• Transactions on Electrical and Electronic Materials
• /
• v.9 no.2
• /
• pp.67-72
• /
• 2008

Al-doped p-type ZnO thin films were fabricated by RF magnetron sputtering on n-Si (100) and homo-buffer layers in pure oxygen ambient. ZnO ceramic mixed with 2 wt% $Al_2O_3$ was selected as a sputtering target. XRD spectra show that the Al-doped ZnO thin films have ZnO crystal structure. Hall Effect experiments with Van der Pauw configuration show that p-type carrier concentrations are arranged from $1.66{\times}10^{16}$ to $4.04{\times}10^{18}\;cm^{-2}$, mobilities from 0.194 to $198\;cm^2V{-1}s^{-1}$ and resistivities from 0.0963 to $18.4\;{\Omega}cm$. FESEM cross section images of different parts of a p-type ZnO:Al thin film annealed at $800^{\circ}C$ show a compact structure. Measurement for same sample shows that density is $5.40\;cm^{-3}$ which is smaller than theoretically calculated value of $5.67\;cm^{-3}$. Photoluminescence (PL) spectra at 10 K show a shoulder peak of p-type ZnO film at about 3.117 eV which is ascribed to electron transition from donor level to acceptor level (DAP).

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.608-612
• /
• 2010

Uvarovite Garnet is green pigment prepared by using $Cr_2O_3$, CaO and $SiO_2$ which are widely used in ceramic industry. The synthesis of above pigment was carried out by mixing $K_2Cr_2O_7$, $SiO_2$ and $CaCO_3$ as formulated and then firing at $1000{\sim}1200^{\circ}C$. To investigate the optimum synthesis condition of the Uvarovite Garnet. it was prepared by using CaO to replace $CaCO_3$, $CaF_2$ and $CaCl_2$. To get green brighter color, $Al^{3+}$ was substituted for $Cr^{3+}$. They were characterized by X-ray diffraction, UV-Vis spectroscopy, Raman spectroscopy and SEM analysis. When the pigments were applied to lime glazes (6 wt%), color parameters of Uvarovite Garnet showed the $L^*$=40.99, $a^*$=-16.23 and $b^*$=17.04.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.1
• /
• pp.24-27
• /
• 2009

N-doped ZnO thin films were deposited on n-type Si(100) and homo-buffer layer, and undoped ZnO thin film was also deposited on homo-buffer layer by RF magnetron sputtering method. After deposition, all films were in-situ annealed at $800^{\circ}C$ for 5 minutes in ambient of $O_2$ with pressure of 10Torr. X -ray diffraction shows that the homo-buffer layer is beneficial to the crystalline of N-doped ZnO thin films and all films have preferable c-axis orientation. Atomic force microscopy shows that undoped ZnO thin film grown on homo-buffer layer has an evident improvement of smoothness compared with N-dope ZnO thin films. Hall-effect measurements show that all ZnO films annealed at $800^{\circ}C$ possess p-type conductivities. The undoped ZnO film has the highest carrier concentration of $1.145{\times}10^{17}cm{-3}$. The photoluminescence spectra show the emissions related to FE, DAP and many defects such as $V_{Zn}$, $Zn_O$, $O_i$ and $O_{Zn}$. The p-type defects ($O_i$, $V_{Zn}$, and $O_{Zn}$) are dominant. The undoped ZnO thin film has a better p-type conductivity compared with N-doped ZnO thin film.

• Journal of the Korean Vacuum Society
• /
• v.3 no.3
• /
• pp.360-367
• /
• 1994

Si2H6PH3 혼합기체를 사용하여 증착된 in-situ P-doped 비정질 실리콘과 SiH4 기체를사용하여 증착한후에 As+ 이온주입에 의해 도핑시킨 다결정 실리콘 박막을 하부 전극으로 하는 캐패시터를 형성 하였다. 여기서 유전박막층은 자연산화막 화학증착된 실리콘질화막 및 질화막의 산화에 의해 형성된 O-N-O 구조를 갖는 것이었다. 두 종류의 하부전극에 따른 캐패시터의 전기적 특서을 조사하였다. 전기 적 특성으로는 정전용량, 누설전류, 절연파괴전압 및 TDDB 등이었다. 이 가운데 정전용량, 누설전류 및 절연파괴전압은 하부전극에 따라 큰 차이를 보이지않았다. 그러나 음의 전장하에서의 TDDB 특성은 in-situ P-doped 비정실 실리콘이 하부전극인 캐패시터가 As+ 이온 주입실리콘이 하부전극인 것에 비해 더우수하였다. 이와 같은 TDDB 특성의 차이는 하부전극 실리콘의 integrity 차이로 인한 자연산화막의 결함 정도의 차이에 기인하는 것 같다. 이를 뒷받침하는 것으로 투과전자현미경 단면사진으로 확인하였 다. Shallow junction을 유지하는데도 in-situ P-doped 비정실 실리콘은 만족할 만한 결과를 보이며 박 막자체의 면저항값도 낮출 수 있어 초고집적 회로의 캐패시터 전극으로서 이용될 수 있는 것으로 평가 되었다.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1555-1557
• /
• 2004

