• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.261-264
• /
• 2007

In this study, the consolidation and casting processes of fine Si powders, by-products of making high purity Poly-Si rods in the current method, were systematically investigated for use as economical solar-grade feedstock. Morphology, size, and contamination type of the poly-Si fine powders were inspected by combined analysis of SEM, particle size analyzer, and FT-IR. Poly-Si powder compacts were tried to fabricate by a consolidation process without a binding agent and then their density ratio and strength were evaluated. Finally, the electrical resistivity of the specimens prepared by an electromagnetic casting method was examined for purity assessment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.91-96
• /
• 2001

Ultrafine particles have been widely used in many high technology industrial areas. The spherical nonagglomerated and uniform nanometer-size $SiO_{2}$ particles are synthesized by the injection of TEOS vapor, ions and reaction gas in furnace. Ions were generated by Corona discharge electrode and these ions charge $SiO_{2}$ particles. As a result, spherical, nonagglomerated and ultrafine particles are generated in various conditions, it's morphology, charging portion and size distribution are examined by using TEM, ESP and SMPS. As the applied voltage of electrode changes from 0 kV to 5.0 kV, it is observed that the mean diameter of $SiO_{2}$ particle decreases from 94 nm to 42 nm.

• 열처리공학회지
• /
• 제18권3호
• /
• pp.157-163
• /
• 2005

Effects of refinement of primary Si and residual stress on the mechanical properties of Aluminum B.390 alloy have been examined. Calcium was found to have an effect on the size of primary silicon particles. Primary silicon particle was refined as Ca content decreased. Refinement of primary Si particles led to an improvement in mechanical properties of the alloy; increase of elongation was prominent, above all. By the increase of compressive residual stress in the matrix alloy, tensile strength increased but elongation decreased.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.808-811
• /
• 2002

In thixoforming process, the size of Si particles is changed by many parameters of forming. Especially, reheating and heat treatment are very important parameters. It was found that the mechanical properties was significantly improved by the thixoforming process. In this study, to investigate the relation between the mechanical properties and Si particles, the experiment of semi-solid die casting has been performed. Large suspension part with A356 alloy was fabricated with controlled ram speed. The effect of the size and shape of silicon particles on microstructure of tensile test has been investigated.

• 자원리싸이클링
• /
• 제19권5호
• /
• pp.31-43
• /
• 2010

석탄가스화 복합발전 시스템의 집진설비용 다공성 탄화수소 캔들 필터 제조를 위해 래밍성형과 진공 압출성형 공정에 외해 캔들필터 성형체를 제조하였다. 다양한 입도를 갖는 탄화규소 분말을 출발원료로 하였으며, 비점토계 무기 소결조제로 뮬라이트와 칼슘 카보네이트 분말을 사용하였다. 래밍성형과 진공 압출성형에 의한 캔들 필터 성형체들은 대기 분위기 $1400^{\circ}C$에서 2시간 소성하여 제조하였다. 캔들 필터 성형공정과 출발원료 입도가 소결된 다공성 캔들 필터 지지층의 기공율, 밀도, 강도 (굽힘강도, 압축강도)와 미세구조에 미치는 영향을 조사하였다. 래밍성형 공정에 외한 제조원 다공성 탄화규소 캔들 필터 소결체가 압출성형된 필터에 비해 높은 밀도 및 강도를 나타내고 있었으며, 그 최고 값은 각각 $2.0\;g/cm^3$과 45 MPa이었다. 한편 캔들 필터 지지층의 장기 내식성 평가 예측을 위하여 소결된 시편에 대해 석탄가스화 복합발전 $600^{\circ}C$의 모사 합성가스 분위기에서 2400시간 부식실험을 수행하였다.

• 한국주조공학회지
• /
• 제20권4호
• /
• pp.254-259
• /
• 2000

Metal matrix composites(MMCs) reinforced with hard particles have many potential application in aerospace structures, auto parts, semiconductor package, heat resistant panels, wear resistant materials and so on. In this work, the effect of SiC partioel sizes(50 and 100 ${\mu}m$) and additional elements such as Si, Cu and Ti on the microstructure and the wear property of $Al-5Mg-X(Si,Cu,Ti)/SiC_p$ composites produced by pressureless infiltration method have been investigated using optical microscopy, scanning eletron microcopy(SEM) with EDS(energy dispersive spectrometry), hardness test, X-ray diffractometer(XRD) and wear test. In present study, the sound $Al-5Mg-X(Si,Cu,Ti)/SiC_p$(50 and 100 ${\mu}m$) composites were fabricated by pressureless infiltration method. The $Al-5Mg-0.3Si-O.1Cu-O.1Ti/SiC_p$ composite with $50 {\mu}m$ size of SiC particle has higher hardness and better wear property than any other composite with $100{\mu}m$ size of SiC particle produced by pressureless infiltration method. The hardness and wear property of $Al-5Mg/SiC_p$(50 and 100 ${\mu}m$) composites were enhanced by the addition of Si, Cu and Ti in Al-5%Mg matrix alloy.

