• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2008년도 Spring Scientific Meeting(the 129th) of Korean Academy if Conservative Dentistry
• /
• pp.224-234
• /
• 2008

이 연구의 목적은 6종의 자가부식 프라이머 접착시스템에서 제조사에서 추천한 프라이머 적용시간과 2배의 프라이머 적용시간에 따른 법랑질에 대한 미세전단 결합강도와 전자현미경적 소견을 비교하기 위하여 시행하였다. 이 연구의 결과 법랑질에 대한 자가부식 프라이머 접착제의 결합강도는 제조사에서 추천한 프라이머의 적용시간보다 프라이머의 적용시간을 2배 증가시킨 경우 높게 나타났으며, 특히 pH가 높은 프라이머를 사용하였을 때 통계학적으로 높은 결합강도를 나타내었다. 이는 법랑질에서 pH가 높은 프라이머를 사용할 경우, 제조사에서 추천한 시간보다 더 긴 시간동안 적용하는 것이 결합강도를 증가시킬 수 있을 것으로 생각된다.

• 접착 및 계면
• /
• 제6권3호
• /
• pp.19-25
• /
• 2005

합성 고무계 점착제는 일반적으로 SIS나 SBS 블록 공중합체와 점착부여수지, 가소제, 기타 첨가제를 함유한다. SIS/SBS 계 점착제는 우수한 접착력에도 불구하고 내용제성이나 내열성이 낮아서 그 사용에 한계가 있다. 이에 이러한 단점을 보완하고자 SIS/SBS 점착제에 가교제, 광개시제를 주성분으로 하는 자외선 경화 시스템을 도입하였다. 제조된 점착제는 thiol-ene 광중합 반응에 의해 가교하였으며 점착제의 프로브 택(probe tack), 박리강도(peel strength) 전단접착파괴온도(shear adhsion failure temperature, SAFT)를 측정하여 UV 경화형 점착특성을 고찰하였다. 또한 UV 경화형 점착제의 택 성질을 프로브 택을 이용하여 프로브 재료별, 점착제의 두께별의 영향을 살펴보았고 접촉각 측정을 통해 점착제 표면 변화를 살펴보았다.

• Restorative Dentistry and Endodontics
• /
• 제33권3호
• /
• pp.224-234
• /
• 2008

이 연구의 목적은 6종의 자가부식 프라이머 접착시스템에서 제조사에서 추천한 프라이머 적용시간과 2배의 프라이머 적용시간에 따른 법랑질에 대한 미세전단 결합강도와 전자현미경적 소견을 비교하기 위하여 시행하였다. 이 연구의 결과 법랑질에 대한 자가부식 프라이머 접착제의 결합강도는 제조사에서 추천한 프라이머의 적용시간보다 프라이머의 적용시간을 2배 증가시킨 경우 높게 나타났으며, 특히 pH가 높은 프라이머를 사용하였을 때 통계학적으로 높은 결합강도를 나타내었다. 이는 법랑질에서 pH가 높은 프라이머를 사용할 경우, 제조사에서 추천한 시간보다 더 긴 시간동안 적용하는 것이 결합강도를 증가시킬 수 있을 것으로 생각된다.

• Restorative Dentistry and Endodontics
• /
• 제30권4호
• /
• pp.319-326
• /
• 2005

본 연구는 단일 단계 접착제의 표층과 심층 상아질에 대한 미세인장 결합강도의 차이를 평가하기 위해서 시행되었다. 발거된 상$\cdot$하악 대구치의 교합면측에 있는 표층 상아질과 심층 상아질을 각각 15개씩 노출시킨 후, 사용된 접착제에 따라 AQ군, L-Pop군, Xeno군으로 분류하여 복합레진을 축조하였다. 각 시편은 상아질과 복합레진 계면의 단면적이 $1.0mm^2$이 되도록 절단하였고, 각 군 당 20개의 시편을 사용하였다. 각 군의 미세인장 결합강도의 측정하여 다음과 같은 결과를 얻었다. 표층과 심층 상아질 모두에서 Xeno III는 다른 접착제보다 가장 높은 결합강도를 나타내었다 (p<0.05). 또한 모든 접착제는 심층 상아질에서 보다 표층 상아질에서 더 높은 결합강도를 나타내었으나 이들 간에 통계학적 인 유의성은 접착제의 종류에 따라 다르게 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.247-252
• /
• 2000

