• 대한수학회보
• /
• 제47권6호
• /
• pp.1131-1138
• /
• 2010

In the present paper, we evaluate an analytic formula as a solution of Susceptible Infective (SI) model problem for communicable disease in which the daily contact rate (C(N)) is supposed to be varied linearly with population size N(t) that is large so that it is considered as a continuous variable of time t. Again, we introduce some Lie group of operators to make an extension of above analytic formula of the determin-istic epidemics model problem. Finally, we discuss some of its particular cases.

• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.61-65
• /
• 1985

$BaTiO_3$ powders doped with $BaTiO_3$ and $Nb_2O_5$ at 9$0^{\circ}C$ for 1hr. were synthesized by Direct Wet Process. These powders were very homogeneous and fine particle size. To obtain the highe PTCR effect AST($1/3Al_2O_3$.$3/4SiO_2$.$1/4TiO_2$) and $MnO_2$ were added in the semiconduc-ting $BaTiO_3$. In this case $Bi_2O_3$ and $MnO_2$ were used in the form of $Bi(NO)_3$ and $MnCl_2$.$4H_2O$ solution for Direct Wet Process. $BaTiO_3$ doped Nb2O5 and $MnO_2$ demostrated greater PTCR effect than $BaTiO_3$ doped $Nn_2O_5$ only.

• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.107-114
• /
• 1993

Zinc-Borosilicate(ZnO 65.0wt%, B2O3 21.5wt%, SiO2 9.0wt%, PbO or tiO2 4wt%) passivation glasses were studied using differential thermal analysis(DTA), scanning electron microscopy(SEM) observations, X-ray diffraction (XRD) patterns and measurement of thermal expansion coefficients. Passivation glasses containing 4wt% TiO2 and 4wt% PbO had crystallization temperature of 680~73$0^{\circ}C$ and major crystalline phases were identified by X-ray diffraction as $\alpha$-ZnO.B2O3 and $\alpha$-5ZnO.2B2O3. As increasing firing temperature, the size of crystalline phases increased by observation of SEM. The thermal expansion coefficient of crystallized glass frits was smaller than that of unfired glass.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.118-125
• /
• 1991

Acoustic microscopy has attracted much interest recently as potential nondestructive evaluation technique for detecting and sizing defects of surface and sub-surface. Also acoustic emission testing method has been developed for detecting microcracks which is more than 30${\mu}m$ in length quantitatively on ceramics. In the present paper, acoustic emission during the four point bending test in hot-pressed sintered $Si_3N_4$ specimen which was stressed by thermal shock, has been measured by high sensitive sensing system. The surface and sub-surface cracks were detected by scanning acoustic micrscope of 800 MHz and conventional ultrasonic testing in C-scope image. The purpose was to investigate the location and size of cracks by SAM and AE technique, whose experimental data demonstrate good for detecting microcracks.

• 한국세라믹학회지
• /
• 제17권3호
• /
• pp.151-157
• /
• 1980

Crystallization phenomena of glasses of fused natural basalt rocks were studied by DTA, X-ray phase analysis, electron microscopy, and other techniques. Crystallization was catalyzed by the addition of either chromite ore or $P_2O_5$, both up to 5 wt %. Various heat treatments were used, and their influences on controlling the microstructures and properties of the products were studied to develop high strength glass-ceramic material of the $CaO-Al_2O_3(Fe_2O_3)-MgO(FeO)-SiO_2$ system from the domestic basalts. Magnetite precipitates were found to be a nucleation initiator in every case of the crystallization. Diopside, anorthite, clinoenstatite and monticellite were identified as silicate crystalline phases contained in the crystallized products. The crystallite size was in the range of 0.1-2.5$\mu\textrm{m}$. The fine crystallites were approximately cubic, but large crystallites were either plate or needle shape. The thermal expansion coefficient, microhardness and modulus of rupture of glass-ceramics were ranged from 78.5 to 81.8$\times$10-7 cm/cm/$^{\circ}C$, from 820 to 930kg/$\textrm{mm}^2$, and from 1800 to 2800kg/$\textrm{cm}^2$, respectively.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2002년도 학술발표논문집
• /
• pp.48-50
• /
• 2002