The Pt-doped $SnO_2$ thin film for CO sensor applications obtained by RF sputtering from a target of the same compound in an Ar-$O_2$ atmosphere. Pt-SnO2-SiC Schottky diode detection of CO gas Cause the remarkable change in electrical resistivity of the semiconductor. the good gas sensitivity is shown when annealing condition is 600$^{\circ}C$, 1hr in RTP and detected temperature is 350$^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.34 no.4
• /
• pp.436-442
• /
• 1997

The bimodal distribution of CuCl nano-crystals precipitated in alumino-borosilicate glass matrix (30SiO2-45B2O3-7.5Al2O3-7.5Na2O-7.5CaO-2.5GeO2(mole %)) was investigated by TEM and the temperature dependent optical spectroscopy. Two types of CuCl particles with different size were observed by TEM and it was confirmed by the splitting of Z3 absorption peak at low temperature and the occurrence of deflection point in the optical spectra with temperature.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.192-195
• /
• 2012

We reported diborane ($B_2H_6$) doped wide bandgap hydrogenated amorphous silicon oxide (p-type a-SiOx:H) films prepared by using silane ($SiH_4$) hydrogen ($H_2$) and nitrous oxide ($N_2O$) in a radio frequency (RF) plasma enhanced chemical vapor deposition (PECVD) system. We improved the $E_{opt}$ and conductivity of p-type a-SiOx:H films with various $N_2O$ and $B_2H_6$ ratios and applied those films in regards to the a-Si thin film solar cells. For the single layer p-type a-SiOx:H films, we achieved an optical band gap energy ($E_{opt}$) of 1.91 and 1.99 eV, electrical conductivity of approximately $10^{-7}$ S/cm and activation energy ($E_a$) of 0.57 to 0.52 eV with various $N_2O$ and $B_2H_6$ ratios. We applied those films for the a-Si thin film solar cell and the current-voltage characteristics are as given as: $V_{oc}$ = 853 and 842 mV, $J_{sc}$ = 13.87 and 15.13 $mA/cm^2$. FF = 0.645 and 0.656 and ${\eta}$ = 7.54 and 8.36% with $B_2H_6$ ratios of 0.5 and 1% respectively.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.650-655
• /
• 2002

$SiO_2$ gels containing dispersed fine Te metal particles have been prepared by the sol- gel method using a starting solution containing Tetraethoxy Silane (Si($OC_2$ $H_{5}$ )$_4$), $H_2$O, Ethylalchol ($C_2$$H_{5}$OH), Nitric Acid ($HNO_3$) and Tellurium Tetracholoride ($TeCl_4$) in a several molar ratio. Gelling time of sols was about 3 days and viscosity of solution was very low about 2~3 cP for 3 days. Heat-treatments of the gel have been performed at 500, 700, 900, 1100 and $1300^{\circ}C$ for 1 hour, respectively. We have investigated TG-DTA, X-ray diffraction patterns and SEM of heat-treatmented gels. The size of Te fine particles dispersed in $SiO_2$ gel was about 0.8~1 $\mu\textrm{m}$ and the shape was almost quadrangle.

• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.137-140
• /
• 2006

In this report, Europium doped strontium barium gallium silicate ((Sr,Ba)2Ga2SiO7:Eu2+) phosphor has been synthesized by conventional solid-state method and investigated luminescent characteristic. Appropriate proportions of the raw materials were mixed in an agate mortar with acetone to obtain starting mixtures. Also, this phosphor was prepared by simple process under the reduction atmosphere (25% H2/75% N2). This phosphor can be applicated to the green phosphor for white LED because it has green emission band (513 nm), which emits efficiently under the 405nm excitation energy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.288-292
• /
• 1998

In this paper, we fabricated $SnO_2$ composite ceramics doped with 0~20mol% $SnO_2$ of bulk type to investigate the CO and $H_2$ gas sensitivity in various composition, temperature, and concentration of CO and $H_2$ gas. At the temperature range from $100^{\circ}C\sim425^{\circ}C$, the measured 1000ppm and 250ppm CO gas sensitivities of $SiO_2-SnO_2$composite ceramics were about 1.0~7.6 and 1.0~5.6, respectively. These values were about 1.0~1.5 times larger than pure $SnO_2$. The maximum 1000ppm CO gas sensitivity of $SiO_2-SnO_2$composites were measured around $325^{\circ}C$. At the temperature range from $270^{\circ}C\sim380^{\circ}C$, the 1000ppm and 500ppm $H_2$gas sensitivities of $SiO_2-SnO_2$ composites were about 2.9~21.2 and 2.1~11.3, respectively. Also the maximum 1000, 500 ppm $H_2$ gas sensitivities of samples were measured around.