at lower speed.