오이의 원산지는 열대지방으로 생육 적온이 25-3$0^{\circ}C$ 정도로 매우 높다. 그러나 사계절이 뚜렷한 국내 기후 특성 상 생육적온 이하의 환경과 이상의 환경을 경험하게 된다. 시설오이는 온실에서 재배되기 때문에 계절에 따라 고온과 저온 스트레스를 받기 쉽다. 이 가운데 환기를 적극적으로 실시하는 여름철과 봄, 가을에는 밀폐된 공간의 특성상 열집적현상으로 환기가 제대로 이루어지지 않아 고온장해를 받는 경우가 많다. (중략)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.127-133
• /
• 1991

Acoustic microscopy has attracted much intrest recently as potential mondestructive evalution technique for detecting and sizing defects of surface and sub-surface. Also acoustic emission testing method has been developed for detecting microcracks which is more than 30 umm in length quintitatively on ceramics material. In the present paper, acoustic emission during the four point bending test in hot-pressed sintered Si$\_$3/N$\_$4/ specimen which was stressed bythermal shock has been measured by high sensitive sensing system. The surface and sub-surface cracks were detected by scanning acoustic microscope of 800 MHz and conventional ultrasonic testing in C-scope image. The purpose was to investigate the location and size of cracks by SAM and AE technique, whose experimental datas demontrates good agreement for detecting microcracks.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.97-100
• /
• 2006

This paper report the result of the investigation on the properties of drying shrinkage for alkali-activated slag mortar in different relative humidity Commonly we know that drying shrinkage means lost more moisture but the mechanism of drying shrinkage of alkali activated slag mortar is not entirely due to the quantity of weight loss of water from mortar. pore size distribution and the calcium silicate hydrate gel characteristics have a critical influence on the magnitude of drying shringkage to alkali activated slag mortar. For this investigation, Ca(OH)2, Na2SiO4 were as alkali activator with 5 dosages(6%, 9%, 12%, 15%, 20%) and curing condition were three different relative humidity(35%, 65%, 95%) at $20{\pm}3^{\circ}C$

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.779-784
• /
• 1992

In producing cordierite glass-ceramics by sintering, following experiments were conducted in order to determine the optimum heat-treatment schedule for high-crystallinity and dense sintered body. The glass composition of 11.67MgO-29.46Al2O3-52.88SiO2-5P2O5-1B2O3 (wt%) was selected on the basis of the early experiment. The 3-step heat treatment schedule was determined by the results of DTA, Dilatometric measurement and high-temperature XRD, where the particle-size-controlled glass powder was used. The degree of densification and the crystallinity were evaluated by the measurement of the bulk density and X-ray scattering intensity. The specimen fired with the optimum conditions showed ${\alpha}$-cordierite phase, relative density ∼98%, crystallinity ∼92%, thermal expansion coefficient ∼30${\times}$10-7/$^{\circ}C$, dielectric constant ∼5.5 and resistivity ∼1.0${\times}$1012 {{{{ OMEGA }}cm, respectively.

• 한국세라믹학회지
• /
• 제38권5호
• /
• pp.474-478
• /
• 2001

유기 화학 기상 증착법(MOCVD)을 이용하여 반응기체 $O_2$의 양 및 Y와 Mn의 운반기체 비(Y/Mn)를 변화시켜가며 Si(100) 기판 위에서 MFSFET(metal-ferroelectric-semiconductor field effect transistor) 구조의 YMnO$_3$박막을 증착하였다. 반응기체 $O_2$의 양이 150sccm일 때 Y/Mn=2와 3인 경우 단일상의 육방정계 YMnO$_3$박막이 형성되었다. YMnO$_3$박막의 전기적 특성은 사방정계 YMnO$_3$박막에서는 나타나지 않았으나, 육방정계 YMnO$_3$박막의 경우 결정립 크기에 영향을 받아 단일상의 육방정계 YMnO$_3$박막 중 결정립 크기가 150nm~200nm(Y/Mn=2)인 경우에는 잔류분극이 100nC/$ extrm{cm}^2$인 P-E 이력곡선의 특성을 나타내었다.