The advantages of transdermal administration are avoiding hepatic first pass effect, minimizing inter- and intra-patient variation, maintaining steady-state plasma level to provide long-term therapy from a single dose, and allowing a rapid termination of drug input. Clenbuterol, a selective ${\beta}_2-adrenergic$ receptor stimulant, has been introduced as a potent bronchodilator for patients with bronchial asthma, chronic obstructive bronchial disease. For the development of transdermal systems containing clenbuterol, two limiting factors - long lag time and low flux - must be overcome. In this study, we attempted to select optimal formulation for preparation of clenbuterol patch using hairless mouse skin and flow-through diffusion cell. The flux of clenbuterol increased as the percent of clenbuterol dose dependently in the concentration range of 5-15%. Based on this result, we fixed the concentration of clenbuterol as 15%. The effect of various penetration enhancers on percutaneous absorption of clenbuterol through hairless mouse skin was investigated. Labrafil was the most effective enhancer, which increased the permeability of clenbuterol approximately 4-fold compared with the control without penetration enhancer. Optimal enhancer concentration was 3%. The effect of various adhesives on penetration of clenbuterol was also investigated. Among the adhesives studied, MA-31 was the most effective adhesive. Furthermore, the clenbuterol patch composed of 15% clenbuterol, 3% Labrafil and 82% MA-31, which gave most excellent penetration of drug in in vitro penetration study, maintained therapeutic plasma levels in in vivo study using S.D. rats. These studies demonstrated a good feasibility of clenbuterol administration through the intact skin using a transdermal patch, and show a possibility of the development of clenbuterol patches.

• Journal of Pharmaceutical Investigation
• /
• 제34권6호
• /
• pp.477-482
• /
• 2004

The aim of the present study was to investigate the efficacy of a mixed gel formulation composed of sodium carboxymethyl cellulose and gellan gum (Na-CMC gel) for the prevention of adhesions after laminectomy. The anti-adhesive effect of the Na-CMC gel was tested in a controlled randomized study using an animal model of lumbar laminectomy. The animals (60 female Sprague-Dawley rats) were randomly allocated into two treatment groups to receive the Na-CMC gel on the injured area or no gel (control). The incidence of adhesions and their grade were blindly evaluated at 4, 8 and 12 weeks after surgery. The amount of scar tissue and tenacity were grossly reduced by the Na-CMC gel at postoperative 4, 8, and 12 weeks. The mean adhesion scores were 0.75, 1.25, and 1.38 at 4, 8, and 12 weeks in the gel-treated group, respectively. No significant inflammatory reaction was observed and the healing of wound was not affected by the Na-CMC gel. The Na-CMC gel reduced the amount of scar formation and tenacity in rat laminectomy model without affecting the healing of operation wound and other complications. Therefore, the Na-CMC gel may be the potential to prevent postsurgical adhesions in clinical state.

• Fisheries and Aquatic Sciences
• /
• 제24권11호
• /
• pp.375-382
• /
• 2021

In this study, the reproductive behavior and embryonic and larval development of the short ninespine stickleback Pungitius kaibarae was described and illustrated based on observations during spawning, hatching, and larval rearing trials. Adult P. kaibarae were collected downstream in Jinhae during the reproductive season (April-May). Males had nuptial coloration on their entire black bodies, with blue dorsal spines and yellow eyes, whereas females had a brown spotted pattern on their bodies. Males built nests on the stems of water weeds and attracted females. Fertilization occurred in the nest immediately after spawning, and males guarded the eggs until hatching. The fertilized eggs of P. kaibarae were spherical, demersal, adhesive, and transparent, and each egg measured 1.43 ± 0.07 mm in diameter. The morula, blastula, and gastrula stages, as well as hatching began at 5, 18.5, 21.5, and 96 post fertilization (HPF), respectively, at 20.0 ± 0.5℃. The newly hatched larvae had a total length (TL) of 5.67 ± 0.50 mm, with a yolk volume of 0.583 ± 0.059 mm³. Their mouths and anuses had not yet opened. At 2 days posthatching (days post hatching, DPH), the yolk was completely absorbed and the larvae began to feed exogenously. Pigmentation was observed in freshly hatched larvae 4 h after hatching, with the presence of eight areas with a dotted pattern on the dorsal surface of the larvae and dispersed spots on the head and yolk sac. At 30 DPH, the TL of the juveniles was 21.34 ± 1.70 mm. The nest area and number of eggs were 259.56 ± 101.39 mm² (75.18-506.04) and 155.33 ± 114.12 (0-437), respectively.