• 한국세라믹학회지
• /
• 제44권12호
• /
• pp.747-750
• /
• 2007

The thermal conductivities of nano-sized fumed silica-based insulation media were investigated by varying a mean particle size of the silicon carbide opacifiers and ceramic fiber content. Opacifying effect of ceramic fiber and silicon carbide powders was discussed in terms of their content and the mean particle size of them. As the fiber contents increased from 10 wt% to 30 wt% in a material, its thermal conductivity at temperatures of about $620^{\circ}C$ decreased from 0.171 $Wm^{-1}K^{-1}$ to 0.121 $Wm^{-1}K^{-1}$. Meanwhile, the thermal conductivity at temperatures of about $625^{\circ}C$ decreased from 0.128 $Wm^{-1}K^{-1}$ to 0.092 $Wm^{-l}K^{-1}$ as the mean SiC particle size decreased from $31{\mu}m$ to $10{\mu}m$.

• 한국주조공학회지
• /
• 제20권5호
• /
• pp.300-306
• /
• 2000

The objective of this work was to investigate the effects of SiC particle size(50, 100 ${\mu}m$) and additional elements such as Si, Cu and Ti on aging behavior in Al-5Mg-X(Si,Cu,Ti)/SiCp composites fabricated by pressureless infiltration method using hardness and wear test, scanning electron microscopy(SEM) and differential scanning calorimetry(DSC). The peak aging time in Al-5Mg-X(Si, Cu, Ti)/SiCp(50, 100 ${\mu}m$) composites is shorter than Al-5Mg-0.3Si alloy.The peak aging time of 50 ${\mu}m$ SiC particle reinforced Al-5Mg-X(Si,Cu,Ti) composites is shorter than those of 100 ${\mu}m$ SiC particle reinforced of Al-5Mg-X(Si,Cu,Ti) composites. The Al-5Mg-0.3Si-0.1Cu-0.1Ti/SiCp(50 ${\mu}m$) composites aged at $180^{\circ}C$ has higher hardness and better wear resistance than any other aged composite.The aging effect is promoted by the addition of Si and Cu in Al-5Mg/SiCp composites, so the wear resistance of Al-5Mg/SiCp composites with Si and Cu elements is enhanced by the aging treatment.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.62-68
• /
• 2004

본 연구에서는 SHS 공정에 의하여 기공의 크기를 조절함으로서 전기저항 발열 특성을 가지는 다공성 $MoSi_2$를 제조하는 공정에 관하여 연구하였다. 결함이 억제된 다공질 재료를 제조하기 위하여 Si 함량 변화 및 예열 공정을 실시하였으며, 성형체 제조에 사용되는 Mo 분말의 크기 변화에 따른 가공 형성 거동에 대하여 연구하였다. 실험 결과 합성된 $MoSi_2$ 입자의 크기는 Mo 입자의 크기와는 관계없이 연소 합성시 발열되는 발열양에 의해 좌우되었으며, 기공의 크기는 Mo 입자의 크기에 따라 결정되었다. 또한 가공 경사 $MoSi_2$ 다공질 재료를 만들기 위하여 150-300${\mu}m$ Mo 분말과 4-5${\mu}m$ Mo 분말을 단계별로 5층으로 혼합하여 합성한 결과 거시적으로 순차적인 기공 크기 분포를 나타내었으며, 이를 통하여 포집 효율등이 우수한 다공성 발열체 재료의 제조가 가능하였다.

• 산업기술연구
• /
• 제16권
• /
• pp.157-168
• /
• 1996

The deposition characteristics of ultrafine $SiO_2$ particles were investigated in a tube furnace reactor theoretically and experimentally controlling tube wall temperature in deposition zone. The model equations such as mass and energy balance equations and aerosol dynamic equations inside reactor and deposition tube were solved to predict the particle growth and deposition. The particle size and deposition efficiencies of $SiO_2$ particles were calculated, changing the process conditions such as tube furnace setting temperature, total gas flow rate inlet $SiCl_4$ concentration and were compared with the experimental results.