• 대한두개안면성형외과학회지
• /
• 제23권5호
• /
• pp.228-231
• /
• 2022

Fibrin glue is a topical agent widely used for hemostasis, wound healing, and surgical adhesion. Complications of fibrin glue itself are extremely rare because it is absorbed over time, but can occur as a result of inappropriate application. We report a case of a postoperative complication caused by inappropriate application of fibrin glue in blow-out fracture surgery. A 65-year-old male patient presented with periorbital swelling and an open wound on the right infraorbital area. Computed tomography showed a right orbital floor fracture. After reduction of the herniated tissue into the orbit, an implant was inserted and fibrin glue was applied to stabilize the implant. This procedure was performed without difficulty, but the patient complained of persistent diplopia and limited eyeball movement after surgery. An imaging study showed a mass-like lesion, which was not a hematoma, in the orbital cavity. In a second operation, the mass was identified as clotted fibrin glue that had not been applied properly. After removal, the patient's symptoms were relieved without further complications. Appropriate and careful application of fibrin glue is necessary to avoid unnecessary complications.

• 한국광학회지
• /
• 제35권4호
• /
• pp.170-174
• /
• 2024

대기 중 레이저 빔 전파 시 대기 난류에 의한 악영향을 해소하고 빔품질을 향상시키기 위해서 적응광학을 사용한다. 본 논문에서는 장거리 레이저 전송을 위한 적응광학계의 핵심 부품인 변형거울의 정밀 조립 방법을 제안한다. 변형거울은 거울판과 구동기, 플렉셔(flexure)로 구성되며 이 부품들을 정밀하게 조립하는 것이 성능을 좌우한다. 본 논문에서는 지그의 설계/제작을 통해 고밀집 다채널 실리콘-카바이드 변형거울을 완성했으며, 변형거울 성능 확인을 통해 제안한 방법의 유효성을 검증했다.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.599-610
• /
• 2005

Purpose: The success of the bonding between electroformed gold and ceramic is dependent on the surface treatment of the pure gold coping. The purpose of this study was to evaluate the bonding strength between the electroformed gold and ceramic with varying surface treatment. Materials and methods: A total of 32 disks,8 were using conventional ceramometal alloy, 24 were using electroforming technique as recommended by manufacturer, were prepared. 24 electroformed disks were divided 3 groups according to surface treatment, i.e. 50 microns aluminium oxide sandblasting(GES-Sand), gold bonder treatment(GES-Bond) and $Rocatec^{TM}$ system(GES-Rocatec). For control group of conventional alloy 50 microns aluminium oxide treatment was done(V-Supragold). Energy dispersive x-ray analysis and scanning electron microscope image were observed. Using universal testing machine, shear bond strength and bonding failure mode at metal-porcelain interface were measured. Results and Conclusion: The following conclusions were drawn: 1. In the energy dispersive x-ray analysis, the Au was main component in electroformed gold(99.9wt%). After surface treatment, a little amount of $Al_2O_3(2.4wt%)$ were found in GES-Sand, and $SiO_2(4wt%)$ in GES-Bond. In GES-Rocatec, however, a large amount of $SiO_2(17.4wt%)$ were found. 2. In the scanning electron microscopy, similar pattern of surface irregu larities were observed in V-Supragold and GES-Sand. In GES-Bond, surface irregularities were increased and globular ceramic particles were observed. In GES-Rocatec, a large amount of silica particles attached to metal surface with increased surface irregularities were observed. 3. The mean shear bond strength values(MPa) in order were $22.9{\pm}3.7(V-Supragold),\;22.1{\pm}3.8(GES-Bond),\;20.1{\pm}2.8(GES-Rocatec)\;and\;13.0{\pm}1.4(GES-Sand)$. There was no significant difference between V-Supragold, GES-Bond, and GES-Rocatec. (P>0.05) 4. Most bonding failures modes were adhesive type in GES-Sand. However, in V-Supragold, GES-Bond and GES-Rocatec, cohesive and combination failures were commonly observed. From the result, with proper surface treatment method electroformed gold may have enough strength compare to conventional ceramometal alloy.